Mach 1 Fuel Door *NEW* SHIPPING -NOW IN STOCK - 2003-04 Mach 1 Registry Owners Club

03mach1 · 01-12-2006, 07:01 AM

Anyone interested in this fuel Door?
Let me know, we will get some and stock them and give member pricing! Working with the vendor and they are just getting them machined.

Getting Pricing going on it, Probably $149 or less.
I believe they will be available in 3 different styles.

- Black
- Polished
- Satin Brushed (Shown)

Okay, Final pricing is $109 + $6 S/H.

MACH 1 BLACK ONLY for this run.
Non Locking sorry.

ORDER:
http://www.mach1performance.org/exterior.htm#mach1

BLACK SATIN/BRUSHED AVAILABLE
POLISHED
BRUSHED SATIN LOOK (SHOWN BELOW)

GRB60 · 01-12-2006, 07:09 AM

I voted for black. I think it'll go best with the stripes, spoiler, etc. on my Torch Red car.

03mach1 · 01-12-2006, 07:47 AM

I will try and get more pics with the other selections, but I think the Black too! With the yellow....

H-TownMachI · 01-12-2006, 08:12 AM

Quote:

Originally Posted by 03mach1

, but I think the Black too! With the yellow....

Me two

Bill Hamilton · 01-12-2006, 08:22 AM

Sounds good Dave, I'll be down for a black one myself

. Any chance of you bringing some of the MRT "Mach 1" stuff inventory to Carlisle?

Mustanger2 · 01-12-2006, 09:23 AM

I want a black one

03mach1 · 01-12-2006, 10:36 AM

Thanks!

I will have the goodies at most shows (if I have them in stock I will bring some.)

We will have them at Carlisle, Birmingham, Erie and a few other places.

03SHKR · 01-12-2006, 12:02 PM

Assuming it wasn't glossy, I would probably buy a black one. Any chance someone could post a pic of a black one with the Mach 1 script?

Craumer360 · 01-12-2006, 12:07 PM

I want a black one!!!!

2k4mach · 01-12-2006, 12:09 PM

are these the ones that we just had a thread on that someone found on ebay?
if so i might be interested in a black one

DTMach1 · 01-12-2006, 12:18 PM

can ya mix it up a little? like black center and brushed outer ring?

IMachU · 01-12-2006, 01:02 PM

Quote:

Originally Posted by 2k4mach

are these the ones that we just had a thread on that someone found on ebay?
if so i might be interested in a black one

Yup, same ones. Maybe Dave can get better pricing for us!

Mr Scary · 01-12-2006, 01:11 PM

Quote:

Originally Posted by GRB60

I voted for black. I think it'll go best with the stripes, spoiler, etc. on my Torch Red car.

:THUMBSUP:

OSUALUM78 · 01-12-2006, 04:43 PM

I'd go with black or satin look on my UA. Are they lockable? That would be sweet if they locked too.

03mach1 · 01-12-2006, 06:12 PM

Working on getting more pics, they are getting machined right now. It might be the same one on eBay.?? I thought they looked familiar. Working directly with the vendor. They are a brushed satin black very similiar to these...

This is the best I can do for now. These are for the 05-06, but you get the idea.

Thanks!

SHOWN ARE GT for 2005-06, but it give you and idea of the color choices

03mach1 · 01-12-2006, 06:21 PM

Do you guys like the brushed black look? If so, I will order them and get them available for the first batch.

Karma_Energy · 01-12-2006, 06:23 PM

1 black 1 for me!

DTMach1 · 01-12-2006, 06:52 PM

Quote:

Originally Posted by 03mach1

Do you guys like the brushed black look? If so, I will order them and get them available for the first batch.

brushed black def. cool! :THUMBSUP:

2k4mach · 01-12-2006, 07:00 PM

im digging the brushed black :THUMBSUP:

BLUEOVALBOY · 01-12-2006, 07:00 PM

I am interested :ORANGE:

This would be nice:
satin outer ring
black center
satin logo

3150Mach1 · 01-12-2006, 07:24 PM

Quote:

Originally Posted by 03mach1

Working on getting more pics, they are getting machined right now. It might be the same one on eBay.?? I thought they looked familiar. Working directly with the vendor. They are a brushed satin black very similiar to these...

This is the best I can do for now. These are for the 05-06, but you get the idea.

Thanks!

Dave: So these will say Mach1 and will be for our 03/04s?

ylopony · 01-12-2006, 07:42 PM

Dave, I'm sure it's the same person. The door I bought is made by Dupont Performance LLC. They did not have the Mach 1 until I inquired if he would be able to make one. If his name is Ken it's the same guy.

I hope you don't mind but here is a pic of the fuel door on a Mach. It's not the best picture but it will give you an idea. Also I have a picture of the polished one next to an 05 brushed. Can you believe that they sent me a free 05 because of several of you emailing him and ordering.Once you guys get your fuel doors I can at least have bragging rights that mine was the first Mach to have one. LOL

03D3 · 01-12-2006, 08:32 PM

I will take the brushed black

sbrooks · 01-12-2006, 09:01 PM

count me in I will take a black one

macher03 · 01-12-2006, 11:19 PM

Dang it! Just when I thought I had enough! Black one for me, three..

View Poll Results: New Mach 1 Fuel Door Interest?
Black	66	62.26%
Polished	11	10.38%
Satin Brushed (shown)	18	16.98%
Not Interested.	11	10.38%
Voters: 106. You may not vote on this poll

01-12-2006, 07:01 AM	#1
03mach1 Admin/Founder Join Date: Aug 2002 Location: Cuba, NY Posts: 6,805	*Mach 1 Fuel Door NEW* SHIPPING -NOW IN STOCK Anyone interested in this fuel Door? Let me know, we will get some and stock them and give member pricing! Working with the vendor and they are just getting them machined. Getting Pricing going on it, Probably $149 or less. I believe they will be available in 3 different styles. - Black - Polished - Satin Brushed (Shown) Okay, Final pricing is $109 + $6 S/H.** MACH 1 BLACK ONLY for this run. Non Locking sorry. ORDER: http://www.mach1performance.org/exterior.htm#mach1 BLACK SATIN/BRUSHED AVAILABLE POLISHED BRUSHED SATIN LOOK (SHOWN BELOW) Attached Thumbnails __________________ David J. Wagner Founder/Admin Member #0001 http://www.Mach1Registry.com http://www.Mach1Performance.org Amsoil T-1 Certified Independant Dealer Member, MCA '03 Mach 1, '08 V6 WIP, 76 Cobra II VIN#301788 Last edited by 03mach1; 02-15-2006 at 12:51 PM.

01-12-2006, 07:09 AM	#2
GRB60 Registered User Join Date: Feb 2004 Location: Harleysville, PA Posts: 2,144	Re: Mach 1 Fuel Door NEW I voted for black. I think it'll go best with the stripes, spoiler, etc. on my Torch Red car. __________________ 2003 Torch Red 5 spd w/ IUP Built: 7/16/03

01-12-2006, 07:47 AM	#3
03mach1 Admin/Founder Join Date: Aug 2002 Location: Cuba, NY Posts: 6,805	Re: Mach 1 Fuel Door NEW I will try and get more pics with the other selections, but I think the Black too! With the yellow.... __________________ David J. Wagner Founder/Admin Member #0001 http://www.Mach1Registry.com http://www.Mach1Performance.org Amsoil T-1 Certified Independant Dealer Member, MCA '03 Mach 1, '08 V6 WIP, 76 Cobra II VIN#301788

01-12-2006, 08:22 AM	#5
Bill Hamilton Mustang owner since 1970 Join Date: Aug 2003 Location: Charleston,SC Posts: 6,245	Re: Mach 1 Fuel Door NEW Sounds good Dave, I'll be down for a black one myself . Any chance of you bringing some of the MRT "Mach 1" stuff inventory to Carlisle? __________________ Bill SUPPORTING MEMBER USAF Retired My 1970 Mach 2003 Ford Mustang Mach I---Black w/5-speed --- gone but not forgotten 2011 Shelby GT-500 --- Ingot Silver Metallic and 6-speed (Sold and Now Terrorizing the residents of New Zealand) 1970 Ford Mustang Mach 1---White w/351C-4v Shaker Hood scoop and T-5 tranny 2014 Shelby GT-500 --- White/red stripes and 6-speed 2019 Mustang Convertible Premium Package w/automatic ___________________

01-12-2006, 09:23 AM	#6
Mustanger2 Registered User Join Date: Jan 2004 Location: Grants Pass, Oregon Posts: 1,777	Re: Mach 1 Fuel Door NEW I want a black one __________________ I drive a slow Mustang....but I drive it Slow....HARD!

01-12-2006, 10:36 AM	#7
03mach1 Admin/Founder Join Date: Aug 2002 Location: Cuba, NY Posts: 6,805	Re: Mach 1 Fuel Door NEW Thanks! I will have the goodies at most shows (if I have them in stock I will bring some.) We will have them at Carlisle, Birmingham, Erie and a few other places. __________________ David J. Wagner Founder/Admin Member #0001 http://www.Mach1Registry.com http://www.Mach1Performance.org Amsoil T-1 Certified Independant Dealer Member, MCA '03 Mach 1, '08 V6 WIP, 76 Cobra II VIN#301788

01-12-2006, 12:02 PM	#8
03SHKR used to be BrianWannaMach Join Date: Apr 2003 Location: Portland, OR Posts: 1,468	Re: Mach 1 Fuel Door NEW Assuming it wasn't glossy, I would probably buy a black one. Any chance someone could post a pic of a black one with the Mach 1 script? __________________ Brian 03 DSG Mach 1, 5-Spd, w/IUP VIN 387483, Mustang Dyno: 321 rwhp/326 rwtq; 371 rwhp/466 rwtq on 100 shot - old numbers, new numbers pending - See pics of my first 86 SVO - I have two - See pics of my 67 Mustang Fastback w/ 427 Small Block - See pics of my 2003 Mach 1 Web Page, needs update for new motor, etc. - See pics of my wife’s 06 Mustang

01-12-2006, 12:09 PM	#10
2k4mach LuLz Join Date: Dec 2003 Location: Cedar Park, TX Posts: 19,294	Re: Mach 1 Fuel Door NEW are these the ones that we just had a thread on that someone found on ebay? if so i might be interested in a black one __________________ 11 Sterling gray GT500 coupe 08 Silver Z06 1058rwhp/1073rwt @ 15psi 14 Silver Q50S Vortech blown 04 DSG Mach 1 (stolen) 03 OW Mach 1 (sitting in a field rotting away)

01-12-2006, 12:18 PM	#11
DTMach1 semi-pro moderator Join Date: May 2004 Location: Virginia Beach Posts: 4,955	Re: Mach 1 Fuel Door NEW can ya mix it up a little? like black center and brushed outer ring? __________________ 2004 Mach 1 IUP/5spd/DSG Engine, etc done...sits in the garage

01-12-2006, 04:43 PM	#14
OSUALUM78 2003 Black Cobra Join Date: Oct 2005 Location: Somewhere in the middle Posts: 2,506	Re: Mach 1 Fuel Door NEW I'd go with black or satin look on my UA. Are they lockable? That would be sweet if they locked too. __________________ 2003 Black Cobra Build #2224 of 8394 Born: 08/19/02 Mods: nothing worth noting... right now Jamie: custom pedal mountain bike built by me Bettie: 2004 Black Mach 1 (sold but not forgotten)

01-12-2006, 06:12 PM	#15
03mach1 Admin/Founder Join Date: Aug 2002 Location: Cuba, NY Posts: 6,805	Re: Mach 1 Fuel Door NEW Working on getting more pics, they are getting machined right now. It might be the same one on eBay.?? I thought they looked familiar. Working directly with the vendor. They are a brushed satin black very similiar to these... This is the best I can do for now. These are for the 05-06, but you get the idea. Thanks! SHOWN ARE GT for 2005-06, but it give you and idea of the color choices Attached Thumbnails __________________ David J. Wagner Founder/Admin Member #0001 http://www.Mach1Registry.com http://www.Mach1Performance.org Amsoil T-1 Certified Independant Dealer Member, MCA '03 Mach 1, '08 V6 WIP, 76 Cobra II VIN#301788 Last edited by 03mach1; 02-15-2006 at 12:51 PM.

01-12-2006, 06:21 PM	#16
03mach1 Admin/Founder Join Date: Aug 2002 Location: Cuba, NY Posts: 6,805	Re: Mach 1 Fuel Door NEW Do you guys like the brushed black look? If so, I will order them and get them available for the first batch. __________________ David J. Wagner Founder/Admin Member #0001 http://www.Mach1Registry.com http://www.Mach1Performance.org Amsoil T-1 Certified Independant Dealer Member, MCA '03 Mach 1, '08 V6 WIP, 76 Cobra II VIN#301788

01-12-2006, 06:23 PM	#17
Karma_Energy Registered User Join Date: Jul 2004 Location: MCB Quantico VA Posts: 376	Re: Mach 1 Fuel Door NEW 1 black 1 for me! __________________ -=Mods=- Performance - Vortech V-2 SC-Trim & Aftercooler - 39lb injectors - Focus fuel pump - Magnaflow Magnapacks - MGW Shifter (orange handle) - 4.10 gears - Spec Stage 3 - Fidanza Flywheel 438.27rwhp / 407.27 torque "Jewish people don't have to kill a cracker a certain way for it to be kosher"

01-12-2006, 07:00 PM	#19
2k4mach LuLz Join Date: Dec 2003 Location: Cedar Park, TX Posts: 19,294	Re: Mach 1 Fuel Door NEW im digging the brushed black :THUMBSUP: __________________ 11 Sterling gray GT500 coupe 08 Silver Z06 1058rwhp/1073rwt @ 15psi 14 Silver Q50S Vortech blown 04 DSG Mach 1 (stolen) 03 OW Mach 1 (sitting in a field rotting away)

01-12-2006, 07:00 PM	#20
BLUEOVALBOY Registered User Join Date: Oct 2003 Location: Lake City,Fl Posts: 213	Re: Mach 1 Fuel Door NEW I am interested :ORANGE: This would be nice: satin outer ring black center satin logo __________________ Sean dsg/5spd/iup Steeda dyno 275.4rwhp 295.2tq K&N Filter Royal Purple Syn. Steeda Tri-ax T/A Diff. Cover ----------------------- 03/04 installed K&N Charger Borla Stinger Cat-back Dyno 281.3 rwhp 301.6 rwtrq

01-12-2006, 07:42 PM	#22
ylopony Registered User Join Date: Jun 2004 Location: Ohio Posts: 1,043	Re: Mach 1 Fuel Door NEW Dave, I'm sure it's the same person. The door I bought is made by Dupont Performance LLC. They did not have the Mach 1 until I inquired if he would be able to make one. If his name is Ken it's the same guy. I hope you don't mind but here is a pic of the fuel door on a Mach. It's not the best picture but it will give you an idea. Also I have a picture of the polished one next to an 05 brushed. Can you believe that they sent me a free 05 because of several of you emailing him and ordering.Once you guys get your fuel doors I can at least have bragging rights that mine was the first Mach to have one. LOL

01-12-2006, 08:32 PM	#23
03D3 Registered User Join Date: Apr 2003 Location: HERE, THERE Posts: 66	Re: Mach 1 Fuel Door NEW I will take the brushed black

01-12-2006, 09:01 PM	#24
sbrooks Registered User Join Date: Dec 2005 Location: El Paso, TX Posts: 314	Re: Mach 1 Fuel Door NEW count me in I will take a black one __________________ 2004 Black Mach 1 IUP ,Build Date 21 April 04,, 5 Speed, MGW Shifter, SCT XCAL Tune ,Flowmasters, Mac catted H-Pipe, 4:10 Gears 98 Black Cobra, Build# 3154/5174, Flowmasters, MGW shifter, JLT RAI [SIGPIC][/SIGPIC] http://sbrooks.gotstang.com http://www.svtregistry.com/cobra/199...154/index.html

01-12-2006, 11:19 PM	#25
macher03 Grab your gear... Join Date: Nov 2004 Location: Western North Carolina Posts: 1,324	Re: Mach 1 Fuel Door NEW Dang it! Just when I thought I had enough! Black one for me, three.. __________________ Turbo-charged 2003 OxFord White Mach 1 "Mandy" Custom tuned by Amazon Tuning Solutions SOLD 11/01/10 1994 Mustang GT Grabber Blue Roadcar "Roxy" SOLD 10/23/2011 Two defining forces died for you. Jesus Christ died for your soul. The American Soldier died for your freedom. Think about it. 'Those who hammer their guns into plows will plow for those who do not.' ~ Thomas Jefferson

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)