My New Auto Shifter - 2003-04 Mach 1 Registry Owners Club

MRod04 · 03-08-2008, 05:01 PM

Check it out! What do you guys think?

warpony · 03-08-2008, 06:20 PM

Quote:

Originally Posted by MRod04

Check it out! What do you guys think?

IT LOOKS GOOD BABY!

MRod04 · 03-08-2008, 07:36 PM

Thanx Luv!

3150Mach1 · 03-08-2008, 08:08 PM

Looks great. What did you do about the OD button?

MRod04 · 03-08-2008, 08:44 PM

The O/D button is inside the boot

3150Mach1 · 03-08-2008, 09:00 PM

Quote:

Originally Posted by MRod04

The O/D button is inside the boot

Cool. I got a switch for my coin slot and wired it for my OD. The nice thing is the switch I got defaults the OD off everytime I start the car. No need to remember at the drag strip and I usually drive around town with it off anyway.

MRod04 · 03-08-2008, 09:15 PM

I think I've seen yours before. There's where I got the idea of adding a boot. Thanx! Well, I really don't use the O/D button.

3150Mach1 · 03-08-2008, 09:32 PM

Are you signed up for the Blueridge Parkway Cruise in May?

Also Try and make MIR on 3/29 for some racing fun.

MRod04 · 03-08-2008, 09:41 PM

No, won't be able to make it. Thanks for the invite.

MRod04 · 03-30-2008, 08:56 PM

I found a better shift knob and decided to replace it with this one. Check it Out!

Lonestar7 · 03-30-2008, 09:03 PM

Looks cool!

LS

BeachMach1 · 03-30-2008, 10:35 PM

That looks really cool ... where did you get it?

frisko4one5 · 03-31-2008, 12:56 AM

Quote:

Originally Posted by MRod04

I found a better shift knob and decided to replace it with this one. Check it Out!

holy crap!!! that is some sick stuff man i love u...where did u get it i want one and where did u get the boot? how do u shift in gear with it? is there a button like the regular ones and where did u put the over drive button? and how did u put it somewhere else? did u need to rewire anything? man that thing is bad azz i need to get one!! if u have pixs of ur od button i would love to see. is this hard to install and configure?

frisko4one5 · 03-31-2008, 01:13 AM

nm i found it by searching on yahoo..its UPR's new shift knob for autos. they are actually having a special right now the shift knob and the OD relocation button for 60+ shipping the ball itself is 55 bucks i just ordered one...thx for the tip and pixs man 2 min after seeing this i bought it..ive been waiting for a company to make something like this for the autos...

hopefully i can install the OD button ive never taken apart my shifter..ill ask for help if needed =0 am i going to need to snip wiries and take apart my center console or anything like that?

where did u get ur shift boot and to put that in did u have to take the center console out?

MRod04 · 03-31-2008, 06:16 PM

Wow! You got a lot of questions. I'll try to answer them as best as I can.
You can put the O/D button underneath the shift boot. I personally decided to remove it completely. You can get the shift boot on ebay. It is the stock one for the 5speed Mustang. You will only need to remove the shift bezel to install everything.

MRod04 · 03-31-2008, 06:18 PM

you can get the shift knob at http://www.mustangsunlimited.com/

frisko4one5 · 03-31-2008, 09:24 PM

how hard is it to install the OD relocation button? do i have to splice wires or take my center console out? i got mine from UPR's website..they are running a special....both the shifter and the OD relocation button for 59.99+ shipping. it came out to 70 bucks...i thought it was a great deal because they sell the shifter alone for 55 bucks and the button they sell for 25 bucks..so if anybody wants this set get it now while its cheap

MRod04 · 04-01-2008, 05:20 PM

It is really easy to install the O/D button. Make sure when you take it off the old one that the wires don't touch. You do not need to remove the center console. The only thing you remove is the shift bezel.

04Torchred · 04-07-2008, 07:10 PM

Got my Shift knob today!

3150Mach1 · 04-07-2008, 08:05 PM

Quote:

Originally Posted by 04Torchred

Got my Shift knob today!

Wow, thats looks awsome. I love my Mach1 T-handle but like the looks of that way better.

Here is mine. The boot matches the ebrake boot. May get both in carbon fiber look later.

http://mach1registry.org/forums/show...5&postcount=11

If anyone is thinking of doing this I have a spare OD button relocation swicth I can sell you for $20 shipped.
I have some odd ball parts laying around that someone might need.

AzureMach1auto · 05-05-2008, 07:54 AM

D*** you guys posting this. Now I gotta do this. I was going to say that without the shift pattern Virginia won't pass it on inspection. But since you added the other ball w/pattern your good. Va is crazy on inspections.

04Torchred · 05-05-2008, 09:35 AM

Quote:

Originally Posted by AzureMach1auto

D*** you guys posting this. Now I gotta do this. I was going to say that without the shift pattern Virginia won't pass it on inspection. But since you added the other ball w/pattern your good. Va is crazy on inspections.

Tell me about it...and I'm tired of haveing to pay a tax on my cars every year too! This state sucks! I can't wait to move!

fiveliter · 05-05-2008, 09:44 AM

Quote:

Originally Posted by AzureMach1auto

D*** you guys posting this. Now I gotta do this. I was going to say that without the shift pattern Virginia won't pass it on inspection. But since you added the other ball w/pattern your good. Va is crazy on inspections.

VA requires a shift pattern on an automatic shifter? That's crazy.

04Torchred · 05-05-2008, 09:54 AM

Quote:

Originally Posted by fiveliter

VA requires a shift pattern on an automatic shifter? That's crazy.

They require a shift pattern to be seen either on the shift knob, or shift console, or the instrument cluster. We don't have one in the cluster, and I covered the console up w/ a boot, so...the knob has to show it.

MRod04 · 05-26-2008, 01:26 PM

Well, my Mach is not registered in VA so even if I didn't have the shift pattern I would be good.

03-08-2008, 05:01 PM	#1
MRod04 MachGirl Join Date: Apr 2007 Location: Oceanside, Ca Posts: 327	My New Auto Shifter Check it out! What do you guys think? Attached Thumbnails

03-08-2008, 07:36 PM	#3
MRod04 MachGirl Join Date: Apr 2007 Location: Oceanside, Ca Posts: 327	Re: My New Auto Shifter Thanx Luv!

03-08-2008, 08:08 PM	#4
3150Mach1 Love my Mach Join Date: Apr 2005 Location: Charlottesville, VA Posts: 13,678	Re: My New Auto Shifter Looks great. What did you do about the OD button? __________________ 2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt Last edited by 3150Mach1; 09-13-2011 at 09:28 PM.

03-08-2008, 08:44 PM	#5
MRod04 MachGirl Join Date: Apr 2007 Location: Oceanside, Ca Posts: 327	Re: My New Auto Shifter The O/D button is inside the boot

03-08-2008, 09:15 PM	#7
MRod04 MachGirl Join Date: Apr 2007 Location: Oceanside, Ca Posts: 327	Re: My New Auto Shifter I think I've seen yours before. There's where I got the idea of adding a boot. Thanx! Well, I really don't use the O/D button.

03-08-2008, 09:32 PM	#8
3150Mach1 Love my Mach Join Date: Apr 2005 Location: Charlottesville, VA Posts: 13,678	Re: My New Auto Shifter Are you signed up for the Blueridge Parkway Cruise in May? Also Try and make MIR on 3/29 for some racing fun. __________________ 2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt

03-08-2008, 09:41 PM	#9
MRod04 MachGirl Join Date: Apr 2007 Location: Oceanside, Ca Posts: 327	Re: My New Auto Shifter No, won't be able to make it. Thanks for the invite.

03-30-2008, 08:56 PM	#10
MRod04 MachGirl Join Date: Apr 2007 Location: Oceanside, Ca Posts: 327	Re: My New Auto Shifter I found a better shift knob and decided to replace it with this one. Check it Out! Attached Thumbnails __________________ Visus Louvers Shorty Antenna Cobra Jet Emblems Mach 1 Black Fuel Door Honeycomb Panel Mach 1 Floor Mats Leather Shift Boot Quarter Panel Louvers Black Anodized Push Button Shift Knob Stainless Steel System (SSS) Wheel Replicas Magnum 500s Supersport STEEDA Springs

03-30-2008, 09:03 PM	#11
Lonestar7 Guest Join Date: Apr 2007 Location: Denver, CO Posts: 3,152	Re: My New Auto Shifter Looks cool! LS

03-30-2008, 10:35 PM	#12
BeachMach1 Old Retired Navy Guy Join Date: Jun 2007 Location: Virginia Beach, VA Posts: 169	Re: My New Auto Shifter That looks really cool ... where did you get it? __________________ 2004 Torch Red, Auto, IUP ... My DD. Low enough to look cool ... high enough to get through the car wash. Way less mods than most you dudes!

03-31-2008, 01:13 AM	#14
frisko4one5 2K3MACH Join Date: Nov 2007 Location: San francisco california Posts: 1,707	Re: My New Auto Shifter nm i found it by searching on yahoo..its UPR's new shift knob for autos. they are actually having a special right now the shift knob and the OD relocation button for 60+ shipping the ball itself is 55 bucks i just ordered one...thx for the tip and pixs man 2 min after seeing this i bought it..ive been waiting for a company to make something like this for the autos... hopefully i can install the OD button ive never taken apart my shifter..ill ask for help if needed =0 am i going to need to snip wiries and take apart my center console or anything like that? where did u get ur shift boot and to put that in did u have to take the center console out? __________________ 03 Torch Red Auto IUP 1 of 528 MODS: PERFORMANCE: Pypes M80 muffler exhaust ,Roush Subframe Connectors, Stock h-pipe(for now), Eibach Prokit, Bilstien shocks/struts APPERANCE: Mach 1 ID PLATE,"Ram Air" Shaker Emblems, Tinted Tail Lights,18x9/10 Matt Black FR500's, UPR auto shift ball w/ OD, Stock look for now

03-31-2008, 06:16 PM	#15
MRod04 MachGirl Join Date: Apr 2007 Location: Oceanside, Ca Posts: 327	Re: My New Auto Shifter Wow! You got a lot of questions. I'll try to answer them as best as I can. You can put the O/D button underneath the shift boot. I personally decided to remove it completely. You can get the shift boot on ebay. It is the stock one for the 5speed Mustang. You will only need to remove the shift bezel to install everything. __________________ Visus Louvers Shorty Antenna Cobra Jet Emblems Mach 1 Black Fuel Door Honeycomb Panel Mach 1 Floor Mats Leather Shift Boot Quarter Panel Louvers Black Anodized Push Button Shift Knob Stainless Steel System (SSS) Wheel Replicas Magnum 500s Supersport STEEDA Springs

03-31-2008, 06:18 PM	#16
MRod04 MachGirl Join Date: Apr 2007 Location: Oceanside, Ca Posts: 327	Re: My New Auto Shifter you can get the shift knob at http://www.mustangsunlimited.com/ __________________ Visus Louvers Shorty Antenna Cobra Jet Emblems Mach 1 Black Fuel Door Honeycomb Panel Mach 1 Floor Mats Leather Shift Boot Quarter Panel Louvers Black Anodized Push Button Shift Knob Stainless Steel System (SSS) Wheel Replicas Magnum 500s Supersport STEEDA Springs

03-31-2008, 09:24 PM	#17
frisko4one5 2K3MACH Join Date: Nov 2007 Location: San francisco california Posts: 1,707	Re: My New Auto Shifter how hard is it to install the OD relocation button? do i have to splice wires or take my center console out? i got mine from UPR's website..they are running a special....both the shifter and the OD relocation button for 59.99+ shipping. it came out to 70 bucks...i thought it was a great deal because they sell the shifter alone for 55 bucks and the button they sell for 25 bucks..so if anybody wants this set get it now while its cheap __________________ 03 Torch Red Auto IUP 1 of 528 MODS: PERFORMANCE: Pypes M80 muffler exhaust ,Roush Subframe Connectors, Stock h-pipe(for now), Eibach Prokit, Bilstien shocks/struts APPERANCE: Mach 1 ID PLATE,"Ram Air" Shaker Emblems, Tinted Tail Lights,18x9/10 Matt Black FR500's, UPR auto shift ball w/ OD, Stock look for now

04-01-2008, 05:20 PM	#18
MRod04 MachGirl Join Date: Apr 2007 Location: Oceanside, Ca Posts: 327	Re: My New Auto Shifter It is really easy to install the O/D button. Make sure when you take it off the old one that the wires don't touch. You do not need to remove the center console. The only thing you remove is the shift bezel. __________________ Visus Louvers Shorty Antenna Cobra Jet Emblems Mach 1 Black Fuel Door Honeycomb Panel Mach 1 Floor Mats Leather Shift Boot Quarter Panel Louvers Black Anodized Push Button Shift Knob Stainless Steel System (SSS) Wheel Replicas Magnum 500s Supersport STEEDA Springs

04-07-2008, 07:10 PM	#19
04Torchred Pony Up! Join Date: Mar 2004 Location: Virginia Beach, VA Posts: 247	Re: My New Auto Shifter Got my Shift knob today! Attached Thumbnails __________________ 13.49 @ 102.88 (Before Mods) Mods: FRPP 4.10's SLP Loudmouth Cat Back Superchips Custom Tuning (SCT) CAI (PHP) Steeda Underdrive Pullies 3300 rpm stall converter Future Mods: PHP Intake Spacer

05-05-2008, 07:54 AM	#21
AzureMach1auto Registered User Join Date: Jan 2007 Location: Stafford, VA Posts: 802	Re: My New Auto Shifter D*** you guys posting this. Now I gotta do this. I was going to say that without the shift pattern Virginia won't pass it on inspection. But since you added the other ball w/pattern your good. Va is crazy on inspections. __________________ '03 Azure Mach 1: auto., IUP, JLT CAI. BUILD DATE:02/03/2003 Purchased: 01/02/07 '94 Mitsubishi 3000GT SL: 5-speed '87 IROC-Z: Crate 320rwhp Vortec T.P.I., many mods

05-26-2008, 01:26 PM	#25
MRod04 MachGirl Join Date: Apr 2007 Location: Oceanside, Ca Posts: 327	Re: My New Auto Shifter Well, my Mach is not registered in VA so even if I didn't have the shift pattern I would be good. __________________ Visus Louvers Shorty Antenna Cobra Jet Emblems Mach 1 Black Fuel Door Honeycomb Panel Mach 1 Floor Mats Leather Shift Boot Quarter Panel Louvers Black Anodized Push Button Shift Knob Stainless Steel System (SSS) Wheel Replicas Magnum 500s Supersport STEEDA Springs

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)