|
03-11-2015, 05:46 PM | #1 |
Oxford White 03 mach 1
Join Date: Oct 2006
Location: Menlo Park, CA
Posts: 127
|
Kenny Brown 3-pt strut brace
I will be lowering my car with H&R super sports and also installing koni shocks and struts.
My question is, can I make the necessary adjustments with the Kenny Brown plates that are a part of the brace or will i need to get separate caster-camber plates? |
03-13-2015, 10:17 AM | #2 |
Oxford White 03 mach 1
Join Date: Oct 2006
Location: Menlo Park, CA
Posts: 127
|
Re: Kenny Brown 3-pt strut brace
any one have any experience with the kenny brown srut brace and lowered car?
|
03-13-2015, 02:18 PM | #3 |
Chairman of "The Bored"
Join Date: Sep 2004
Location: A CORNFIELD IN OH
Posts: 2,001
|
Re: Kenny Brown 3-pt strut brace
Man, I had one on my car years ago before I put a blower on it. I do not remember ever having issues but I would try to email or calling KB. I still have a 90 KB LX and I talk to them occasionally for reference info.
__________________
2014 GT500 Black/Black 03 TORCH RED MACH V7 YSI and Some Other Stuff 03 DSG MACH 90 Kenny Brown Super LX 89 LX BBF as seen on Pinks 5/11-SOLD 11 F450 Lariat A Couple Tuber Buells |
03-13-2015, 03:06 PM | #4 |
saving pennies
Join Date: Apr 2008
Location: Griffin, Ga
Posts: 1,487
|
Re: Kenny Brown 3-pt strut brace
The brace itself doesn't adjust any caster/camber. It sits below the caster camber plates as you can see from this picture.
__________________
03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels 03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87” pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|