|
06-24-2009, 03:43 PM | #1 |
Crewchief
Join Date: May 2007
Location: Ft. Lewis, Wa
Posts: 546
|
XACT flywheel
anybody here use one? its pretty light, 14.3 lbs. is that too light for a DD?
what kind of difference would it make to my acceleration? i dont drag race, but i do alot of autoX. good? bad? go with something else?
__________________
I'm the guy who does his job. You must be the other guy... 15T Blackhawk Mechanic Extraordinaire BBK 65mm TB SCT x3 Kooks LT, o/r X Mac Catback PSR K w/ D Spec coilovers 2000 Cobra R brakes 275/40/17 F1GSD3 315/35/17 F1GSD3 FR500 wheels 17x9, 17x10.5 Amsoil engine and tranny 4.10 gears ACT 14.3 lb flywheel SPEC clutch FRPP driveshaft C&L full intake w/85mm maf MGW shifter NGK TR55ix 319HP 333TQ at the wheels H&K USP compact .40S&W |
06-25-2009, 06:33 PM | #2 |
Crewchief
Join Date: May 2007
Location: Ft. Lewis, Wa
Posts: 546
|
Re: XACT flywheel
bueller?...
__________________
I'm the guy who does his job. You must be the other guy... 15T Blackhawk Mechanic Extraordinaire BBK 65mm TB SCT x3 Kooks LT, o/r X Mac Catback PSR K w/ D Spec coilovers 2000 Cobra R brakes 275/40/17 F1GSD3 315/35/17 F1GSD3 FR500 wheels 17x9, 17x10.5 Amsoil engine and tranny 4.10 gears ACT 14.3 lb flywheel SPEC clutch FRPP driveshaft C&L full intake w/85mm maf MGW shifter NGK TR55ix 319HP 333TQ at the wheels H&K USP compact .40S&W |
06-25-2009, 07:33 PM | #3 |
Crewchief
Join Date: May 2007
Location: Ft. Lewis, Wa
Posts: 546
|
Re: XACT flywheel
can anyone recommend a light weight flywheel? or a minimum wieght? anything?
__________________
I'm the guy who does his job. You must be the other guy... 15T Blackhawk Mechanic Extraordinaire BBK 65mm TB SCT x3 Kooks LT, o/r X Mac Catback PSR K w/ D Spec coilovers 2000 Cobra R brakes 275/40/17 F1GSD3 315/35/17 F1GSD3 FR500 wheels 17x9, 17x10.5 Amsoil engine and tranny 4.10 gears ACT 14.3 lb flywheel SPEC clutch FRPP driveshaft C&L full intake w/85mm maf MGW shifter NGK TR55ix 319HP 333TQ at the wheels H&K USP compact .40S&W |
06-25-2009, 09:58 PM | #4 |
Pilot
Join Date: Mar 2009
Location: West Grove, Pa
Posts: 653
|
Re: XACT flywheel
a lot of guys are using the spec stuff and findanza...
dont forget that u get what u pay for... flywheels are mucho important and a PITA if u have issues with a fairly new one id stick to whats used by most |
06-25-2009, 10:22 PM | #5 |
Crewchief
Join Date: May 2007
Location: Ft. Lewis, Wa
Posts: 546
|
Re: XACT flywheel
is 14.3 lbs too light? what does a spec aluminum FW weigh?
__________________
I'm the guy who does his job. You must be the other guy... 15T Blackhawk Mechanic Extraordinaire BBK 65mm TB SCT x3 Kooks LT, o/r X Mac Catback PSR K w/ D Spec coilovers 2000 Cobra R brakes 275/40/17 F1GSD3 315/35/17 F1GSD3 FR500 wheels 17x9, 17x10.5 Amsoil engine and tranny 4.10 gears ACT 14.3 lb flywheel SPEC clutch FRPP driveshaft C&L full intake w/85mm maf MGW shifter NGK TR55ix 319HP 333TQ at the wheels H&K USP compact .40S&W |
06-26-2009, 12:23 AM | #6 |
'10 TLAC FS Champion
Join Date: Jul 2004
Location: Bossier City, La
Posts: 439
|
Re: XACT flywheel
__________________
RAT 65-FS Red River Region - SCCA 2004 Torch Red Mach 1 5 speed IUP K & N Air Filter Denso IT16 MM 1/4" wheel spacers Kumho XS Mach 1 Floor Mats Hawk HPS Brake Pads Tokico D-Spec Struts/Shocks Steeda 35 MM Anti-Sway Bar |
06-26-2009, 12:39 AM | #7 |
Crewchief
Join Date: May 2007
Location: Ft. Lewis, Wa
Posts: 546
|
Re: XACT flywheel
sweet, thanks for to link. my searching only turned up that people used them... no results
__________________
I'm the guy who does his job. You must be the other guy... 15T Blackhawk Mechanic Extraordinaire BBK 65mm TB SCT x3 Kooks LT, o/r X Mac Catback PSR K w/ D Spec coilovers 2000 Cobra R brakes 275/40/17 F1GSD3 315/35/17 F1GSD3 FR500 wheels 17x9, 17x10.5 Amsoil engine and tranny 4.10 gears ACT 14.3 lb flywheel SPEC clutch FRPP driveshaft C&L full intake w/85mm maf MGW shifter NGK TR55ix 319HP 333TQ at the wheels H&K USP compact .40S&W |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|