|
12-27-2014, 09:46 AM | #1 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 323
|
Help me identify cams.
Hey guys I was wondering if you can help me identify a set of cams I have. I was told that they were out of a 98 cobra but I know that's not correct because the part numbers don't match. When I search I find mixed things online, either 01 cobra or 98 mark8.
Pn are yf3e 6a271 bb and 6a270bb Also have the gears and bolts attatched so I can measure them if they vary from year. The part number does not look stamped, it looks hand written, is this normal Thanks
__________________
2003 Mach 1- Azure Blue-Manual- Intake/exhaust/ 01 cobra cams/ NX wet kit- 351 rwhp 350 rwtq N/A- 460 rwhp 557 rwtq 100 shot. |
12-27-2014, 03:14 PM | #2 |
8LB YNER
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
|
Re: Help me identify cams.
__________________
Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12... |
12-27-2014, 03:55 PM | #3 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 323
|
Re: Help me identify cams.
That thread has contradicting info too, it says 01 cobra, then it says mark 8.
__________________
2003 Mach 1- Azure Blue-Manual- Intake/exhaust/ 01 cobra cams/ NX wet kit- 351 rwhp 350 rwtq N/A- 460 rwhp 557 rwtq 100 shot. |
12-28-2014, 09:53 AM | #4 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 323
|
Re: Help me identify cams.
I talked to the guy I got them from and he said 100% sure the motor came out of a 98 cobra. It had 9000 miles, he didn't know what all was done to it as he just wanted the block. I know he's no just yanking my chain because he said if they are not going to work he'll take them back. I have found a bunch more stuff online that says 01 cobra, and then some stuff that says not. Is there anything I could measure on them to differentiate them? Anyone to call?
Thanks, Dan
__________________
2003 Mach 1- Azure Blue-Manual- Intake/exhaust/ 01 cobra cams/ NX wet kit- 351 rwhp 350 rwtq N/A- 460 rwhp 557 rwtq 100 shot. |
12-28-2014, 11:56 AM | #5 |
Registered User
Join Date: Jan 2013
Location: San Diego, CA
Posts: 1,104
|
I think the 98 Cobra intake cams have one lobe bigger than the other. The bigger lobe is for when the IMRC opens.
__________________
New Ride: 2004 Mystichrome Cobra-Accufab SBTB and plenum, Steeda 2.8" upper, Bassani X, Borla Stingers, Mcleod RXT, MGW shifter, Level 5 halfshafts, chrome FR500's, Stiffler's FIT system and DS safety loop, GT pumps, BA3000, tuned by owner |
12-28-2014, 11:58 AM | #6 |
Dark Knight
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
|
Check my sticky in the engine section. I've got the part numbers and ways to identify them in the first post.
__________________
Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage |
12-28-2014, 12:10 PM | #7 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 323
|
Re: Help me identify cams.
I took them apart and took some pictures, now I just have to figure out how to post them, I looked through that thread and didn't see 99-01 part numbers, but measured the bolts and they are 10mm. I don't know enough about these to decider some of the other stuff talked about.
__________________
2003 Mach 1- Azure Blue-Manual- Intake/exhaust/ 01 cobra cams/ NX wet kit- 351 rwhp 350 rwtq N/A- 460 rwhp 557 rwtq 100 shot. |
12-29-2014, 10:48 AM | #8 |
Dark Knight
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
|
Re: Help me identify cams.
Ahh. Thought they were 96-98 cams. I don't have the part number for the 01s.
You have to host the pics on an external site and link them.
__________________
Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage |
12-29-2014, 12:09 PM | #9 |
Registered User
Join Date: Mar 2010
Location: Wyoming, MI
Posts: 425
|
Re: Help me identify cams.
According to NASVT's cam sticky here at M1R
2001 Cobra Int: 200 deg @.050/.39x” lift Right Int YF3E-6A270 Left Int YF3Z 6A271 Are they both YF3E or is the other YF3Z? If it's a Z they are 01 Cobra. They are the same numbers my 01 cams have.
__________________
SLP Long tubes and O/R X pipe, Magnaflow cat back, K&N CAI, PHP intake spacer, 01 Cobra intake cam, 4.10s |
12-29-2014, 03:36 PM | #10 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 323
|
Re: Help me identify cams.
__________________
2003 Mach 1- Azure Blue-Manual- Intake/exhaust/ 01 cobra cams/ NX wet kit- 351 rwhp 350 rwtq N/A- 460 rwhp 557 rwtq 100 shot. |
12-29-2014, 09:20 PM | #11 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 323
|
Re: Help me identify cams.
When i look at this thread on my phone it shows the pictures posted in post 10, but on the computer id doesnt, can anyone else see them?
__________________
2003 Mach 1- Azure Blue-Manual- Intake/exhaust/ 01 cobra cams/ NX wet kit- 351 rwhp 350 rwtq N/A- 460 rwhp 557 rwtq 100 shot. |
12-29-2014, 11:18 PM | #12 |
Registered User
Join Date: Jun 2008
Location: So Cal
Posts: 1,533
|
Re: Help me identify cams.
I see them!
__________________
2003 Black Mach 1 K&N RAI Magnaflow O/R X-pipe Mac catback t45 swap (BEST decision of my life!!!) Don't fear the gear! I'm not a real mechanic, I just play one online... |
01-01-2015, 05:13 AM | #13 |
4v>3v>2v
Join Date: Jun 2004
Location: Pacific Northwest
Posts: 727
|
Re: Help me identify cams.
The 10mm bolt tells you that they are 01+ cams. The part numbers indicate:
yf3e 6a270bb = 01 Cobra Right Intake Cam yf3e 6a271bb = 01 Cobra Left Intake Cam Only a couple degrees difference in duration so 01 Cams wont run any different than 96 -98's. I wouldn't worry about looking for 98's. EDIT: Fixed cam ID Last edited by tmhutch; 01-01-2015 at 11:20 PM. |
01-01-2015, 10:48 AM | #14 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 323
|
Re: Help me identify cams.
Thanks for the reply! He gave me the set of 4 with the gears on them and the exhaust( or do I though ) is pictured above. The part numbers for them are Yf3e 6a272 ab And Yf3e 6a273 ab
__________________
2003 Mach 1- Azure Blue-Manual- Intake/exhaust/ 01 cobra cams/ NX wet kit- 351 rwhp 350 rwtq N/A- 460 rwhp 557 rwtq 100 shot. |
01-01-2015, 11:20 PM | #15 |
4v>3v>2v
Join Date: Jun 2004
Location: Pacific Northwest
Posts: 727
|
Re: Help me identify cams.
I fixed my post because I messed up your cam ID. yf3e 6a270bb and yf3e 6a271bb are both intake cams.
|
01-02-2015, 08:02 AM | #16 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 323
|
Re: Help me identify cams.
Thanks! Obviously was interested in the small increase in hp, but the added rpm is what really made me want these.
__________________
2003 Mach 1- Azure Blue-Manual- Intake/exhaust/ 01 cobra cams/ NX wet kit- 351 rwhp 350 rwtq N/A- 460 rwhp 557 rwtq 100 shot. Last edited by 03machstock; 01-02-2015 at 09:19 AM. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|