F/S Mach 1 Custom ID Tags/Plates - 2003-04 Mach 1 Registry Owners Club

JBrown · 11-25-2011, 09:22 AM

Updated 02-05-12

As many of you know I started reproducing a redesigned copy of the Mach 1 and Terminator ID Tags that Gary had done for several years. I was recently contacted by the intellectual counsel for Ford Motor Company and asked to stop reproducing items using the Ford Marks. Unfortunately I am not able to offer the Terminator ID Tag or the Mach 1 Tag that has been so popular for years. I am able to offer a version that is slightly different and has no Ford trademarks present.

Attached below you should be able to see the preproduction sample (Terminator version) that I picked up a few days ago. I wanted to wait until the photos were available before accepting any orders. That way each of you can view the item that will be going into production and decide if the quality meets your expectations. This sample is the identical size and shape to the original that has been discontinued. It has been designed to fit in the engine compartment on the radiator cover. The owner’s name and vehicle specific information will be engraved while the standard information will be screened on to the plate in black ink.

I will be collecting prepaid orders over the next week or so before closing out the production run and processing all of the orders at one time. At this time I am not planning on doing another production run so if you are interested you should order now. If you don’t have your build number or build date you can still prepay for a plate and I will set it aside for you until the information can be provided. That way you will be able to secure your plate before they are gone. I would like to close the ordering process and go into production on Friday February 17, 2012. If that date can be met the plates will be ready to ship on or around Friday February 24, 2012.

To order your plate you can PayPal $44.50 to the following.

Jbrown6@tampabay.rr.com

Don't forget to include your vehicle VIN, Model year, Build date, and Build sequence number in the PayPal note section along with your name. Custom HP & TQ #’s will be used if a link to a dyno sheet is supplied. Factory ratings will be used if no dyno data is available. If factory ratings are used the “RWHP & RWTQ” will not be engraved.

Two points will be corrected on the final production piece. Spacing on the engraved letters will be more consistent and "HorsePower" will be two words.

Please use the same e-mail address for any questions or feel free to PM me here.

Here is a photo shopped version of the new Mach 1 Tag. The second line has been revised and the word “SUPERCHARGED” has been removed. That is the only difference between the Terminator version and the Mach 1 version.

Note: No FMC trademarks were injured during testing and production of this new design.

stampde · 11-26-2011, 10:08 AM

nice ,i'm interested !!!

smith30 · 11-26-2011, 11:11 PM

Nice, should be a good amount of interest!

Murder Snake · 11-26-2011, 11:42 PM

do you do cobra ones too?

JBrown · 11-27-2011, 08:15 AM

xxxxxxxxxxxxxxxxx

626socalstang · 11-27-2011, 09:33 PM

Definitely interested, how do I find the build date and build number since I bought mine used from a private seller?

626socalstang · 11-27-2011, 11:04 PM

Thanks!

cruzmach1 · 11-28-2011, 08:32 PM

How do these attach to the engine?

cruzmach1 · 11-28-2011, 09:15 PM

Quote:

Originally Posted by Big Ron

They don't attach to the engine. I put mine right underneath where this one is so that it would not interfere with the hood prop rod. It doesn't matter if you have replaced with hood struts though.

Not a picture of my car.

Got Ya! Thanks

Big Ron · 11-28-2011, 09:20 PM

I think he is trying to supply double-sided tape for actual attachment.

I think you need one!

Big Ron

slvr35th · 11-28-2011, 09:25 PM

I want one! Do I just need to pay for it and then wait for my cert to get here then give you the info?

JBrown · 11-28-2011, 10:11 PM

xxxxxxxxxxxxxxxxxxx

JBrown · 11-29-2011, 11:49 PM

xxxxxxxxxxxxxxxxx.

rcode99 · 11-30-2011, 12:17 AM

Did you get my envelope, Jeff?

Bob
Wecthester

2004mw · 11-30-2011, 12:25 AM

pm sent

JBrown · 11-30-2011, 06:14 AM

xxxxxxxxxxxxxxxxxxxx

JBrown · 11-30-2011, 06:15 AM

Quote:

Originally Posted by 2004mw

pm sent

PM replied.

JBrown · 12-01-2011, 06:16 AM

xxxxxxxxxxxxxxxxxxxxx

Unrealford · 12-01-2011, 09:27 AM

Quote:

Originally Posted by Big Ron

They don't attach to the engine. I put mine right underneath where this one is so that it would not interfere with the hood prop rod. It doesn't matter if you have replaced with hood struts though.

Not a picture of my car.

That was my car!!

slvr35th · 12-01-2011, 09:08 PM

money sent!!

stang8092 · 12-01-2011, 09:43 PM

Payment sent.

JBrown · 12-01-2011, 10:04 PM

xxxxxxxxxxxxxxxx

JBrown · 12-02-2011, 06:23 AM

xxxxxxxxxxxxxxxxxxxx

JBrown · 12-02-2011, 07:53 PM

xxxxxxxxxxxxxxxx

JBrown · 12-04-2011, 07:17 AM

xxxxxxxxxxxxxxxxxxx

11-25-2011, 09:22 AM	#1
JBrown Registered User Join Date: Jun 2011 Location: Largo Posts: 85	F/S Mach 1 Custom ID Tags/Plates Updated 02-05-12 As many of you know I started reproducing a redesigned copy of the Mach 1 and Terminator ID Tags that Gary had done for several years. I was recently contacted by the intellectual counsel for Ford Motor Company and asked to stop reproducing items using the Ford Marks. Unfortunately I am not able to offer the Terminator ID Tag or the Mach 1 Tag that has been so popular for years. I am able to offer a version that is slightly different and has no Ford trademarks present. Attached below you should be able to see the preproduction sample (Terminator version) that I picked up a few days ago. I wanted to wait until the photos were available before accepting any orders. That way each of you can view the item that will be going into production and decide if the quality meets your expectations. This sample is the identical size and shape to the original that has been discontinued. It has been designed to fit in the engine compartment on the radiator cover. The owner’s name and vehicle specific information will be engraved while the standard information will be screened on to the plate in black ink. I will be collecting prepaid orders over the next week or so before closing out the production run and processing all of the orders at one time. At this time I am not planning on doing another production run so if you are interested you should order now. If you don’t have your build number or build date you can still prepay for a plate and I will set it aside for you until the information can be provided. That way you will be able to secure your plate before they are gone. I would like to close the ordering process and go into production on Friday February 17, 2012. If that date can be met the plates will be ready to ship on or around Friday February 24, 2012. To order your plate you can PayPal $44.50 to the following. Jbrown6@tampabay.rr.com Don't forget to include your vehicle VIN, Model year, Build date, and Build sequence number in the PayPal note section along with your name. Custom HP & TQ #’s will be used if a link to a dyno sheet is supplied. Factory ratings will be used if no dyno data is available. If factory ratings are used the “RWHP & RWTQ” will not be engraved. Two points will be corrected on the final production piece. Spacing on the engraved letters will be more consistent and "HorsePower" will be two words. Please use the same e-mail address for any questions or feel free to PM me here. Here is a photo shopped version of the new Mach 1 Tag. The second line has been revised and the word “SUPERCHARGED” has been removed. That is the only difference between the Terminator version and the Mach 1 version. Note: No FMC trademarks were injured during testing and production of this new design. Last edited by JBrown; 02-05-2012 at 10:52 PM.

11-26-2011, 10:08 AM	#2
stampde Registered User Join Date: Jul 2004 Location: Berlin ,N.J. Posts: 789	Re: F/S Mach 1 Custom ID Tags/Plates nice ,i'm interested !!! __________________ Flirtin' With Disaster Kooks 1 5/8 Long Tubes and off road X-Pipe Magna Flow cat back JLT cold air system Intake spacer Steeda Underdrive Pulleys Steeda Tri Ax Shifter Johnny Lightning Performance Tune/Diablo Sport Chip FRP 4.10's , Roush T/A Cover Edelbrock adjustable upper arms Edelbrock lower control arms Dyno/ 311.7 horse - 331 torque ( new dyno #'s to come ) 1/4 mile best: 12.71 et , 108.79 mph

11-26-2011, 11:11 PM	#3
smith30 Registered User Join Date: Dec 2010 Location: walton, ky Posts: 1,131	Re: F/S Mach 1 Custom ID Tags/Plates Nice, should be a good amount of interest! __________________ 95 Camaro Z28 - current (DD and autocross toy) 99 Cobra - sold 04 GTO M6 - sold 03 Mach 1 - sold 04 GT - sold

11-26-2011, 11:42 PM	#4
Murder Snake Registered User Join Date: Apr 2004 Location: florida Posts: 2,194	Re: F/S Mach 1 Custom ID Tags/Plates do you do cobra ones too? __________________ 1996 Cobra #6840 formerly, Frankenstang Two defining forces died for you. Jesus Christ died for your soul. The American Soldier died for your freedom. Think about it. "....be the lightning in me that strikes relentless." "It's a lot easier to pacify a country when it's citizens can't shoot back" Gray Anderson, Mayor, "Jericho"

11-27-2011, 08:15 AM	#5
JBrown Registered User Join Date: Jun 2011 Location: Largo Posts: 85	Re: F/S Mach 1 Custom ID Tags/Plates xxxxxxxxxxxxxxxxx Last edited by JBrown; 01-11-2012 at 06:56 PM.

11-27-2011, 09:33 PM	#6
626socalstang Registered User Join Date: Nov 2011 Location: Arcadia, California Posts: 452	Re: F/S Mach 1 Custom ID Tags/Plates Definitely interested, how do I find the build date and build number since I bought mine used from a private seller? __________________ -You just can't weld all your problems-

11-27-2011, 11:04 PM	#7
626socalstang Registered User Join Date: Nov 2011 Location: Arcadia, California Posts: 452	Re: F/S Mach 1 Custom ID Tags/Plates Thanks! __________________ -You just can't weld all your problems-

11-28-2011, 08:32 PM	#8
cruzmach1 cruzmach1 Join Date: Sep 2009 Location: Bronx NY Posts: 801	Re: F/S Mach 1 Custom ID Tags/Plates How do these attach to the engine? __________________ 2004 Mustang mach 1 (5-Speed) Vortech V-2 with intercooler 455RWHP & 396RWTQ Mustang Magic Tune 3/8 PHP Intake Spacer Mac 5/8 Long Tube Headers Mac Catted H-Pipe Magnaflow Cat Back Steeda Short throw shifter

11-28-2011, 09:20 PM	#10
Big Ron Original 03 TR Owner Join Date: Apr 2004 Location: Waco, TX Posts: 2,860	Re: F/S Mach 1 Custom ID Tags/Plates I think he is trying to supply double-sided tape for actual attachment. I think you need one! Big Ron

11-28-2011, 09:25 PM	#11
slvr35th Registered User Join Date: Nov 2009 Location: Cleveland, Ok Posts: 307	Re: F/S Mach 1 Custom ID Tags/Plates I want one! Do I just need to pay for it and then wait for my cert to get here then give you the info? __________________ 2004 Mach 1 Procharged _D1sc Polished 17#_T-56_Carbon Fiber DS_Division X_Fore_Lethal_Anderson_Tial_MGW_Mahley_Spec_

11-28-2011, 10:11 PM	#12
JBrown Registered User Join Date: Jun 2011 Location: Largo Posts: 85	Re: F/S Mach 1 Custom ID Tags/Plates xxxxxxxxxxxxxxxxxxx Last edited by JBrown; 01-11-2012 at 06:56 PM.

11-29-2011, 11:49 PM	#13
JBrown Registered User Join Date: Jun 2011 Location: Largo Posts: 85	Re: F/S Mach 1 Custom ID Tags/Plates xxxxxxxxxxxxxxxxx. Last edited by JBrown; 01-11-2012 at 06:56 PM.

11-30-2011, 12:17 AM	#14
rcode99 Registered User Join Date: Sep 2003 Location: Northeast Illinois Posts: 2,235	Re: F/S Mach 1 Custom ID Tags/Plates Did you get my envelope, Jeff? Bob Wecthester __________________ RCode99 U.S.A.F (Ret'd) "Never slap a man who has a mouthful of chewing tobacco." Will Rogers said that.

11-30-2011, 12:25 AM	#15
2004mw Registered User Join Date: May 2011 Location: United States Posts: 198	Re: F/S Mach 1 Custom ID Tags/Plates pm sent

11-30-2011, 06:14 AM	#16
JBrown Registered User Join Date: Jun 2011 Location: Largo Posts: 85	Re: F/S Mach 1 Custom ID Tags/Plates xxxxxxxxxxxxxxxxxxxx Last edited by JBrown; 01-11-2012 at 06:56 PM.

12-01-2011, 06:16 AM	#18
JBrown Registered User Join Date: Jun 2011 Location: Largo Posts: 85	Re: F/S Mach 1 Custom ID Tags/Plates xxxxxxxxxxxxxxxxxxxxx Last edited by JBrown; 01-11-2012 at 06:56 PM.

12-01-2011, 09:08 PM	#20
slvr35th Registered User Join Date: Nov 2009 Location: Cleveland, Ok Posts: 307	Re: F/S Mach 1 Custom ID Tags/Plates money sent!! __________________ 2004 Mach 1 Procharged _D1sc Polished 17#_T-56_Carbon Fiber DS_Division X_Fore_Lethal_Anderson_Tial_MGW_Mahley_Spec_

12-01-2011, 09:43 PM	#21
stang8092 Registered User Join Date: Jul 2011 Location: Chicopee, MA Posts: 498	Re: F/S Mach 1 Custom ID Tags/Plates Payment sent. __________________ '03 AB Mach 1 (x2), '87 Saleen #223, '92 s/c Saleen clone, '80 Mustang

12-01-2011, 10:04 PM	#22
JBrown Registered User Join Date: Jun 2011 Location: Largo Posts: 85	Re: F/S Mach 1 Custom ID Tags/Plates xxxxxxxxxxxxxxxx Last edited by JBrown; 01-11-2012 at 06:56 PM.

12-02-2011, 06:23 AM	#23
JBrown Registered User Join Date: Jun 2011 Location: Largo Posts: 85	Re: F/S Mach 1 Custom ID Tags/Plates xxxxxxxxxxxxxxxxxxxx Last edited by JBrown; 01-11-2012 at 06:56 PM.

12-02-2011, 07:53 PM	#24
JBrown Registered User Join Date: Jun 2011 Location: Largo Posts: 85	Re: F/S Mach 1 Custom ID Tags/Plates xxxxxxxxxxxxxxxx Last edited by JBrown; 01-11-2012 at 06:57 PM.

12-04-2011, 07:17 AM	#25
JBrown Registered User Join Date: Jun 2011 Location: Largo Posts: 85	Re: F/S Mach 1 Custom ID Tags/Plates xxxxxxxxxxxxxxxxxxx Last edited by JBrown; 01-11-2012 at 06:57 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)