|
12-25-2005, 07:01 PM | #26 |
On the aftermarket trail
Join Date: Nov 2004
Location: Pleasant Grove, UT
Posts: 2,588
|
Re: 03/04 Cobra rims on Mach 1
hey any pictures of the yellow gt?
__________________
Rock out with your Mach out! Hang out with you Stang out! 2005 Mustang Gt * 20" wheels * Flowmaster Axel Back Exhaust * K&N CAI Intake * SCT custom tune * Pypes X-Pipe * Shaker 1000 audio system 2004 White Mach 1 * Super Forty Flowmaster Mufflers * Bassani On/Off road X-pipe * Air Silencer Removed * K&N Drop in Filter |
01-02-2006, 04:09 AM | #27 |
Macher
Join Date: Jun 2005
Location: Independence, MO
Posts: 144
|
Re: 03/04 Cobra rims on Mach 1
Top Pic is lowered with H&R Super Sports Rest are stock ride height
__________________
DSG 5 spd K&N Flowmaster's |
01-02-2006, 09:18 AM | #28 | |
Semper Fi
Join Date: Oct 2002
Location: San Marcos, CA
Posts: 110
|
Re: 03/04 Cobra rims on Mach 1
Quote:
I totally agree! I am running the BFGoodrich KDW 255/45/17s on mine, and it does look more complete. The wheel that is.
__________________
2003 Mach 1 - White, 5spd, IUP 4.30's, JLT CAI, MRT H, SLP LM2, PHP, alum d/s, XCal2 tuned... 286/315 1996 Cobra - Laser Red, 273/272 - proudly owned now by my father. |
|
01-02-2006, 09:27 AM | #29 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: 03/04 Cobra rims on Mach 1
Is this what you looking for . http://www.mach1registry.org/forums/...hmentid=16242r .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
01-02-2006, 06:10 PM | #30 | ||
User Registered
Join Date: Sep 2005
Location: California
Posts: 457
|
Re: 03/04 Cobra rims on Mach 1
Quote:
Quote:
Well I haven't bought anything yet, and I'm leaning on saving dollars and staying stock. I originally stated that I had seen a few GT's with R's that looked good, but I've also now seen many that look pretty ugly too.
__________________
03' DSG Mustang Mach 1 (5spd w/ IUP) Da' Mods: 95' Cobra R's, Polished Shaker, Tri-Ax Shifter, Fiore Quadrant & FWA, K&N FIPK, FRPP 'C' Springs, MM C/C Plates, Tokico HP's, Steeda STB, MM K-Member Brace, MM Rear Swaybar, Steeda Front Swaybar & shortened end-links, Kenny Brown Subframes, JLT PCV Pre-Filter, Poly Rack Bushings, Welded Torque Boxes Previous Stang's: 00' Laser Red Mustang GT 89' Dark Blue Mustang GT (9psi KB) 89' Black Mustang LX (2.3L) |
||
01-02-2006, 06:53 PM | #31 |
On the aftermarket trail
Join Date: Nov 2004
Location: Pleasant Grove, UT
Posts: 2,588
|
Re: 03/04 Cobra rims on Mach 1
Man I like that grey cars wheels. that is the stock 03-04 and if I am not mistaken the wheels are only one inch wider right? That one inch made a huge difference. I like a tire in the rear that sits out farther.
__________________
Rock out with your Mach out! Hang out with you Stang out! 2005 Mustang Gt * 20" wheels * Flowmaster Axel Back Exhaust * K&N CAI Intake * SCT custom tune * Pypes X-Pipe * Shaker 1000 audio system 2004 White Mach 1 * Super Forty Flowmaster Mufflers * Bassani On/Off road X-pipe * Air Silencer Removed * K&N Drop in Filter |
01-02-2006, 07:06 PM | #32 |
On the aftermarket trail
Join Date: Nov 2004
Location: Pleasant Grove, UT
Posts: 2,588
|
Re: 03/04 Cobra rims on Mach 1
**** I think I have to have those wheels. I just saw the four pictures up top.
__________________
Rock out with your Mach out! Hang out with you Stang out! 2005 Mustang Gt * 20" wheels * Flowmaster Axel Back Exhaust * K&N CAI Intake * SCT custom tune * Pypes X-Pipe * Shaker 1000 audio system 2004 White Mach 1 * Super Forty Flowmaster Mufflers * Bassani On/Off road X-pipe * Air Silencer Removed * K&N Drop in Filter |
01-03-2006, 12:55 PM | #33 | |
User Registered
Join Date: Sep 2005
Location: California
Posts: 457
|
Re: 03/04 Cobra rims on Mach 1
Quote:
__________________
03' DSG Mustang Mach 1 (5spd w/ IUP) Da' Mods: 95' Cobra R's, Polished Shaker, Tri-Ax Shifter, Fiore Quadrant & FWA, K&N FIPK, FRPP 'C' Springs, MM C/C Plates, Tokico HP's, Steeda STB, MM K-Member Brace, MM Rear Swaybar, Steeda Front Swaybar & shortened end-links, Kenny Brown Subframes, JLT PCV Pre-Filter, Poly Rack Bushings, Welded Torque Boxes Previous Stang's: 00' Laser Red Mustang GT 89' Dark Blue Mustang GT (9psi KB) 89' Black Mustang LX (2.3L) |
|
01-03-2006, 05:13 PM | #34 |
On the aftermarket trail
Join Date: Nov 2004
Location: Pleasant Grove, UT
Posts: 2,588
|
Re: 03/04 Cobra rims on Mach 1
Yeah that made a huge difference. Sweet looking rims.
__________________
Rock out with your Mach out! Hang out with you Stang out! 2005 Mustang Gt * 20" wheels * Flowmaster Axel Back Exhaust * K&N CAI Intake * SCT custom tune * Pypes X-Pipe * Shaker 1000 audio system 2004 White Mach 1 * Super Forty Flowmaster Mufflers * Bassani On/Off road X-pipe * Air Silencer Removed * K&N Drop in Filter |
01-03-2006, 05:36 PM | #35 | |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: 03/04 Cobra rims on Mach 1
Quote:
Tires mounted and almost on the ground . The car is going to be detailed on Thurs .. It will look lowered and clean then .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
|
01-03-2006, 06:21 PM | #36 |
On the aftermarket trail
Join Date: Nov 2004
Location: Pleasant Grove, UT
Posts: 2,588
|
Re: 03/04 Cobra rims on Mach 1
Yeah I like those rims as well. I just need wider rims if I keep the car.
__________________
Rock out with your Mach out! Hang out with you Stang out! 2005 Mustang Gt * 20" wheels * Flowmaster Axel Back Exhaust * K&N CAI Intake * SCT custom tune * Pypes X-Pipe * Shaker 1000 audio system 2004 White Mach 1 * Super Forty Flowmaster Mufflers * Bassani On/Off road X-pipe * Air Silencer Removed * K&N Drop in Filter |
01-03-2006, 06:26 PM | #37 | |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: 03/04 Cobra rims on Mach 1
Quote:
How wide are you looking to go . I have 17x9s in the front and 17x10.5 in the rear . As it was i had to flip the 2nd set of shocks in the rear to make the 315,s work . Basically turned them upside down .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
|
01-03-2006, 06:46 PM | #38 | |
User Registered
Join Date: Sep 2005
Location: California
Posts: 457
|
Re: 03/04 Cobra rims on Mach 1
Quote:
__________________
03' DSG Mustang Mach 1 (5spd w/ IUP) Da' Mods: 95' Cobra R's, Polished Shaker, Tri-Ax Shifter, Fiore Quadrant & FWA, K&N FIPK, FRPP 'C' Springs, MM C/C Plates, Tokico HP's, Steeda STB, MM K-Member Brace, MM Rear Swaybar, Steeda Front Swaybar & shortened end-links, Kenny Brown Subframes, JLT PCV Pre-Filter, Poly Rack Bushings, Welded Torque Boxes Previous Stang's: 00' Laser Red Mustang GT 89' Dark Blue Mustang GT (9psi KB) 89' Black Mustang LX (2.3L) |
|
01-03-2006, 06:50 PM | #39 | |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: 03/04 Cobra rims on Mach 1
Quote:
Go into my threads 03Mach1 Re-build FR500 Pkg. and 03Mach1 Re-build tranny and rear . Complete build-up start to finish . Except if you need KB Bap/wire mod . Lots to look at . Enjoy
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
|
01-03-2006, 06:57 PM | #40 |
On the aftermarket trail
Join Date: Nov 2004
Location: Pleasant Grove, UT
Posts: 2,588
|
Re: 03/04 Cobra rims on Mach 1
I would like 10.5 but might just settle for 9's with a spacer. I just want the rear wheel to line up with the fender.
__________________
Rock out with your Mach out! Hang out with you Stang out! 2005 Mustang Gt * 20" wheels * Flowmaster Axel Back Exhaust * K&N CAI Intake * SCT custom tune * Pypes X-Pipe * Shaker 1000 audio system 2004 White Mach 1 * Super Forty Flowmaster Mufflers * Bassani On/Off road X-pipe * Air Silencer Removed * K&N Drop in Filter |
01-03-2006, 07:10 PM | #41 | |
User Registered
Join Date: Sep 2005
Location: California
Posts: 457
|
Re: 03/04 Cobra rims on Mach 1
Quote:
__________________
03' DSG Mustang Mach 1 (5spd w/ IUP) Da' Mods: 95' Cobra R's, Polished Shaker, Tri-Ax Shifter, Fiore Quadrant & FWA, K&N FIPK, FRPP 'C' Springs, MM C/C Plates, Tokico HP's, Steeda STB, MM K-Member Brace, MM Rear Swaybar, Steeda Front Swaybar & shortened end-links, Kenny Brown Subframes, JLT PCV Pre-Filter, Poly Rack Bushings, Welded Torque Boxes Previous Stang's: 00' Laser Red Mustang GT 89' Dark Blue Mustang GT (9psi KB) 89' Black Mustang LX (2.3L) |
|
01-03-2006, 07:13 PM | #42 |
On the aftermarket trail
Join Date: Nov 2004
Location: Pleasant Grove, UT
Posts: 2,588
|
Re: 03/04 Cobra rims on Mach 1
Yeah if you got more pictures of the wheels post them if you can
__________________
Rock out with your Mach out! Hang out with you Stang out! 2005 Mustang Gt * 20" wheels * Flowmaster Axel Back Exhaust * K&N CAI Intake * SCT custom tune * Pypes X-Pipe * Shaker 1000 audio system 2004 White Mach 1 * Super Forty Flowmaster Mufflers * Bassani On/Off road X-pipe * Air Silencer Removed * K&N Drop in Filter |
01-03-2006, 07:16 PM | #43 | |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: 03/04 Cobra rims on Mach 1
Quote:
I guess you will have to wait until Thurs.. It will be cleaned and detailed . Thank goodness its beyond filthy . Im telling you that when you see this from the side and rear its breath taking . Im not just saying that because its my car . All the colors jump right out . The 315,s look awesome with all the rear and susp. mods. Really fills up the gap . Not that the brake kits dont hurt .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
|
01-03-2006, 11:16 PM | #44 |
Registered User
Join Date: Nov 2004
Location: woodstock ga
Posts: 19
|
Re: 03/04 Cobra rims on Mach 1
I have this set up and looks good sorrie no picks.
will try to post up tomarrow. |
01-04-2006, 11:12 PM | #45 |
Registered User
Join Date: Nov 2004
Location: woodstock ga
Posts: 19
|
Re: 03/04 Cobra rims on Mach 1
Just some picks
|
01-04-2006, 11:15 PM | #46 |
Registered User
Join Date: Nov 2004
Location: woodstock ga
Posts: 19
|
Re: 03/04 Cobra rims on Mach 1
Ok I will try this again DSG picks
|
01-06-2006, 08:15 PM | #47 |
On the aftermarket trail
Join Date: Nov 2004
Location: Pleasant Grove, UT
Posts: 2,588
|
Re: 03/04 Cobra rims on Mach 1
Man I like those wheels. Think I can get a package deal on them over the internet or something with tires for cheap?
__________________
Rock out with your Mach out! Hang out with you Stang out! 2005 Mustang Gt * 20" wheels * Flowmaster Axel Back Exhaust * K&N CAI Intake * SCT custom tune * Pypes X-Pipe * Shaker 1000 audio system 2004 White Mach 1 * Super Forty Flowmaster Mufflers * Bassani On/Off road X-pipe * Air Silencer Removed * K&N Drop in Filter |
01-07-2006, 02:03 PM | #48 | |
User Registered
Join Date: Sep 2005
Location: California
Posts: 457
|
Re: 03/04 Cobra rims on Mach 1
Quote:
__________________
03' DSG Mustang Mach 1 (5spd w/ IUP) Da' Mods: 95' Cobra R's, Polished Shaker, Tri-Ax Shifter, Fiore Quadrant & FWA, K&N FIPK, FRPP 'C' Springs, MM C/C Plates, Tokico HP's, Steeda STB, MM K-Member Brace, MM Rear Swaybar, Steeda Front Swaybar & shortened end-links, Kenny Brown Subframes, JLT PCV Pre-Filter, Poly Rack Bushings, Welded Torque Boxes Previous Stang's: 00' Laser Red Mustang GT 89' Dark Blue Mustang GT (9psi KB) 89' Black Mustang LX (2.3L) |
|
01-07-2006, 03:29 PM | #49 |
Registered User
Join Date: Nov 2004
Location: woodstock ga
Posts: 19
|
Re: 03/04 Cobra rims on Mach 1
thanks check ebay . I am about to get the 17x10.5 with 315s.
|
01-07-2006, 05:05 PM | #50 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: 03/04 Cobra rims on Mach 1
Here are a few pics ..
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|