|
|
NEW Mach 1 Owner Introductions NEW Owner's, Say HI and intro yourself here! |
|
Thread Tools | Display Modes |
10-23-2007, 12:41 AM | #1 |
Registered User
Join Date: Oct 2007
Location: Stw, Ok
Posts: 4
|
Any advice for hopeful Mach owner??
Hi to all.
I've been saving two years now and the time has finally come.... I've found an '03 azure, bone stock. Going to do last minute check-up before purchase. Anything I should watch out for? Thanks in advance for any advice. Can't wait to be a mach-driving member next week!! |
10-23-2007, 12:43 AM | #2 |
Too many cars to mod
Join Date: Jun 2006
Location: Louisville, KY
Posts: 6,945
|
Re: Any advice for hopeful Mach owner??
advice is....get ready to be broke because of the modding you will do
__________________
Current Rides: 2011 Ford Fusion 2003 MG Terminator, 2.3 whipple Previous Rides: 2003 DSG Lightning, 486/586, 12.09@111.25 2007 F150 Lariat 4wd Screw 2004 OW Mach 1, auto, 1 of 179 2003 DSG Mach 1, 574 rwhp / 528 rwtq 2003 DSG Mach 1, 13.1 @ 109.1 1988 Mustang GT, stock 1967 TB Coupe, project 1965 Fastback 2+2, A-code |
10-23-2007, 12:44 AM | #3 |
Guest
Join Date: Apr 2007
Location: Denver, CO
Posts: 3,152
|
Re: Any advice for hopeful Mach owner??
Just have a mechanic and go over the car with a fine tooth comb.
LS |
10-23-2007, 01:48 AM | #4 |
My First Mach, Jan. 1969
Join Date: Jan 2005
Location: Tacoma, Washington
Posts: 13,070
|
Re: Any advice for hopeful Mach owner??
Good luck on your purchase and Welcome from Tacoma, Washington.:THUMBSUP:
__________________
I couldn't repair your brakes, so I made your horn louder. Mach 1 owner since January 1969. First ride in a P51D August 28,2010. Member Based in Kent, Washington, Pacific Cascade Mustang Club is the only original Mustang club in the Puget Sound Area and according to Mustang Club of America, we are the oldest in the nation. |
10-23-2007, 01:56 AM | #5 | |
CAT MASTA!
Join Date: Jun 2007
Location: Vero Beach, Florida
Posts: 3,406
|
Re: Any advice for hopeful Mach owner??
Quote:
also steer clear of UD pulleys! nothing but problems from those welcome to the reg!
__________________
04' Torched 6-speed Build Date: 02/25/2004 Ported Eaton @7psi Viper T-56 Built 8.8,4.10's 441/402 |
|
10-23-2007, 06:22 AM | #6 | |
Registered User
Join Date: Aug 2007
Location: TN
Posts: 382
|
Re: Any advice for hopeful Mach owner??
Quote:
If you cannot, look for obvious stuff like any kind of fluid leaks, check everything electrical (wipers, signals, etc), run (or have someone run) a carfax, and test drive like it is going to be driven. Welcome ! |
|
10-23-2007, 07:55 AM | #7 |
Registered User
Join Date: Jan 2007
Location: Stafford, VA
Posts: 802
|
Re: Any advice for hopeful Mach owner??
I would just like to say, Beware of whiplash because the Mach is still one of the fastest American cars out there today even bone stock.
Also be prepared for premium fuel only. Get us some pics!!!!
__________________
'03 Azure Mach 1: auto., IUP, JLT CAI. BUILD DATE:02/03/2003 Purchased: 01/02/07 '94 Mitsubishi 3000GT SL: 5-speed '87 IROC-Z: Crate 320rwhp Vortec T.P.I., many mods |
10-23-2007, 10:07 AM | #8 | |
"God of Thunder"
Join Date: Jan 2007
Location: DC
Posts: 1,076
|
Re: Any advice for hopeful Mach owner??
Quote:
They are out there. If you've been patient for two years, another few months won't set you back to purchase exactly what you are looking for... |
|
10-23-2007, 11:30 AM | #9 |
Registered User
Join Date: Mar 2007
Location: Ocala, Fl
Posts: 230
|
Re: Any advice for hopeful Mach owner??
1. Buy the car fax report. I eliminated many cars due to discrepancies on the car fax. Like mileage that did not agree with the odometer reading, Damage reports on car fax. Just because it is not on car fax does not mean the car was not damaged. Run you finger around the entire door, hood and trunk seams you are trying to find rough edges from a repaint. The factory should be smooth. Under the hood look at the fender mounting bolts and see if the fender was moved. You cal tell by the marks on the paint by the bolts.
2. Get the VIN # take it to the Ford service department and ask the to pull up the repair history on the car. 3. Go to auto trader and search for Ford, Mustang, key word mach 1, any distance and see what the asking price is. 4. Sell everything you have, http://cgi.ebay.com/ebaymotors/ws/eB...159549490&rd=1 you have just entered the realm of NEED FOR SPEED 5. ENJOY |
10-23-2007, 11:41 AM | #10 |
Registered User
Join Date: Oct 2007
Location: Stw, Ok
Posts: 4
|
Re: Any advice for hopeful Mach owner??
It's an '03 with 19K and they're asking $19K. I'm gonna print this page off and take it with me. Incredible advice gentlemen. I would have never thought to do half of this stuff. muy apprecioso.
|
10-23-2007, 11:48 AM | #11 |
Registered User
Join Date: Jun 2007
Location: Castle Rock, CO
Posts: 438
|
Re: Any advice for hopeful Mach owner??
Welcome from Kansas. Good luck with your purchase!
__________________
2003 Black Mach 1 automatic, IUP Born 6/20/03 PHP intake spacer, FRPP alum drive shaft MRT H-pipe w/cats, SLP LM2 catback Lowered-Hotchkis cc, Steeda kit, Vogtland springs MGW & UPR accessories, Baer drilled/slotted rotors NGK Iridium TR55IX plugs,TCI tranny pan IAC restrictor plate, 3.90 rear gears Vortec V-2 SQ SCI-TRIM Dynojet: 403 RWHP, 377 RWTQ 6.5 psi boost 1967 Coupe Born 9/13/66 369 Dart Block Stroker, nitrous |
10-23-2007, 11:56 AM | #12 |
No mames....
Join Date: May 2006
Location: Del Rio, Texas
Posts: 2,449
|
Re: Any advice for hopeful Mach owner??
welcome
__________________
sold all my cars.. |
10-23-2007, 12:03 PM | #13 |
Slowmatic
Join Date: Nov 2003
Location: Rockwall, Texas
Posts: 635
|
Re: Any advice for hopeful Mach owner??
The only advice I can give you is get a BLACK Mach
__________________
04 Black Mach 1 (Auto) 12.882@105.14 Mach Garage 90 Red SC GT 12.456@111.39 GT Garage 96 Mystic Cobra 15.085@93.80 Cobra Garage 04 Bonneville SLE |
10-23-2007, 02:31 PM | #14 |
10 second club!
Join Date: Jul 2007
Location: Royal Palm Beach FL.
Posts: 2,472
|
Re: Any advice for hopeful Mach owner??
Torch red is the fastest color, ask Wild Bill. Also make sure you check for odd sounds like humming from the rear. Mine needs axle bearings. Also brakes, even if you do them yourself are expensive. But at 19000 miles you should be OK. Price seems good also. Good luck. Oh yea and make room in your garage for doors. And say goodbye to all your friends with chebbys or dodges or pontiwrecks you will loose many as you embarrass them in your Mach.
__________________
2014 GHIG GT auto soon to have the whoosh 03 Torch red auto (gone) |
10-23-2007, 08:38 PM | #15 |
Guest
Posts: n/a
|
Re: Any advice for hopeful Mach owner??
What about the infamous 'tick' I keep reading about? Is that a real problem to worry about guys? I read the 04's got rid of the tick, but that the 03's had a noticeable tick on the left head.
|
10-23-2007, 08:44 PM | #16 |
no, it's not my husband's
Join Date: Feb 2005
Location: Puerto Rico
Posts: 166
|
Re: Any advice for hopeful Mach owner??
owing a mach 1 gives you the heavenly right to be ANAL!!!!!
|
10-24-2007, 03:55 AM | #17 |
Registered User
Join Date: Oct 2007
Location: Stw, Ok
Posts: 4
|
Re: Any advice for hopeful Mach owner??
I've heard of the cobras having a tick, didnt know it applied to the machs also. I'll watch out for it.
|
10-24-2007, 05:56 AM | #18 |
Love my Mach
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
|
Re: Any advice for hopeful Mach owner??
Go to the TSB section and read up on all the issues then look for them. If still under warrenty then take it in. If not then try some of the fixes yourself except for the tick of course.
I have an 03 with 19K on the clock and no tick yet. Car has made about 75 passes down the track as well. It is related to an over heated drivers side head. I don't hot lap the car and cool it all the way down between runs. If it has the tick then its just an excuse to pull the heads and have them PPd and rebuilt with new cans, springs, valves etc. Good luck.
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt |
10-24-2007, 09:32 AM | #19 |
Love at first sight
Join Date: Sep 2005
Location: Massachusetts
Posts: 404
|
Re: Any advice for hopeful Mach owner??
Buy one and enjoy.Welcome
__________________
Mach1 gotta Love it!. |
10-24-2007, 01:08 PM | #20 |
Guest
Posts: n/a
|
Re: Any advice for hopeful Mach owner??
He's looking for the same color as me That azure blue is an amazing color besides the screaming yellow Not sure which I am gonna search for first.
|
10-24-2007, 01:14 PM | #21 |
Registered User
Join Date: Feb 2004
Location: Arlington Heights, IL
Posts: 641
|
Re: Any advice for hopeful Mach owner??
Make sure whenever you walk away from your car, you turn around and look at it for a few seconds at least, completely stunned at how you are fortunate enough to own such a thing of beauty....
http://i202.photobucket.com/albums/a...nightshot1.jpg
__________________
Azure 2003 Mach 1 - 5spd First Eaton swap - 446 rwhp |
10-24-2007, 01:59 PM | #22 |
Guest
Posts: n/a
|
Re: Any advice for hopeful Mach owner??
OH yeah baby! Nice shot.
|
10-24-2007, 03:12 PM | #23 |
8LB YNER
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
|
Re: Any advice for hopeful Mach owner??
Advice, buy mine. LOL
__________________
Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12... |
10-24-2007, 04:17 PM | #24 | |
Registered User
Join Date: Aug 2007
Location: TN
Posts: 382
|
Re: Any advice for hopeful Mach owner??
Quote:
|
|
10-24-2007, 04:42 PM | #25 |
Guest
Posts: n/a
|
Re: Any advice for hopeful Mach owner??
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|