2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Engine & Drivetrain (Including trans & rear axles)

Reply
 
Thread Tools Display Modes
Old 06-20-2006, 06:23 PM   #1
o3BlueMach1
Registered User
 
Join Date: Feb 2006
Location: Fairfield, CA
Posts: 510
Installed PHP Spacer, Now Check Engine Light!

Installed PHP spacer, drove around a minute...... service engine light comes on...... 2 DTC's System too lean bank 1, System too Lean bank 2...... so... what do I do?
__________________
2003 Azure Blue Mach 1 w/ IUP
http://www.youtube.com/watch?v=0_zD6QnuMPE
Joined the 12 Second Club on 5-15-08!
JLT RAI, PHP Spacer
Magnaflow Catback, SLP X-Pipe
MGW Shifter, Centerforce Dual Friction, Fidanza Flywheel, Fiores Quadrant and Adjuster
Nitto 315/35/17 DR's, 10th Ann. Cobra Wheels
FRPP 4.10's, Strange 31 Spline Axles, Auburn ECTED Carrier
SCT XCal2, Dyno Tune from AED.
302whp,326wtq
Mods Coming Soon:
Thinking about an Eaton Swap...
o3BlueMach1 is offline   Reply With Quote
Old 06-20-2006, 06:29 PM   #2
hawk
Braderunna
 
hawk's Avatar
 
Join Date: May 2004
Location: hampton, va
Posts: 4,949
Re: Installed PHP Spacer, Now Check Engine Light!

make sure you didn't tear the gasket, and your EGR is tight.
__________________
"Sparky"- 2003 Azure Blue w/MT and IUP

Visit my garage on mach1mustang.org for details.
hawk is offline   Reply With Quote
Old 06-20-2006, 06:33 PM   #3
machstang23
Mamma I'm Goin' Fast
 
machstang23's Avatar
 
Join Date: May 2005
Location: Titusville, FL
Posts: 356
Re: Installed PHP Spacer, Now Check Engine Light!

I know the biggest pain of the whole install is the EGR, so I would make sure that it is secured properly...
__________________
03' Torch Red
MRT Streetsmart CAI
O/R Prochamber
SLP LM2 cat-back
MGW shifter (orange handle)
Fiore Quadrant and F/W adjuster
Steeda sport springs
Steeda LCA's & FRPP HD UCA's
Custom SCT dyno tune by VMP Tuning
http://img465.imageshack.us/img465/4239/mach46hk.png
machstang23 is offline   Reply With Quote
Old 06-20-2006, 06:36 PM   #4
birdman941
Torque wins!
 
birdman941's Avatar
 
Join Date: Dec 2004
Location: Florida
Posts: 13,167
Re: Installed PHP Spacer, Now Check Engine Light!

Make sure the PCV valve tube is tight. ( vacuum leak?)
Make sure the electrical solenoid forward of the EGR is plugged in.
Make sure no wiring got caught under the spacer or pinched.
Too late now but:
http://www.mach1registry.org/forums/...7&postcount=16
__________________
The ORIGINAL Project R build thread is back !

5.4 32V NA
Streetable 404/387 26.56 MPG


"I don't like repeat offenders,
I like DEAD offenders" Ted Nugent

"A big engine hardly working is more efficient
than a little engine screaming its head off" Jay Leno
birdman941 is offline   Reply With Quote
Old 06-20-2006, 07:01 PM   #5
o3BlueMach1
Registered User
 
Join Date: Feb 2006
Location: Fairfield, CA
Posts: 510
Re: Installed PHP Spacer, Now Check Engine Light!

another thing i found out is my adaptive fuel trim is +25%......
__________________
2003 Azure Blue Mach 1 w/ IUP
http://www.youtube.com/watch?v=0_zD6QnuMPE
Joined the 12 Second Club on 5-15-08!
JLT RAI, PHP Spacer
Magnaflow Catback, SLP X-Pipe
MGW Shifter, Centerforce Dual Friction, Fidanza Flywheel, Fiores Quadrant and Adjuster
Nitto 315/35/17 DR's, 10th Ann. Cobra Wheels
FRPP 4.10's, Strange 31 Spline Axles, Auburn ECTED Carrier
SCT XCal2, Dyno Tune from AED.
302whp,326wtq
Mods Coming Soon:
Thinking about an Eaton Swap...
o3BlueMach1 is offline   Reply With Quote
Old 06-20-2006, 07:44 PM   #6
o3BlueMach1
Registered User
 
Join Date: Feb 2006
Location: Fairfield, CA
Posts: 510
Re: Installed PHP Spacer, Now Check Engine Light!

had to be something simple..... stupid egr gasket only in one bolt hole ....

FIXED NOW.....

but my adaptive fuel trim is still in the +15% range... is this normal?
__________________
2003 Azure Blue Mach 1 w/ IUP
http://www.youtube.com/watch?v=0_zD6QnuMPE
Joined the 12 Second Club on 5-15-08!
JLT RAI, PHP Spacer
Magnaflow Catback, SLP X-Pipe
MGW Shifter, Centerforce Dual Friction, Fidanza Flywheel, Fiores Quadrant and Adjuster
Nitto 315/35/17 DR's, 10th Ann. Cobra Wheels
FRPP 4.10's, Strange 31 Spline Axles, Auburn ECTED Carrier
SCT XCal2, Dyno Tune from AED.
302whp,326wtq
Mods Coming Soon:
Thinking about an Eaton Swap...
o3BlueMach1 is offline   Reply With Quote
Old 06-20-2006, 07:44 PM   #7
birdman941
Torque wins!
 
birdman941's Avatar
 
Join Date: Dec 2004
Location: Florida
Posts: 13,167
Re: Installed PHP Spacer, Now Check Engine Light!

Did you reset the PCM?
__________________
The ORIGINAL Project R build thread is back !

5.4 32V NA
Streetable 404/387 26.56 MPG


"I don't like repeat offenders,
I like DEAD offenders" Ted Nugent

"A big engine hardly working is more efficient
than a little engine screaming its head off" Jay Leno
birdman941 is offline   Reply With Quote
Old 06-20-2006, 07:48 PM   #8
o3BlueMach1
Registered User
 
Join Date: Feb 2006
Location: Fairfield, CA
Posts: 510
Re: Installed PHP Spacer, Now Check Engine Light!

by battery disconnect or...?
__________________
2003 Azure Blue Mach 1 w/ IUP
http://www.youtube.com/watch?v=0_zD6QnuMPE
Joined the 12 Second Club on 5-15-08!
JLT RAI, PHP Spacer
Magnaflow Catback, SLP X-Pipe
MGW Shifter, Centerforce Dual Friction, Fidanza Flywheel, Fiores Quadrant and Adjuster
Nitto 315/35/17 DR's, 10th Ann. Cobra Wheels
FRPP 4.10's, Strange 31 Spline Axles, Auburn ECTED Carrier
SCT XCal2, Dyno Tune from AED.
302whp,326wtq
Mods Coming Soon:
Thinking about an Eaton Swap...
o3BlueMach1 is offline   Reply With Quote
Old 06-20-2006, 07:58 PM   #9
birdman941
Torque wins!
 
birdman941's Avatar
 
Join Date: Dec 2004
Location: Florida
Posts: 13,167
Re: Installed PHP Spacer, Now Check Engine Light!

Quote:
Originally Posted by o3BlueMach1
by battery disconnect or...?
yep.
__________________
The ORIGINAL Project R build thread is back !

5.4 32V NA
Streetable 404/387 26.56 MPG


"I don't like repeat offenders,
I like DEAD offenders" Ted Nugent

"A big engine hardly working is more efficient
than a little engine screaming its head off" Jay Leno
birdman941 is offline   Reply With Quote
Old 06-20-2006, 08:01 PM   #10
PeeDeeMACH
Registered User
 
PeeDeeMACH's Avatar
 
Join Date: Sep 2004
Posts: 186
Re: Installed PHP Spacer, Now Check Engine Light!

Intake air leak downstream of MAF. Something is loose or the gasket is torn.
PeeDeeMACH is offline   Reply With Quote
Old 06-20-2006, 08:05 PM   #11
o3BlueMach1
Registered User
 
Join Date: Feb 2006
Location: Fairfield, CA
Posts: 510
Re: Installed PHP Spacer, Now Check Engine Light!

ok.... i reset the battery and drove around..... back to ~0% fuel trim at idle
woot
__________________
2003 Azure Blue Mach 1 w/ IUP
http://www.youtube.com/watch?v=0_zD6QnuMPE
Joined the 12 Second Club on 5-15-08!
JLT RAI, PHP Spacer
Magnaflow Catback, SLP X-Pipe
MGW Shifter, Centerforce Dual Friction, Fidanza Flywheel, Fiores Quadrant and Adjuster
Nitto 315/35/17 DR's, 10th Ann. Cobra Wheels
FRPP 4.10's, Strange 31 Spline Axles, Auburn ECTED Carrier
SCT XCal2, Dyno Tune from AED.
302whp,326wtq
Mods Coming Soon:
Thinking about an Eaton Swap...
o3BlueMach1 is offline   Reply With Quote
Old 06-20-2006, 08:07 PM   #12
Mark04Mach1
No mames....
 
Mark04Mach1's Avatar
 
Join Date: May 2006
Location: Del Rio, Texas
Posts: 2,449
Re: Installed PHP Spacer, Now Check Engine Light!

Nice!
__________________
sold all my cars..
Mark04Mach1 is offline   Reply With Quote
Old 06-20-2006, 08:11 PM   #13
o3BlueMach1
Registered User
 
Join Date: Feb 2006
Location: Fairfield, CA
Posts: 510
Re: Installed PHP Spacer, Now Check Engine Light!

guess i'll change my sig now lol...
__________________
2003 Azure Blue Mach 1 w/ IUP
http://www.youtube.com/watch?v=0_zD6QnuMPE
Joined the 12 Second Club on 5-15-08!
JLT RAI, PHP Spacer
Magnaflow Catback, SLP X-Pipe
MGW Shifter, Centerforce Dual Friction, Fidanza Flywheel, Fiores Quadrant and Adjuster
Nitto 315/35/17 DR's, 10th Ann. Cobra Wheels
FRPP 4.10's, Strange 31 Spline Axles, Auburn ECTED Carrier
SCT XCal2, Dyno Tune from AED.
302whp,326wtq
Mods Coming Soon:
Thinking about an Eaton Swap...
o3BlueMach1 is offline   Reply With Quote
Old 06-20-2006, 08:43 PM   #14
birdman941
Torque wins!
 
birdman941's Avatar
 
Join Date: Dec 2004
Location: Florida
Posts: 13,167
Re: Installed PHP Spacer, Now Check Engine Light!

So, how ya like da spacer?
__________________
The ORIGINAL Project R build thread is back !

5.4 32V NA
Streetable 404/387 26.56 MPG


"I don't like repeat offenders,
I like DEAD offenders" Ted Nugent

"A big engine hardly working is more efficient
than a little engine screaming its head off" Jay Leno
birdman941 is offline   Reply With Quote
Old 06-20-2006, 08:49 PM   #15
Blk2k4Mach
Speed or Comfort?
 
Blk2k4Mach's Avatar
 
Join Date: Jan 2005
Location: Indianapolis, IN
Posts: 483
Re: Installed PHP Spacer, Now Check Engine Light!

It will give you an extra mph or 2 in the quarter. believe me...
__________________
Black 2004 Mach 1
  • K&N Air Filter
  • H&R Super Sport Springs
  • UPR Off Road X-Pipe
  • SLP LOUDMOUTH Catback
  • Pro 5.0 Shifter
  • UPR Clutch Cable
  • UPR Clutch Quadrant
  • UPR Firewall Adjuster
  • PHP Intake Spacer
  • 4:10 Gears
  • Kenny Brown Strut Tower Brace
Best 1/4: 13.32 @ 106

My Mach and the other cars at cardomain.com
Blk2k4Mach is offline   Reply With Quote
Old 06-20-2006, 08:57 PM   #16
birdman941
Torque wins!
 
birdman941's Avatar
 
Join Date: Dec 2004
Location: Florida
Posts: 13,167
Re: Installed PHP Spacer, Now Check Engine Light!

Took mine on a 200 mile trip today on the interstate.
Definitely felt stronger midrange,
and throttle response was better when I "hit it" at speed.
__________________
The ORIGINAL Project R build thread is back !

5.4 32V NA
Streetable 404/387 26.56 MPG


"I don't like repeat offenders,
I like DEAD offenders" Ted Nugent

"A big engine hardly working is more efficient
than a little engine screaming its head off" Jay Leno
birdman941 is offline   Reply With Quote
Old 06-20-2006, 09:06 PM   #17
Mach 1 Fireman
I had a nice Mach 1 once.
 
Mach 1 Fireman's Avatar
 
Join Date: Jun 2005
Location: Temple, Ga......
Posts: 1,614
Re: Installed PHP Spacer, Now Check Engine Light!

Since this is the closest spacer thread I can find, I have a question. I just ordered mine yesterday. Anyone have one on an auto Mach, and if yes, does it help?
Mach 1 Fireman is offline   Reply With Quote
Old 06-20-2006, 09:41 PM   #18
o3BlueMach1
Registered User
 
Join Date: Feb 2006
Location: Fairfield, CA
Posts: 510
Re: Installed PHP Spacer, Now Check Engine Light!

loving the spacer... but I think I love my car even more after my O/R prochamber and tune....

Don't see why it wouldn't help in an auto mach... I'd go for it!
__________________
2003 Azure Blue Mach 1 w/ IUP
http://www.youtube.com/watch?v=0_zD6QnuMPE
Joined the 12 Second Club on 5-15-08!
JLT RAI, PHP Spacer
Magnaflow Catback, SLP X-Pipe
MGW Shifter, Centerforce Dual Friction, Fidanza Flywheel, Fiores Quadrant and Adjuster
Nitto 315/35/17 DR's, 10th Ann. Cobra Wheels
FRPP 4.10's, Strange 31 Spline Axles, Auburn ECTED Carrier
SCT XCal2, Dyno Tune from AED.
302whp,326wtq
Mods Coming Soon:
Thinking about an Eaton Swap...
o3BlueMach1 is offline   Reply With Quote
Old 06-20-2006, 09:43 PM   #19
birdman941
Torque wins!
 
birdman941's Avatar
 
Join Date: Dec 2004
Location: Florida
Posts: 13,167
Re: Installed PHP Spacer, Now Check Engine Light!

It "should" work.
Can't think of a reason why it wouldn't.
__________________
The ORIGINAL Project R build thread is back !

5.4 32V NA
Streetable 404/387 26.56 MPG


"I don't like repeat offenders,
I like DEAD offenders" Ted Nugent

"A big engine hardly working is more efficient
than a little engine screaming its head off" Jay Leno
birdman941 is offline   Reply With Quote
Old 06-20-2006, 09:46 PM   #20
Mach 1 Fireman
I had a nice Mach 1 once.
 
Mach 1 Fireman's Avatar
 
Join Date: Jun 2005
Location: Temple, Ga......
Posts: 1,614
Re: Installed PHP Spacer, Now Check Engine Light!

Good thing. Like I said, I ordered it yesterday
Mach 1 Fireman is offline   Reply With Quote
Old 06-20-2006, 10:16 PM   #21
YellowMenace
Registered User
 
YellowMenace's Avatar
 
Join Date: Nov 2003
Location: Schertz, TX
Posts: 2,639
Re: Installed PHP Spacer, Now Check Engine Light!

Sorry. Won't work on a blue auto.
__________________
Zinc yellow NMRA Factory Stock configuration Coyote 5.0 engine, FRPP Control Pack and a bunch of other stuff. Best ET in this configuration 10.693@123
YellowMenace is offline   Reply With Quote
Old 06-20-2006, 10:48 PM   #22
Mach 1 Fireman
I had a nice Mach 1 once.
 
Mach 1 Fireman's Avatar
 
Join Date: Jun 2005
Location: Temple, Ga......
Posts: 1,614
Re: Installed PHP Spacer, Now Check Engine Light!

Quote:
Originally Posted by YellowMenace
Sorry. Won't work on a blue auto.

Only works on Yellow ones huh?


















Mach 1 Fireman is offline   Reply With Quote
Old 06-21-2006, 12:14 AM   #23
ponygt65
Registered User
 
ponygt65's Avatar
 
Join Date: Jun 2004
Location: Madera, CA
Posts: 7,687
Re: Installed PHP Spacer, Now Check Engine Light!

Quote:
Originally Posted by YellowMenace
Sorry. Won't work on a blue auto.

HA HA...that's funny.

Actually, it won't work on an auto. The inferior crank can't handle the extra TQ. Didn' you hear??....M5s only...they sent a memo out.







Just playing.
__________________
Current Stable:
NO stangs.....DON'T F'ING remind me.

Previous stangs:
2003 Mineral Grey Cobra Vert
1965 Factory GT K Code Coupe - mostly original and numbers matching. 14.9 (best) GONE BUT NOT FORGOTTEN!!
2003 MACh 1 AB - MINE!..SLP LM1s, PHP Spacer, and a CAI, that wont' stop whistling.
2004 MACh 1 DSG - PHP spacer, BOrla Stingers, K and N CAI, Tune, X-pipe, 1" 1-piece raised shaker...yadda yadda.
ponygt65 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:29 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<