Look what I scored! Would you be interested in one as well? - 2003-04 Mach 1 Registry Owners Club

swoop1156 · 01-21-2008, 05:09 PM

Hey all,

I swung in this place on the side of the road that was called, "Mustang Performance" here in Pensacola. Was kinda new there, never really saw it before, but saw a few nice rides out front.

Honestly, the shop is kinda dumpy a little and the guys are a little bit hootin' and hollarin' country boys, but this is what I saw from a quick look around:

A $1,000 Foose hood for an S-197 Mustang

Two Visus louvers for New Edge's -- he said he can get more brand-new, anytime, anyday..? Thought they were done being made?

A few turbo systems, CDC Shaker system for a S197, a few exhausts, stock take off wheels, intakes, and...

A WHOLE BOX OF THESE!!!

I almost **** myself when I saw a box, direct from Ford, sent to this guy. I mean, he said he had hookups but the shop was nothing impressive. I mean, he has a $1,000 hood just tossed in the corner!

Anyway, I contained my excitement but said that I would be very interested in obtaining some of those Mach1 posters. He grabbed one from the box, it ripped. He cussed and threw it on the ground. He then grabbed another one and handed it to me. I said, "How much?" and he just said not to worry about it.

I stated that I was on a global Mach1 message board and that I would most likely have some other members interested in one. He said to get back with him and he would cut me a deal on getting a bunch.

My question to you all, is how much would you be willing to buy one for? I don't know if they are hard to come by or anything like that, but they are the real deal and HUGE. The picture above, those shoes are size 14 Mens. It's big.

Anyway, I could ship them to you in one of those roll things so it wouldn't be folded and whatnot. Let me know if you could be interested in one of these and let me know what you might be willing to pay.

I won't make a dime off you guys, just pay shipping.

Lemme know!

rich1 · 01-21-2008, 05:17 PM

Wow, good find ! PM me when you get a deal worked out .I need 2 posters .Thanks!

Shinigami · 01-21-2008, 05:21 PM

wow, I'd LOVE one.

FloridaOrange · 01-21-2008, 05:28 PM

I wouldn't mind one to hang in the garage but it all depends on the $$. If it's cheap I'll grab one, if not, the fishing rods take up the wallspace.

MCHNROL · 01-21-2008, 05:34 PM

How much for some visus louvers? From what zip or need mine?

mach460 · 01-21-2008, 05:34 PM

I like the shoes instead of the ruler,,nice

anyway I have one of them hanging in my garage
four years now picked it up at carlisle I think it
was like five buck's,,,,nice find.................

TorchMach1 · 01-21-2008, 05:43 PM

I would think that $10 including shipping would be worth it. I don't really know what it would cost for the shipping tube and shipping. See how much the guy wants to sell them for.

Azure Blurr · 01-21-2008, 05:48 PM

Need poster! PM with details when you aquire!

JDraper · 01-21-2008, 06:05 PM

Quote:

Originally Posted by Azure Blurr

Need poster! PM with details when you aquire!

What he said!

NoChew_Blue03 · 01-21-2008, 06:11 PM

I would want quantity of 2 as long as it is no more than $15-20 total per item plus shipping.

Nice find and thanks for sharing it!

The Abyss · 01-21-2008, 07:29 PM

I'd take one. Let me know about the louvers as well please. I'd love a set of Visus.

THROTTLE · 01-21-2008, 07:30 PM

I'd buy one as long as it's less than $20 shipped.

Charles236 · 01-21-2008, 07:40 PM

I need one as well.

jeff33702 · 01-21-2008, 07:58 PM

Im in. $10-15 plus shipping seems reasonable to me.

MachOneRider · 01-21-2008, 08:28 PM

I would like one as well. let me know

Mach1Man04 · 01-21-2008, 08:52 PM

i want 2 of them if you do get them i think 10-15$ should be reasonable let me know

20dsgmach03 · 01-21-2008, 09:21 PM

i would be down depending on how much i'd like 2

bris09 · 01-21-2008, 09:30 PM

I'm interested and awaiting the details.

TJ4Cam · 01-21-2008, 09:41 PM

I am in for one in that price range too!

No1Ford · 01-21-2008, 10:22 PM

I'll take one to! Let us know thanks.

DSG2003Mach1 · 01-21-2008, 10:25 PM

Quote:

Originally Posted by jeff33702

Im in. $10-15 plus shipping seems reasonable to me.

I had some i picked up at FFW i think it is was and they got damaged in the move

SnowDeath · 01-21-2008, 10:34 PM

I'm in for a poster as well! Let me know if the deal goes through!

32VALVR · 01-21-2008, 10:44 PM

I'm interested.

mach1 obsessed · 01-21-2008, 11:16 PM

Count me in!

muzman · 01-22-2008, 01:38 AM

Would love one, don't care what postage costs to NZ, let me know if its a go.

01-21-2008, 05:09 PM	#1
swoop1156 Parked again... Join Date: Jul 2006 Location: Pensacola, Florida Posts: 2,041	Look what I scored! Would you be interested in one as well? Hey all, I swung in this place on the side of the road that was called, "Mustang Performance" here in Pensacola. Was kinda new there, never really saw it before, but saw a few nice rides out front. Honestly, the shop is kinda dumpy a little and the guys are a little bit hootin' and hollarin' country boys, but this is what I saw from a quick look around: A $1,000 Foose hood for an S-197 Mustang Two Visus louvers for New Edge's -- he said he can get more brand-new, anytime, anyday..? Thought they were done being made? A few turbo systems, CDC Shaker system for a S197, a few exhausts, stock take off wheels, intakes, and... A WHOLE BOX OF THESE!!! I almost ** myself when I saw a box, direct from Ford, sent to this guy. I mean, he said he had hookups but the shop was nothing impressive. I mean, he has a $1,000 hood just tossed in the corner! Anyway, I contained my excitement but said that I would be very interested in obtaining some of those Mach1 posters. He grabbed one from the box, it ripped. He cussed and threw it on the ground. He then grabbed another one and handed it to me. I said, "How much?" and he just said not to worry about it. I stated that I was on a global Mach1 message board and that I would most likely have some other members interested in one. He said to get back with him and he would cut me a deal on getting a bunch. My question to you all, is how much would you be willing to buy one for? I don't know if they are hard to come by or anything like that, but they are the real deal and HUGE. The picture above, those shoes are size 14 Mens. It's big. Anyway, I could ship them to you in one of those roll things so it wouldn't be folded and whatnot. Let me know if you could be interested in one of these and let me know what you might be willing to pay. I won't make a dime off you guys, just pay shipping. Lemme know! __________________ Sold but not forgotten... 2004 Torch Red Mach 1 IUP / 5-Speed Mach #238576 Modifications \| Borla Stinger's \| Painted C&L Intake \| 15% Tint \| Powdercoated Valve Covers \| '01 Cobra Tails \| '04 Cobra Mirrors \| '01 Cobra Bumper \| '01 Bullitt Skirts \| FR500 Steering Wheel \| MGW Shifter \| 3/8" Spacer \| IAC Restrictor \| 17x9/10.5 Mach's \| 275/315 Vredestein's \| MM Subframe Connectors \| Tokico D-Spec's \| MM 4-Bolt C/C Plates \| H&R Super Sport's \| Build Number** \| #6935 of 7182

01-21-2008, 05:17 PM	#2
rich1 AUTOMACHTIC Join Date: Oct 2007 Location: RTP/ N.C. Posts: 4,813	Re: Look what I scored! Would you be interested in one as well? Wow, good find ! PM me when you get a deal worked out .I need 2 posters .Thanks! __________________ UPGRADES...Tokico Illuminas Borla SS Catback , Steeda Underdrives , Strut Brace , HPM Lower K Brace , L /C Arms , U /C Arms , HPM PanHard Bar, K&N FRPK 2, GOODYEAR GT1 , MRT- H-Pipe , JLT VaporTraps , SLP-12'" Tips! , FRPP Shorty 1 5/8 Headers , Brembo D/S & PBR D/S Rotors ,FRPP Alum.DS ,Roys 3/8 Spacer , SVT Focus 255 pump SCTsw Chip PRO-DYNOjet NA 300.01hp /315tq (Auto) ,Innovate W/B ,Compucar Wet Kit (90jet) + Heater and E Gauge * 360 hp/385tq 12.5 -1/4 @112

01-21-2008, 05:21 PM	#3
Shinigami Death God Join Date: Aug 2007 Location: Pennsylvania Posts: 770	Re: Look what I scored! Would you be interested in one as well? wow, I'd LOVE one. __________________ Black, 5spd, IUP, 4.10, SCT, MGW, BBK X, Borla Stinger Catback, K&N intake, PHP intake spacer :: Jon Lund tuned 300/332 Mustang dyno Since Tune: JLT RAI, Cobra 10th AE wheels, 90mm MAF, Accufab, March pulley set

01-21-2008, 05:28 PM	#4
FloridaOrange SCS Homie Join Date: Jan 2005 Location: Southwest Florida Posts: 3,643	Re: Look what I scored! Would you be interested in one as well? I wouldn't mind one to hang in the garage but it all depends on the $$. If it's cheap I'll grab one, if not, the fishing rods take up the wallspace.

01-21-2008, 05:34 PM	#5
MCHNROL original owner Join Date: Mar 2004 Location: Lou-a-vull, KY Posts: 1,556	Re: Look what I scored! Would you be interested in one as well? How much for some visus louvers? From what zip or need mine? __________________ Built 5/23 Bought 10/9/03 AFS:17x9&10.5rims, MRT:PRO-M MAF, Street Smart CAI, MagnaFlowH&catbackw/Mach tips, Hood struts, FRPP:REM 4.10 w/31-sp Mosers, Alum flywheel&driveshaft, PHP:spacer, Steeda:Tri-ax, UCA,strut towerbrace, HPM:Megabitejr.LCA,subframes, T/A:Girdle, Raptor:shiftlite, SLP:linelock, UPR:Quad&Adj NGK TR55IX CDC:floormats, honeycombtail&sequentials, gaugerings, Grippermat, ShakrAirDiverter, Bullittfueldoor, SilverStripes, BuildIDplates, Tint@35%, cats 298rwhp/318tq FUN!

01-21-2008, 05:34 PM	#6
mach460 Registered User Join Date: Nov 2002 Location: NE PA Posts: 547	Re: Look what I scored! Would you be interested in one as well? I like the shoes instead of the ruler,,nice anyway I have one of them hanging in my garage four years now picked it up at carlisle I think it was like five buck's,,,,nice find.................

01-21-2008, 05:43 PM	#7
TorchMach1 Registered User Join Date: Jun 2004 Location: Cincinnati, OH Posts: 311	Re: Look what I scored! Would you be interested in one as well? I would think that $10 including shipping would be worth it. I don't really know what it would cost for the shipping tube and shipping. See how much the guy wants to sell them for.

01-21-2008, 05:48 PM	#8
Azure Blurr I miss my friend Join Date: Jul 2006 Location: Middle Georgia Posts: 6,020	Re: Look what I scored! Would you be interested in one as well? Need poster! PM with details when you aquire! __________________ “Freedom itself was attacked this morning by a faceless coward and freedom will be defended.” “We will not tire, we will not falter, and we will not fail,” -George W. Bush

01-21-2008, 06:11 PM	#10
NoChew_Blue03 phones + drivers = danger Join Date: Nov 2005 Location: southern Illinois Posts: 269	Re: Look what I scored! Would you be interested in one as well? I would want quantity of 2 as long as it is no more than $15-20 total per item plus shipping. Nice find and thanks for sharing it!

01-21-2008, 07:29 PM	#11
The Abyss A dog with a gun. Join Date: Nov 2007 Location: Orem, Utah Posts: 357	Re: Look what I scored! Would you be interested in one as well? I'd take one. Let me know about the louvers as well please. I'd love a set of Visus. __________________ ...and if I have to come back here, it's gonna get real f*cking ugly.

01-21-2008, 07:30 PM	#12
THROTTLE Registered User Join Date: Feb 2007 Location: Minnesota Posts: 43	Re: Look what I scored! Would you be interested in one as well? I'd buy one as long as it's less than $20 shipped.

01-21-2008, 07:40 PM	#13
Charles236 Registered User Join Date: Aug 2005 Location: Greenville, SC Posts: 1,150	Re: Look what I scored! Would you be interested in one as well? I need one as well.

01-21-2008, 07:58 PM	#14
jeff33702 Registered User Join Date: Feb 2007 Location: St. Petersburg, FL Posts: 959	Re: Look what I scored! Would you be interested in one as well? Im in. $10-15 plus shipping seems reasonable to me. __________________ www.bestmustangparts.com for the BEST parts for your Mustang! 727-386-8088 Ask for prices on: Maximum Motorsports Steeda Forgeline Wheels JLT Intakes BMR Suspension SOLD 03 Mach 1 - 17lbs of Whipple 01 Cobra - 99% stock (Catback only) 68 Coupe - My first car ever 93 Coupe - www.93coupe.com

01-21-2008, 08:28 PM	#15
MachOneRider Registered User Join Date: Jan 2008 Location: Richmond, VA Posts: 44	Re: Look what I scored! Would you be interested in one as well? I would like one as well. let me know

01-21-2008, 08:52 PM	#16
Mach1Man04 Rock out wit yer Mach out Join Date: Jan 2007 Location: East Haven,Connecticut Posts: 880	Re: Look what I scored! Would you be interested in one as well? i want 2 of them if you do get them i think 10-15$ should be reasonable let me know __________________ 2004 Screaming Yellow Mach 1: 5-Spd IUP: 1 of 624 Born On Date 11-26-03 -MGW Short Shifter -CobraBob's Shifter Gasket -JLT Ram Air -MAC O/R ProChamber -SLP LM1s -IAC Restrictor Plate -Black Bumper Inserts -20% Tints -Had Visus Louvers, now they live on the highway "Having a 700whp Honda is like coming out of the closet, shocking at first, but still gay" http://i34.tinypic.com/1zfueio.jpg

01-21-2008, 09:21 PM	#17
20dsgmach03 its a V6 Join Date: Aug 2004 Location: maryland Posts: 423	Re: Look what I scored! Would you be interested in one as well? i would be down depending on how much i'd like 2 __________________ its almost fast

01-21-2008, 09:30 PM	#18
bris09 Registered User Join Date: Oct 2004 Location: Middletown, PA Posts: 3,992	Re: Look what I scored! Would you be interested in one as well? I'm interested and awaiting the details. __________________ Brian 04 Azure Mach 1 Mods: Enough to not be the slowest, but nowhere near enough to be the fastest. 17 Fusion Sport Now faster than the Mach 96 Laser Red Cobra Vert For those days you just wanna cruise with the top down 89 Shelby CSX Still rocking the VNT and Fiberides.

01-21-2008, 09:41 PM	#19
TJ4Cam Supercharger Heaven! Join Date: Sep 2003 Location: Ft Jennings, Ohio Posts: 2,335	Re: Look what I scored! Would you be interested in one as well? I am in for one in that price range too! __________________ 2003 Jack Roush Classic Stg 3 #34 of 46 Built! Zinc Yellow (the only one) Roush Serial # 7425 Built 1/13/03 1985 Canyon Red SVO- My 1st Stang, sold MCA 56545

01-21-2008, 10:22 PM	#20
No1Ford Registered User Join Date: Apr 2006 Location: MN Posts: 555	Re: Look what I scored! Would you be interested in one as well? I'll take one to! Let us know thanks. __________________

01-21-2008, 10:34 PM	#22
SnowDeath Registered User Join Date: Sep 2003 Location: Lacombe, LA Posts: 521	Re: Look what I scored! Would you be interested in one as well? I'm in for a poster as well! Let me know if the deal goes through! __________________ MODS MRT Intake Hooker LTs Borla Stingers PP Lower Intake / PHP Spacer Accufab TB MM K-Member Kit Steeda 3pt STB RWTD Dyno Tune RIP J.A.S.

01-21-2008, 10:44 PM	#23
32VALVR Registered Mach Abuser Join Date: Apr 2006 Location: SoCal Posts: 1,695	Re: Look what I scored! Would you be interested in one as well? I'm interested. __________________ 04 O/W 5sp with Kenne Bell 2.1 intercooled kit@ 10lbs.

01-21-2008, 11:16 PM	#24
mach1 obsessed Registered User Join Date: Dec 2003 Location: st.louis, mo. Posts: 114	Re: Look what I scored! Would you be interested in one as well? Count me in!

01-22-2008, 01:38 AM	#25
muzman Mach 1 enthusiast Join Date: Mar 2004 Location: Auckland New Zealand Posts: 1,540	Re: Look what I scored! Would you be interested in one as well? Would love one, don't care what postage costs to NZ, let me know if its a go. __________________ muzman,Red 03 Mach1,5 speed IUP,Born: 14 May 2003, K&N Drop In Air filter, Mach1Canuck Special IAC restrictor plate, Black Bumper mustang letters, MRT H Pipe and magnaflow cat back, MRT Chrome exhaust extensions,Mach 1 Floor Matts, bought new 2003 first registered for road use in 2010. ___________________ 1969 351w 4v Mach 1, Red, 4 speed toploader SOLD Feb 2007 2000GT Red , Auto Right Hand Drive sold 2004.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)