Mach going into shop tomorrow - 2003-04 Mach 1 Registry Owners Club

black_mach_03 · 01-02-2006, 02:41 PM

Lets hope all goes well

darkshadow mach · 01-02-2006, 03:05 PM

so you are installing the stage 3's after all?

RH04 · 01-02-2006, 03:50 PM

does the ported intake help w/ the cams?

ThatsBAD06 · 01-02-2006, 04:23 PM

wow the machs gonna be completely different then when it went in. If you don't mind asking how bad is the installation fee?

black_mach_03 · 01-02-2006, 06:23 PM

Yeah, the stage 3's will be going in. No one could buy them. If someone would have bought them a paxton novi 2000 would have went in. But I think Ill enjoy the cams and nitrous just as much if not more. The ported intake should help out alot with the cams or atleast until a FR500 intake goes on. As far as install prices Im not sure now since Im putting in nitrous, new axles, and diff. SVC Motorsports will be doing all the work and tuning. Dyno numbers and all that good stuff soon to come :ORANGE:.

RH04 · 01-02-2006, 07:41 PM

do you think that you will have dyno #'s before the 14th? not trying to rush you but my setup is about the same as yours is gonna be. Im just anxious to know what kind of #'s i might get and how the spacer and intake will benifit the cams.

machwizzle · 01-02-2006, 09:22 PM

What kinda shot you gonna spray cuz I have been contemplating a similar setup??

manny · 01-02-2006, 09:49 PM

I'm excited for ya! be sure and let us know what the end result is. In the meanwhile, I'll

one with ya.

machwizzle · 01-03-2006, 12:52 PM

That sounds like it has the makings of a serious ¼mile car!

<<don't know why i picked that one

black_mach_03 · 01-03-2006, 06:23 PM

Well looks like Im going to hold off on the nitrous for a while...until the new short block goes in

. Other then that everything else is all go.

black_mach_03 · 01-05-2006, 04:53 PM

Cams and vavletrain are in

machwizzle · 01-05-2006, 09:07 PM

Awesome, like I said earlier. I'm thinkin about that exact same set-up.

black_mach_03 · 01-05-2006, 09:12 PM

Quote:

Originally Posted by machwizzle

Awesome, like I said earlier. I'm thinkin about that exact same set-up.

What all do you have done to your car now. Your putting down some good numbers.

Machths1 · 01-06-2006, 01:42 PM

Quote:

Originally Posted by machwizzle

Awesome, like I said earlier. I'm thinkin about that exact same set-up.

Quote:

Originally Posted by black_mach_03

What all do you have done to your car now. Your putting down some good numbers.

Same thing I was thinking. What mods do you have Machwizzle?

01-02-2006, 02:41 PM	#1
black_mach_03 Registered User Join Date: Jan 2004 Location: Tucson, AZ Posts: 432	Mach going into shop tomorrow Lets hope all goes well __________________ BONE STOCK

01-02-2006, 03:05 PM	#2
darkshadow mach one lucky guy Join Date: Apr 2005 Location: Sugar Land, TX Posts: 477	Re: Mach going into shop tomorrow so you are installing the stage 3's after all?

01-02-2006, 03:50 PM	#3
RH04 Registered User Join Date: Dec 2005 Location: stl,mo Posts: 34	Re: Mach going into shop tomorrow does the ported intake help w/ the cams?

01-02-2006, 04:23 PM	#4
ThatsBAD06 The Thread Killer Join Date: Jan 2004 Location: Burke,VA Posts: 814	Re: Mach going into shop tomorrow wow the machs gonna be completely different then when it went in. If you don't mind asking how bad is the installation fee? __________________ 2004 Black Mach 1 297.77 RWHP & 320.27 RWTQ 1/4 mile: 13.230 @ 106.43, 1.979 60' 1/8 mile: 8.568 @ 84.54, 1.979 60' -MAC Catted Prochamber w/ Magnaflow MagnaPacks -Ported/Polished Intake & PHP Intake Spacer -K&N Drop In Air Filter w/ snorkel & maf screen removed -MGW Short Throw Shifter (Blue) -FRPP 4.10's & Aluminum Driveshaft -Moser 31 splines w/ Detroit Truetrac posi -Black Bullitts(17x9,10.5) wrapped in GSD3's (255x40x17 F 285x40x17 R)

01-02-2006, 06:23 PM	#5
black_mach_03 Registered User Join Date: Jan 2004 Location: Tucson, AZ Posts: 432	Re: Mach going into shop tomorrow Yeah, the stage 3's will be going in. No one could buy them. If someone would have bought them a paxton novi 2000 would have went in. But I think Ill enjoy the cams and nitrous just as much if not more. The ported intake should help out alot with the cams or atleast until a FR500 intake goes on. As far as install prices Im not sure now since Im putting in nitrous, new axles, and diff. SVC Motorsports will be doing all the work and tuning. Dyno numbers and all that good stuff soon to come :ORANGE:. __________________ BONE STOCK

01-02-2006, 07:41 PM	#6
RH04 Registered User Join Date: Dec 2005 Location: stl,mo Posts: 34	Re: Mach going into shop tomorrow do you think that you will have dyno #'s before the 14th? not trying to rush you but my setup is about the same as yours is gonna be. Im just anxious to know what kind of #'s i might get and how the spacer and intake will benifit the cams.

01-02-2006, 09:22 PM	#7
machwizzle Registered User Join Date: Jan 2005 Posts: 115	Re: Mach going into shop tomorrow What kinda shot you gonna spray cuz I have been contemplating a similar setup?? __________________ 332.6HP 363.9TQ Most of the typical bolt-ons..................

01-02-2006, 09:49 PM	#8
manny Registered User Join Date: Aug 2004 Location: kansas city, ks. Posts: 1,123	Re: Mach going into shop tomorrow I'm excited for ya! be sure and let us know what the end result is. In the meanwhile, I'll one with ya. __________________ 04 Mach1 5-spd, NOS (100 shot), goes 11.7's in the 1/4

01-03-2006, 12:52 PM	#9
machwizzle Registered User Join Date: Jan 2005 Posts: 115	Re: Mach going into shop tomorrow That sounds like it has the makings of a serious ¼mile car! <<don't know why i picked that one __________________ 332.6HP 363.9TQ Most of the typical bolt-ons..................

01-03-2006, 06:23 PM	#10
black_mach_03 Registered User Join Date: Jan 2004 Location: Tucson, AZ Posts: 432	Re: Mach going into shop tomorrow Well looks like Im going to hold off on the nitrous for a while...until the new short block goes in . Other then that everything else is all go. __________________ BONE STOCK

01-05-2006, 04:53 PM	#11
black_mach_03 Registered User Join Date: Jan 2004 Location: Tucson, AZ Posts: 432	Re: Mach going into shop tomorrow Cams and vavletrain are in __________________ BONE STOCK

01-05-2006, 09:07 PM	#12
machwizzle Registered User Join Date: Jan 2005 Posts: 115	Re: Mach going into shop tomorrow Awesome, like I said earlier. I'm thinkin about that exact same set-up. __________________ 332.6HP 363.9TQ Most of the typical bolt-ons..................

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)