03 Mach 1 Auto Dyno Numbers - 2003-04 Mach 1 Registry Owners Club

Red_89gt · 01-22-2016, 11:08 AM

I got the mach dyno'd last weekend it put down 297hp 287tq. It has Stainless works 1 5/8 by 3" long tubes off road pro chamber bassani cb K&N intake and 4.30 gears. Does this seem about right?. I thought it would be at least 300 and about the same torque. the car also has 169k on it. I know the auto robs more power. It was tuned at the same time. just wanted some opinions.

TKat13 · 01-22-2016, 11:13 AM

169k miles, auto, etc, it sounds pretty good to me.

Red_89gt · 01-22-2016, 11:18 AM

Ok just wasn't sure first 4v car for me. I have normally messed with pushrod cars. It runs good on the street and pulls hard the 4.30 gears and tune helped a lot. I did those two last at the same time.

bbford97 · 01-28-2016, 07:42 PM

sounds good. best bet would take it to the track, line up with some one who thinks they have 310 HP and listen to the stories why you beat them.

Red_89gt · 01-28-2016, 07:54 PM

Lol that was the plan I'm not chasing a dyno number. I'm more worried about how it runs at the track. It feels good on the street. Which is what matters. I pulled codes on it. It looks to have some lean codes. Our maybe codes for 02 not switching. I'm going to send a datalog to the tuner abd go from there.

01-22-2016, 11:08 AM	#1
Red_89gt Registered User Join Date: Jun 2015 Location: Miami OK Posts: 17	03 Mach 1 Auto Dyno Numbers I got the mach dyno'd last weekend it put down 297hp 287tq. It has Stainless works 1 5/8 by 3" long tubes off road pro chamber bassani cb K&N intake and 4.30 gears. Does this seem about right?. I thought it would be at least 300 and about the same torque. the car also has 169k on it. I know the auto robs more power. It was tuned at the same time. just wanted some opinions.

01-22-2016, 11:13 AM	#2
TKat13 Mach-T Join Date: Jun 2004 Location: DFW Posts: 2,865	Re: 03 Mach 1 Auto Dyno Numbers 169k miles, auto, etc, it sounds pretty good to me. __________________ Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 \| 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 \| 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP

01-22-2016, 11:18 AM	#3
Red_89gt Registered User Join Date: Jun 2015 Location: Miami OK Posts: 17	Re: 03 Mach 1 Auto Dyno Numbers Ok just wasn't sure first 4v car for me. I have normally messed with pushrod cars. It runs good on the street and pulls hard the 4.30 gears and tune helped a lot. I did those two last at the same time.

01-28-2016, 07:42 PM	#4
bbford97 Registered User Join Date: Mar 2007 Location: Ocala, Fl Posts: 230	Re: 03 Mach 1 Auto Dyno Numbers sounds good. best bet would take it to the track, line up with some one who thinks they have 310 HP and listen to the stories why you beat them. __________________ Auto, Kooks LT, O/R X, Borla cat back, JLT warm air, Rich's infamous air diverter with 164302 miles. Has seen rain wind and fire. boss 330 motor blew up less than 300 miles junk! Now have a MMR 5.0built April 2011 now have 65K milles turned 12.44@ 110 July 2013 , 12.66@111.10 April 2014 Thanks Mark.

01-28-2016, 07:54 PM	#5
Red_89gt Registered User Join Date: Jun 2015 Location: Miami OK Posts: 17	Re: 03 Mach 1 Auto Dyno Numbers Lol that was the plan I'm not chasing a dyno number. I'm more worried about how it runs at the track. It feels good on the street. Which is what matters. I pulled codes on it. It looks to have some lean codes. Our maybe codes for 02 not switching. I'm going to send a datalog to the tuner abd go from there.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)