Centerline telestars? - 2003-04 Mach 1 Registry Owners Club

3150Mach1 · 02-26-2006, 08:09 AM

I think I might have a wheel choosen to mount MT 15" drag radials. I like the look of this Centerline Telestar.

REARS:
Wheel, Telstar, Aluminum, Polished, 15 in. x 8 in., 5 x 4.5 in. Bolt Circle, 5.5 in. Backspace, Each $135.88

Tire, MTT-3753R, ET Street, P 275 /50R15, Radial, Steel-Belted, R1 Compound, Blackwall, Each $150.95

FRONTS:
Wheel, Telstar, Aluminum, Polished, 15 in. x 4 in., 5 x 4.5 in. Bolt Circle, 1.625 in. Backspace, Each $119.95

Tire, 185/65R15 tire, AVID H4/V4,Radial, DOT- Approved, H Speed Rated, Blackwall, Each $47.50

LUGNUTS:
CLL-L5300, Conical Seat, 1/2 in. x 20 RH, Closed End, Chrome Plated Steel, Set of 5 $10.39

I would get the wheels, tires and lug nuts through Summit. Have a $10.00 off coupon so bascially the catalog prices are my delivered prices if I get everything all at once.

Can I get this stuff anycheaper anywhere eles??

Linumup · 02-26-2006, 09:11 AM

Im looking into drag pkg. my self . Im pretty sure im going to run something much larger in the rear that i have now . Looks like i will have my buddys body shop roll the fenders minimum but chk. what is involved in tubbing . Its always something , not sure what im going to do yet . I have to figure it out quickly ! I think that Mach Ran is looking for a new setup as well . I think there is a company here locally that handles this . Ill have to get in contact with him .

3150Mach1 · 02-26-2006, 02:30 PM

Quote:

Originally Posted by linemup

Im looking into drag pkg. my self . Im pretty sure im going to run something much larger in the rear that i have now . Looks like i will have my buddys body shop roll the fenders minimum but chk. what is involved in tubbing . Its always something , not sure what im going to do yet . I have to figure it out quickly ! I think that Mach Ran is looking for a new setup as well . I think there is a company here locally that handles this . Ill have to get in contact with him .

I don't want to roll fenders or grind brake rotors and I am told the above combo will work with no modifications.

Linumup · 02-26-2006, 02:33 PM

Quote:

Originally Posted by 03Mach150BP

I don't want to roll fenders or grind brake rotors and I am told the above combo will work with no modifications.

I would never grind my brake motors . Just switch to GT backplates ! Thats the trick ! For you that is ! LOL

Me on the other hand i need lots of rubber on the ground . I mean that !

3150Mach1 · 02-27-2006, 04:32 PM

Quote:

Originally Posted by 03Mach150BP

I think I might have a wheel choosen to mount MT 15" drag radials. I like the look of this Centerline Telestar.

REARS:
Wheel, Telstar, Aluminum, Polished, 15 in. x 8 in., 5 x 4.5 in. Bolt Circle, 5.5 in. Backspace, Each $135.88

Tire, MTT-3753R, ET Street, P 275 /50R15, Radial, Steel-Belted, R1 Compound, Blackwall, Each $150.95

FRONTS:
Wheel, Telstar, Aluminum, Polished, 15 in. x 4 in., 5 x 4.5 in. Bolt Circle, 1.625 in. Backspace, Each $119.95

Tire, 185/65R15 tire, AVID H4/V4,Radial, DOT- Approved, H Speed Rated, Blackwall, Each $47.50

LUGNUTS:
CLL-L5300, Conical Seat, 1/2 in. x 20 RH, Closed End, Chrome Plated Steel, Set of 5 $10.39

I would get the wheels, tires and lug nuts through Summit. Have a $10.00 off coupon so bascially the catalog prices are my delivered prices if I get everything all at once.

Can I get this stuff anycheaper anywhere eles??

Updated for 4 tires, wheels and lug nuts. Comments???
I should look like the pictures in the below thread.

http://www.mach1registry.org/forums/...ad.php?t=38547

Linumup · 02-27-2006, 04:37 PM

Quote:

Originally Posted by 03Mach150BP

Updated for 4 tires, wheels and lug nuts. Comments???
I should look like the pictures in the below thread.

http://www.mach1registry.org/forums/...ad.php?t=38547

Looks good ! But i think im gonna need something a little larger .

Marks04DSG · 02-27-2006, 08:51 PM

Quote:

Originally Posted by 03Mach150BP

Updated for 4 tires, wheels and lug nuts. Comments???
I should look like the pictures in the below thread.

http://www.mach1registry.org/forums/...ad.php?t=38547

Man that looks kick*** Even if it wasn't slammed as much it would still look great and oldschool at the same time.

Hey "linemup" how many rwhorsies is that beast of yours anyway?

1WiCKEDMach · 03-06-2006, 02:26 AM

I have the 15X8 5.0BS Centerline Telestar wheels with 275/50 mickey drag radials mounted on them and i did have to slightly grind the top of the caliper. The good news is the tires hooked like glue. The bad is my clutch didnt lol

gfong · 03-06-2006, 08:52 AM

Quote:

Originally Posted by 03Mach150BP

Updated for 4 tires, wheels and lug nuts. Comments???
I should look like the pictures in the below thread.

http://www.mach1registry.org/forums/...ad.php?t=38547

Your fronts could be a better size as that combo is smaller. You would be better suited running a 165/80/15. Now if the tire just reads 165/15 the 80 is implied on 99.9 % of the tires.
There is nothing wrong with the other guys size it is just not as close to the stock height as the 165/80's are.

02-26-2006, 08:09 AM	#1
3150Mach1 Love my Mach Join Date: Apr 2005 Location: Charlottesville, VA Posts: 13,678	Centerline telestars? I think I might have a wheel choosen to mount MT 15" drag radials. I like the look of this Centerline Telestar. REARS: Wheel, Telstar, Aluminum, Polished, 15 in. x 8 in., 5 x 4.5 in. Bolt Circle, 5.5 in. Backspace, Each $135.88 Tire, MTT-3753R, ET Street, P 275 /50R15, Radial, Steel-Belted, R1 Compound, Blackwall, Each $150.95 FRONTS: Wheel, Telstar, Aluminum, Polished, 15 in. x 4 in., 5 x 4.5 in. Bolt Circle, 1.625 in. Backspace, Each $119.95 Tire, 185/65R15 tire, AVID H4/V4,Radial, DOT- Approved, H Speed Rated, Blackwall, Each $47.50 LUGNUTS: CLL-L5300, Conical Seat, 1/2 in. x 20 RH, Closed End, Chrome Plated Steel, Set of 5 $10.39 I would get the wheels, tires and lug nuts through Summit. Have a $10.00 off coupon so bascially the catalog prices are my delivered prices if I get everything all at once. Can I get this stuff anycheaper anywhere eles?? Attached Thumbnails __________________ 2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt Last edited by 3150Mach1; 02-27-2006 at 04:28 PM.

02-26-2006, 09:11 AM	#2
Linumup Registered User Join Date: Sep 2005 Location: Hydes Md. Posts: 6,944	Re: Centerline telestars? Im looking into drag pkg. my self . Im pretty sure im going to run something much larger in the rear that i have now . Looks like i will have my buddys body shop roll the fenders minimum but chk. what is involved in tubbing . Its always something , not sure what im going to do yet . I have to figure it out quickly ! I think that Mach Ran is looking for a new setup as well . I think there is a company here locally that handles this . Ill have to get in contact with him . __________________ 1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING

03-06-2006, 02:26 AM	#8
1WiCKEDMach Registered User Join Date: Jan 2004 Location: Union City Ca Posts: 860	Re: Centerline telestars? I have the 15X8 5.0BS Centerline Telestar wheels with 275/50 mickey drag radials mounted on them and i did have to slightly grind the top of the caliper. The good news is the tires hooked like glue. The bad is my clutch didnt lol __________________ 2003 Torch Red Mach 1, K&N, 99 cobra intake, Magnaflows, MRT Black Tips, UPR quadrant & Firewall adjuster, tokico Illuminas H&R Supersports MM panhard rod, CCplates, Hawk Pads, Slotted/Drilled Rotors, SLP Xpipe, 4.10s, 31spline Moser axles, 31spline traction Lock, Black DD 18x9&10x10 FR500 Wheels, Bridgestone Pole Position Tires. 12.9@105mph 1.88 60ftVid of 12.9 Pass 308.8rwhp 323rwtq SAE Other Stangs: 1992 Lx 5.0 Vert 1966 Mustang

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)