2003-04 Mach 1 Registry Owners Club  

Best Mustang Parts

Go Back   2003-04 Mach 1 Registry Owners Club > Buying & Selling > 2003-04 Mach 1 - For Sale/Wanted

2003-04 Mach 1 - For Sale/Wanted Post ONLY 03-04 Mach 1s For sale or wanted. Please Put Year, Color & Location in title!

Reply
 
Thread Tools Display Modes
Old 04-11-2008, 11:39 AM   #1
jeff33702
Registered User
 
Join Date: Feb 2007
Location: St. Petersburg, FL
Posts: 959
Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

(5/1/09) Price drop $26,500
PRICE DROP - $26,500 with the wheels or $24,500 if you provide your own. Now has 9900 miles.

www.tampaftp.com/jeff/machsounds.wmv

Notice the parts selection here - all the nicest stuff.

Torch Red 03 Mach 1 $31k
9600 miles

Engine
Built Teksid shortblock
Cobra Crank
CP 17cc Pistons
ARP Head and Main Studs
Canton AL road race pan, Canton windage tray
Comp Springs and Retainers
Ford GT cams
140AX 2.3 Whipple
Metco 6# lower
Billetflow 4-piece idler kit
Powder-coating on valve covers, timing covers and front acc.
Accufab TB
JLT Big Boost CAI
LFP Heat Exchanger
Maximum Motorsports oil-filter relocation kit

Fuel/Tuning
SCT BA2400
60lb Injectors
Cobra Tank
Cobra Pickup with Ford GT pumps
Dual FPDM harness
Livewire SCT tuner
Innovate LC1 wideband
3-bar MAP (both wideband and MAP connected and working through Livewire - can datalog both)

Exhaust
American Racing Longtube Step-Headers 3" Merge Collectors
Custom 3" X-pipe w/V-Band clamps at collectors
SLP LM1 Stainless Cat-Back

Drivetrain
2000 Cobra-R Spec T-56
26-spline Input Shaft
Ram HDT clutch
Dynotech Aluminum Driveshaft

Suspension
Maximum Motorsports K-member
Maximum Motorsports Control arms
Maximum Motorsports Coil-overs
Maximum Motorsports Caster-Camber plates
Maximum Motorsports Swaybar relocation kit
Bilstein Struts and shocks
Steeda sway-bar
Steeda rear adj. alum lowers
Steeda double-adjustable uppers

Wheels/Tires
18inch Forgeline GT3 wheels (18x10.5, 18x9)
New pzero rosso tires (315/30/18 - 265/35/18) - Wheels/tires over $4k alone.



Basically, it has everything that even a Cobra could aspire to have. I installed the cobra accessory/supercharger drive parts as well - so this is exactly like a modded Cobra under the hood. All supporting mods EXCEPT the only thing I haven't done is change the rear axles - and I would suggest it for sticky tires...which are required to even think about getting it to hook in anything lower than 4th gear.

Pics:
http://tampaftp.com/jeff/machpics%20001.jpg
http://tampaftp.com/jeff/enginerun%20036.jpg
^^ Shaker is now installed
http://tampaftp.com/jeff/machpics%20005.jpg

Here's one that someone else took at a local car show:
http://i134.photobucket.com/albums/q...g?t=1206493246

There are also a few more pics of the same event from different angles:
http://s134.photobucket.com/albums/q...xa/QSL%20Meet/


Strangly enough, I cant find any engine shots that I took once it was finished. They might be on the wifes laptop still. There are a few pictures in the following thread of the engine in the K-member, before install and of the engine a few minutes after it was installed It looks perfectly at home now
http://mach1registry.org/forums/showthread.php?t=70334

More Pics:

http://tampaftp.com/jeff/IMG_2053m.jpg
http://tampaftp.com/jeff/IMG_2064.JPG
http://tampaftp.com/jeff/IMG_2043.JPG
__________________
www.bestmustangparts.com for the BEST parts for your Mustang!
727-386-8088
Ask for prices on:
Maximum Motorsports
Steeda
Forgeline Wheels
JLT Intakes
BMR Suspension

SOLD
03 Mach 1 - 17lbs of Whipple
01 Cobra - 99% stock (Catback only)
68 Coupe - My first car ever
93 Coupe - www.93coupe.com

Last edited by jeff33702; 05-22-2009 at 08:40 AM.
jeff33702 is offline   Reply With Quote
Old 04-14-2008, 06:39 PM   #2
Unrealford
Mustang owner since 1984
 
Unrealford's Avatar
 
Join Date: Sep 2003
Location: Buffalo, NY
Posts: 4,515
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Id love to have a Mach1 with a Whipple
__________________
2012 Kona Blue Metallic BOSS
MOMS Racing...
11.92@115.43 stock besides drag radials
http://www.dragzine.com/news/moms-ra...2013-schedule/
Unrealford is offline   Reply With Quote
Old 04-14-2008, 08:04 PM   #3
MCHNROL
original owner
 
MCHNROL's Avatar
 
Join Date: Mar 2004
Location: Lou-a-vull, KY
Posts: 1,556
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

WOW!!! I wish!
__________________
Built 5/23 Bought 10/9/03 AFS:17x9&10.5rims, MRT:PRO-M MAF, Street Smart CAI, MagnaFlowH&catbackw/Mach tips, Hood struts, FRPP:REM 4.10 w/31-sp Mosers, Alum flywheel&driveshaft, PHP:spacer, Steeda:Tri-ax, UCA,strut towerbrace, HPM:Megabitejr.LCA,subframes, T/A:Girdle, Raptor:shiftlite, SLP:linelock, UPR:Quad&Adj NGK TR55IX CDC:floormats, honeycombtail&sequentials, gaugerings, Grippermat, ShakrAirDiverter, Bullittfueldoor, SilverStripes, BuildIDplates, Tint@35%, cats 298rwhp/318tq FUN!
MCHNROL is offline   Reply With Quote
Old 04-14-2008, 08:24 PM   #4
bullitt784
Registered User
 
bullitt784's Avatar
 
Join Date: Apr 2007
Location: miami, fl
Posts: 732
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Quote:
Originally Posted by Unrealford View Post
Id love to have a Mach1 with a Whipple
__________________
H&R, SLP, MGW, MSD, Kooks, MM, SOS, Steeda, FRPP, Moser, MT, NX
bullitt784 is offline   Reply With Quote
Old 04-14-2008, 09:28 PM   #5
jeff33702
Registered User
 
Join Date: Feb 2007
Location: St. Petersburg, FL
Posts: 959
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Took the car to the track this weekend for the first time. I had some older drag radials and only did a quick burn-out, so the traction wasn't the best - which is what I wanted because one of the only things I haven't done on the car is the axles

Anyway, granny-shifting, 2.0 60', 7.80 in the 1/8th, spinning for the first 330'. When it hooked, it was very strong - 11.80 and trapped 131. If I do the axles and put a "real" sticky tire on there, 10s should not be a problem.

Bullitt - it's calling your name!
__________________
www.bestmustangparts.com for the BEST parts for your Mustang!
727-386-8088
Ask for prices on:
Maximum Motorsports
Steeda
Forgeline Wheels
JLT Intakes
BMR Suspension

SOLD
03 Mach 1 - 17lbs of Whipple
01 Cobra - 99% stock (Catback only)
68 Coupe - My first car ever
93 Coupe - www.93coupe.com
jeff33702 is offline   Reply With Quote
Old 04-14-2008, 09:57 PM   #6
blown03Mach1
8LB YNER
 
blown03Mach1's Avatar
 
Join Date: Mar 2005
Location: Tampa
Posts: 5,653
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Tell them on how you got kicked off the track because you were too fast. LOL

But in all seriousness, this car is one SWEEET RIDE that deserves a new home here in the reg!

Jeff, G/L with the sale.
__________________
Just because you're winnin'
Don't mean you're the lucky ones


TR 2003 (Jezebel) sold Mar 12...
blown03Mach1 is offline   Reply With Quote
Old 04-14-2008, 11:03 PM   #7
bullitt784
Registered User
 
bullitt784's Avatar
 
Join Date: Apr 2007
Location: miami, fl
Posts: 732
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

words can't express how badly i want this car. unfortunately, i have the huge task of trying to sell my car, which is probably going to take a looooooong time


btw, the only reason i'm selling my car is for your car. yea, it's a sickness. good luck with the sale anyways
__________________
H&R, SLP, MGW, MSD, Kooks, MM, SOS, Steeda, FRPP, Moser, MT, NX
bullitt784 is offline   Reply With Quote
Old 04-15-2008, 12:51 AM   #8
jeff33702
Registered User
 
Join Date: Feb 2007
Location: St. Petersburg, FL
Posts: 959
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

It will probably end up yours man. I'm buying a new Mazdaspeed3 tomorrow for a daily-driver. I was planning on taking the Mach to the SVTOA Sebring event next month, so if it doesn't sell by then, I'll list it on Performance Autosport. I think that's the best chance for a sale really - so you have over a month still before that happens

If you end up buying it before Sebring, I'll just take the Mazda

Yes, first they said that I needed a helmet - then they noticed the trap speed and started getting picky, so I was done for the day

BTW, here's a quick vid that we did on the way back from the track. The color is horrible because we had the camera messed up. Ill send you the better version in email.
http://www.youtube.com/watch?v=Ea0Qey2D4Fg
__________________
www.bestmustangparts.com for the BEST parts for your Mustang!
727-386-8088
Ask for prices on:
Maximum Motorsports
Steeda
Forgeline Wheels
JLT Intakes
BMR Suspension

SOLD
03 Mach 1 - 17lbs of Whipple
01 Cobra - 99% stock (Catback only)
68 Coupe - My first car ever
93 Coupe - www.93coupe.com
jeff33702 is offline   Reply With Quote
Old 04-15-2008, 12:30 PM   #9
bullitt784
Registered User
 
bullitt784's Avatar
 
Join Date: Apr 2007
Location: miami, fl
Posts: 732
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Quote:
Originally Posted by jeff33702 View Post
It will probably end up yours man. I'm buying a new Mazdaspeed3 tomorrow for a daily-driver. I was planning on taking the Mach to the SVTOA Sebring event next month, so if it doesn't sell by then, I'll list it on Performance Autosport. I think that's the best chance for a sale really - so you have over a month still before that happens

If you end up buying it before Sebring, I'll just take the Mazda

Yes, first they said that I needed a helmet - then they noticed the trap speed and started getting picky, so I was done for the day

BTW, here's a quick vid that we did on the way back from the track. The color is horrible because we had the camera messed up. Ill send you the better version in email.
http://www.youtube.com/watch?v=Ea0Qey2D4Fg

we'll see. i like the fact that it's pretty much untouched after you built the motor. if i don't sell within a few weeks i'm going to forget about selling my mach and just sell a bunch of parts and get a hellion kit on the stock bottom end and cross my fingers for a few years.
__________________
H&R, SLP, MGW, MSD, Kooks, MM, SOS, Steeda, FRPP, Moser, MT, NX
bullitt784 is offline   Reply With Quote
Old 04-15-2008, 02:47 PM   #10
jeff33702
Registered User
 
Join Date: Feb 2007
Location: St. Petersburg, FL
Posts: 959
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Quote:
Originally Posted by bullitt784 View Post
we'll see. i like the fact that it's pretty much untouched after you built the motor. if i don't sell within a few weeks i'm going to forget about selling my mach and just sell a bunch of parts and get a hellion kit on the stock bottom end and cross my fingers for a few years.
If you decide that you are going to be able to buy it shortly after Sebring, just shoot me a deposit - I'll detail it and leave it at home

Turbo is a great way to go. The only thing that I don't like about the Hellion kit is - even if you opt for the better Maximum Motorsports K-setup, you are still running the plumbing under the K-member. If you are running a drag setup, then you will have plenty of clearance but if you want a lowered car, watch out for the speed bumps.
__________________
www.bestmustangparts.com for the BEST parts for your Mustang!
727-386-8088
Ask for prices on:
Maximum Motorsports
Steeda
Forgeline Wheels
JLT Intakes
BMR Suspension

SOLD
03 Mach 1 - 17lbs of Whipple
01 Cobra - 99% stock (Catback only)
68 Coupe - My first car ever
93 Coupe - www.93coupe.com
jeff33702 is offline   Reply With Quote
Old 04-15-2008, 03:51 PM   #11
DTMach1
semi-pro moderator
 
DTMach1's Avatar
 
Join Date: May 2004
Location: Virginia Beach
Posts: 4,955
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Great looking car and very well done, GL on the Sale!!!
__________________

2004 Mach 1
IUP/5spd/DSG
Engine, etc done...sits in the garage
DTMach1 is offline   Reply With Quote
Old 04-17-2008, 04:21 PM   #12
bullitt784
Registered User
 
bullitt784's Avatar
 
Join Date: Apr 2007
Location: miami, fl
Posts: 732
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Quote:
Originally Posted by jeff33702 View Post
Thanks man - I love her but I want to get started on my 68.

TTT
i want to help you on your way jeff! only problem is i just got a $16k offer for my car as it stands. should i take it???
__________________
H&R, SLP, MGW, MSD, Kooks, MM, SOS, Steeda, FRPP, Moser, MT, NX
bullitt784 is offline   Reply With Quote
Old 04-17-2008, 07:27 PM   #13
jeff33702
Registered User
 
Join Date: Feb 2007
Location: St. Petersburg, FL
Posts: 959
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Thats up to you, but it's a little low-ball, considering the wheels and stuff. I wouldn't sell it they way it is for less than 19-20. If you REALLY want to move it - 18, but 16? Little low.
I think 18 would be a STEAL for someone.
__________________
www.bestmustangparts.com for the BEST parts for your Mustang!
727-386-8088
Ask for prices on:
Maximum Motorsports
Steeda
Forgeline Wheels
JLT Intakes
BMR Suspension

SOLD
03 Mach 1 - 17lbs of Whipple
01 Cobra - 99% stock (Catback only)
68 Coupe - My first car ever
93 Coupe - www.93coupe.com
jeff33702 is offline   Reply With Quote
Old 04-17-2008, 07:41 PM   #14
jeff33702
Registered User
 
Join Date: Feb 2007
Location: St. Petersburg, FL
Posts: 959
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Of course, I bought a new car 2 days ago, or I would seriously take it on trade at the $16k mark - but I wouldn't pretend like I wasn't getting the best end of that deal - $16k would be really cheap.
__________________
www.bestmustangparts.com for the BEST parts for your Mustang!
727-386-8088
Ask for prices on:
Maximum Motorsports
Steeda
Forgeline Wheels
JLT Intakes
BMR Suspension

SOLD
03 Mach 1 - 17lbs of Whipple
01 Cobra - 99% stock (Catback only)
68 Coupe - My first car ever
93 Coupe - www.93coupe.com
jeff33702 is offline   Reply With Quote
Old 04-17-2008, 07:47 PM   #15
bullitt784
Registered User
 
bullitt784's Avatar
 
Join Date: Apr 2007
Location: miami, fl
Posts: 732
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

yea, i was being facetious. i wouldn't take anything less than $21k for my car without the wheels. i really wish i was in a better position to buy your car, but that's the way it always goes. oh well, at least i'll always bump your thread because your car is the total package. someone's going to be really happy
__________________
H&R, SLP, MGW, MSD, Kooks, MM, SOS, Steeda, FRPP, Moser, MT, NX
bullitt784 is offline   Reply With Quote
Old 04-17-2008, 10:15 PM   #16
jeff33702
Registered User
 
Join Date: Feb 2007
Location: St. Petersburg, FL
Posts: 959
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Whew - I thought you were considering it! As a car guy, I couldn't tell you, with a clear conscience, to take that kind of offer! haha.

There is a local guy interested but he's in the same boat as you - needs to sell his current car first.

It looks like it's not going to Sebring after-all. I told my wife that I was 100% going to sell it, so it wouldn't make sense to take a chance that something might happen to it at Sebring. I'm going to bring the new car (Mazdaspeed3).

Jeff
__________________
www.bestmustangparts.com for the BEST parts for your Mustang!
727-386-8088
Ask for prices on:
Maximum Motorsports
Steeda
Forgeline Wheels
JLT Intakes
BMR Suspension

SOLD
03 Mach 1 - 17lbs of Whipple
01 Cobra - 99% stock (Catback only)
68 Coupe - My first car ever
93 Coupe - www.93coupe.com
jeff33702 is offline   Reply With Quote
Old 04-22-2008, 11:03 AM   #17
jeff33702
Registered User
 
Join Date: Feb 2007
Location: St. Petersburg, FL
Posts: 959
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

I saw that it was for sale. It's amazing how much work and money we put into these, just to sell them What's next for you? I'm starting my 68 coupe, pro-touring project.
__________________
www.bestmustangparts.com for the BEST parts for your Mustang!
727-386-8088
Ask for prices on:
Maximum Motorsports
Steeda
Forgeline Wheels
JLT Intakes
BMR Suspension

SOLD
03 Mach 1 - 17lbs of Whipple
01 Cobra - 99% stock (Catback only)
68 Coupe - My first car ever
93 Coupe - www.93coupe.com
jeff33702 is offline   Reply With Quote
Old 04-22-2008, 12:18 PM   #18
cmylxgo
Blower Guru
 
cmylxgo's Avatar
 
Join Date: Dec 2002
Location: Motor City
Posts: 2,224
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Quote:
Originally Posted by jeff33702 View Post
I saw that it was for sale. It's amazing how much work and money we put into these, just to sell them What's next for you? I'm starting my 68 coupe, pro-touring project.
Either a GT500, ZX-14, or a new house.
__________________
YouTube Videos: http://www.youtube.com/slugbitchracing

2003 Mustang Mach 1 AutoMatic (Torch Red)
Born On Date: 2.28.03
Vin: 396895

Adoption Date: 9.07.09


Best ET: 9.54
Best MPH: 149.99
Best 60FT: 1.32

All done on 17" Radials
cmylxgo is offline   Reply With Quote
Old 04-22-2008, 02:06 PM   #19
nasty04mach1
FOR SALE!!!
 
nasty04mach1's Avatar
 
Join Date: Jan 2008
Location: Middle, GA
Posts: 1,163
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Dang that is a SWEET Mach! I hope one day I can have one like that...
__________________
'04 Mach gone but will be never forgotten *12/03/08*
nasty04mach1 is offline   Reply With Quote
Old 04-22-2008, 02:40 PM   #20
Styles
Big Bad Z =p
 
Styles's Avatar
 
Join Date: Nov 2006
Location: South West FLA. (CC, FTM, NOPO, PC)
Posts: 201
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Willing to do a local trade for a t-88 notch? Vehical was listed in other ford section this morning
__________________
1998 Camaro Z-28 M/6: TH400, RMVB, 4800 vig stall, LS6 intake, Hooker LT's, Full suspension (11 second stock block)

1999 Camaro: 9.72 1/4 (H/C/I/n2o) SOLD

2004 Oxford White Mach: Procharged & blown-up


Future: T-rex v.2 cam (243/249 .613/.618 110+2), 6-speed swap, Patriot .650 spring kit, ported LS6 oil pump, double roller timing chain, svo 30# injectors *awaiting install* (10 Second cam-only)

8sec 90' turbo Notch F/S: http://mach1registry.org/forums/showthread.php?t=79174
Styles is offline   Reply With Quote
Old 04-22-2008, 02:46 PM   #21
jeff33702
Registered User
 
Join Date: Feb 2007
Location: St. Petersburg, FL
Posts: 959
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Styles - were you at BMP a couple weekends ago?

I'm not in the position to trade unless the deal is really slanted in my direction Although, that is a bad car man.
__________________
www.bestmustangparts.com for the BEST parts for your Mustang!
727-386-8088
Ask for prices on:
Maximum Motorsports
Steeda
Forgeline Wheels
JLT Intakes
BMR Suspension

SOLD
03 Mach 1 - 17lbs of Whipple
01 Cobra - 99% stock (Catback only)
68 Coupe - My first car ever
93 Coupe - www.93coupe.com
jeff33702 is offline   Reply With Quote
Old 04-22-2008, 02:47 PM   #22
bullitt784
Registered User
 
bullitt784's Avatar
 
Join Date: Apr 2007
Location: miami, fl
Posts: 732
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

http://i135.photobucket.com/albums/q...boCoupe011.jpg
__________________
H&R, SLP, MGW, MSD, Kooks, MM, SOS, Steeda, FRPP, Moser, MT, NX
bullitt784 is offline   Reply With Quote
Old 04-22-2008, 03:01 PM   #23
Styles
Big Bad Z =p
 
Styles's Avatar
 
Join Date: Nov 2006
Location: South West FLA. (CC, FTM, NOPO, PC)
Posts: 201
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Quote:
Originally Posted by jeff33702 View Post
Styles - were you at BMP a couple weekends ago?

I'm not in the position to trade unless the deal is really slanted in my direction Although, that is a bad car man.

I am sure something could be worked out, the car is priced to sell quickly. There is more then double that invested into the car and awhole lot of man hours. Your car is very-very nice though, GL on the sale and if you do change your mind just hit me up.
__________________
1998 Camaro Z-28 M/6: TH400, RMVB, 4800 vig stall, LS6 intake, Hooker LT's, Full suspension (11 second stock block)

1999 Camaro: 9.72 1/4 (H/C/I/n2o) SOLD

2004 Oxford White Mach: Procharged & blown-up


Future: T-rex v.2 cam (243/249 .613/.618 110+2), 6-speed swap, Patriot .650 spring kit, ported LS6 oil pump, double roller timing chain, svo 30# injectors *awaiting install* (10 Second cam-only)

8sec 90' turbo Notch F/S: http://mach1registry.org/forums/showthread.php?t=79174
Styles is offline   Reply With Quote
Old 04-22-2008, 03:09 PM   #24
jeff33702
Registered User
 
Join Date: Feb 2007
Location: St. Petersburg, FL
Posts: 959
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

There are other factors too. I have another car that I would like to get work started on AND I just purchased a new DD.
__________________
www.bestmustangparts.com for the BEST parts for your Mustang!
727-386-8088
Ask for prices on:
Maximum Motorsports
Steeda
Forgeline Wheels
JLT Intakes
BMR Suspension

SOLD
03 Mach 1 - 17lbs of Whipple
01 Cobra - 99% stock (Catback only)
68 Coupe - My first car ever
93 Coupe - www.93coupe.com
jeff33702 is offline   Reply With Quote
Old 04-22-2008, 03:13 PM   #25
jeff33702
Registered User
 
Join Date: Feb 2007
Location: St. Petersburg, FL
Posts: 959
Re: Fully built 2003 Mach 1 - Whipple - T56 - MM - Forgeline - 8600 miles

Oh, and lastly - I just watched one of your vids. I'd kill myself in that car, for sure!
__________________
www.bestmustangparts.com for the BEST parts for your Mustang!
727-386-8088
Ask for prices on:
Maximum Motorsports
Steeda
Forgeline Wheels
JLT Intakes
BMR Suspension

SOLD
03 Mach 1 - 17lbs of Whipple
01 Cobra - 99% stock (Catback only)
68 Coupe - My first car ever
93 Coupe - www.93coupe.com
jeff33702 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:49 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<