|
|
General Registry Discussion Topics of Interest (Mach 1 Related or otherwise) for discussions that don't fit other forums. |
|
Thread Tools | Display Modes |
01-22-2005, 09:27 PM | #1 |
Guest
Join Date: Jan 2005
Posts: 17
|
Introduction
Hey Guys, just wanted to introduce myself. I do not own a mach (03 cobra guy), however I am in love with them. These vehicles are animals and have tons of potential.
I have been a long time lurker of the board and finally decided it was time to join, chat with everyone and help out as much as possible if needed Some Toronto and Canadian members already know me (you guys can skip this) and to the others I just wanted to introduce myself. My name is Paul Meister, I do all of the tuning at Steeda.ca in Toronto, Ontario Canada, help out with sales and other misc. stuff. Most people call me meister (you all can if you wish) Keep enjoying those monsters |
01-22-2005, 09:50 PM | #2 | |
Greg Fonger
Join Date: May 2004
Location: Ontario, Canada
Posts: 3,416
|
Re: Introduction
Quote:
Welcome aboard, quit following me. lol Not to promote but this is where I have got all my parts. More parts on the horizon. Now I just have to learn to drive it. |
|
01-22-2005, 10:16 PM | #3 |
Registered User
Join Date: Oct 2003
Location: Colorado
Posts: 204
|
Re: Introduction
Yeah that is also where i got my parts ...... Paul is goin to be tuning my car this spring cause i got a procharger goin on it
|
01-22-2005, 10:28 PM | #4 | |
Greg Fonger
Join Date: May 2004
Location: Ontario, Canada
Posts: 3,416
|
Re: Introduction
Quote:
I have never met Paul, sounds like a good dude. Hope that Pro charger works out for ya. |
|
01-22-2005, 11:02 PM | #5 |
Guest
Join Date: Jan 2005
Posts: 17
|
Re: Introduction
It is Meister, like Shyster and the copy meister from SNL :-)
Thanks for the kind words...derricks mach will be a fun car to tune...and the trip to NS will be wicked! |
01-22-2005, 11:07 PM | #6 |
Registered User
Join Date: Oct 2003
Location: Colorado
Posts: 204
|
Re: Introduction
Did ya see the pics of it yet?
|
01-22-2005, 11:43 PM | #7 | |
Greg Fonger
Join Date: May 2004
Location: Ontario, Canada
Posts: 3,416
|
Re: Introduction
Quote:
|
|
01-22-2005, 11:48 PM | #8 |
Guest
Join Date: Jan 2005
Posts: 17
|
Re: Introduction
It's ok.....i don't mind you stealing my post....I will get you when you stop in next ;-)
|
01-23-2005, 12:16 AM | #9 |
LuLz
Join Date: Dec 2003
Location: Cedar Park, TX
Posts: 19,294
|
Re: Introduction
welcome
__________________
11 Sterling gray GT500 coupe 08 Silver Z06 1058rwhp/1073rwt @ 15psi 14 Silver Q50S Vortech blown 04 DSG Mach 1 (stolen) 03 OW Mach 1 (sitting in a field rotting away) |
01-23-2005, 01:28 AM | #10 |
Super Moderator
Join Date: Sep 2003
Location: Houston (Crosby), Texas
Posts: 6,689
|
Re: Introduction
Glad you're here. Welcome to the Registry!!
__________________
2003 Dark Shadow Gray Mach 1 5.3L Stroker - FR500 Intake - Boss330 Heads 4.56 Gears - Kooks LTs - SCT Tune - Bassani X/Catback 2004 Silver Metallic Cobra 2.3 Whipple - 60lb injectors -Twin FGT Pumps 8 gauge/BAP/FPDM - JLT - Bassani Catted X / Catback - SCT PRP - 4# Lower - 3.50/3.00 Uppers - 19/24 PSI 2017 White Shelby F150 2.9L Whipple _______________ |
01-23-2005, 12:25 PM | #11 |
Guest
Join Date: Jan 2005
Posts: 17
|
Re: Introduction
Thank's again for the warm welcome
|
01-23-2005, 12:29 PM | #12 | |
USCG
Join Date: Oct 2004
Location: New York
Posts: 1,458
|
Re: Introduction
Quote:
__________________
2004 Oxford White Mach1 M6 IUP "SHKR281" Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the outcome of the vote. -Benjamin Franklin |
|
01-23-2005, 06:14 PM | #13 | |
300 club member :)
Join Date: Jul 2004
Location: GTA, ON, Canada
Posts: 338
|
Re: Introduction
Quote:
__________________
2004 Mach 1 - Torch Red - 301rwhp/324rwtq - Magnapacks, catted MRT H-Pipe, Steeda CAI, Ported/polished U/L intake, PHP Intake spacer, custom sct tune - H&R SS Springs, Tokico 5-way adjust. struts/shocks - FRPP 31 spline diff, 4.10's, Strange axles, FRPP axle girdle - Rotorpros slotted/dimpled rotors - Raptor shift light - Custom in-dash 1ghz computer setup w/7" lcd - AFS Black Chrome Mach1 wheels, 17x9 & 17x10.5 - Goodyear Eagle F1 GS-D3, 275/40/17 up front, 315/35/17 out back |
|
01-23-2005, 06:49 PM | #14 |
Registered User
Join Date: Jan 2004
Location: Toronto,Ontario
Posts: 41
|
Re: Introduction
Hey Paul !
Talked to Pat on Sat. Looking at Subframe Connectors and CAI. How is your "Monster" ? |
01-23-2005, 08:42 PM | #15 |
certified MACH 1 nut
Join Date: Apr 2004
Location: nova scotia canada
Posts: 1,520
|
Re: Introduction
hi paul welcome aboard. by the way let me know when your coming east i would like to meet you i live 3 hours from derrick we have two 04 machs 1cy and 1cxbouth 5speeds:cheers:
__________________
shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq |
01-23-2005, 09:34 PM | #16 | |
Guest
Join Date: Jan 2005
Posts: 17
|
Re: Introduction
Quote:
|
|
01-24-2005, 04:26 PM | #17 |
certified MACH 1 nut
Join Date: Apr 2004
Location: nova scotia canada
Posts: 1,520
|
Re: Introduction
sound great we will be there with both bring some big goodys too i might have to get some thanks for the reply
__________________
shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|