FS: Misc parts - 2003-04 Mach 1 Registry Owners Club

97tbird · 10-16-2014, 09:19 PM

Located in Plainfield, IL
Everything is price + shipping & pp fees unless negotiated.
I have pics of almost everything listed, contact me for pics.

- 4.6 dohc aviator intake manifold "poor mans fr500". Complete... tb, fuel rail, injectors, etc SOLD

- dohc valve covers $100obo

- 4.6 dohc front cover 3 bolt tensioner $75obo

- 4.6 Balancer $30obo

- 4.6 6bolt flexplate. (Can be media blasted before sale) $50obo

- 4.6 dohc stock exhaust manifolds SOLD

- 4.6 oil pan $30obo

- oil filter/t-stat housing SOLD

- 4.6/5.4 dohc cam shafts SOLD

^All above parts are off of a 2005 lincoln aviator^

Only used the cooler and plate for about 100 miles. no issues with it, just changed my set up. All you need to complete the cooler set up is your desired length of -8 line and a few AN fittings.
- Canton oil cooler sandwich adapter. This fit the Motorcraft fl820 filter. Comes with two 1/2in npt to -8an fittings
SOLD
- Derale oil cooler. A couple of fins were bent. Doesn't effect the performance of it at all.
SOLD

- New UPR lower torque box kit, have all the hardware for it.SOLD

- NEW in package ford axle seals and bearings $20

- Stock 8.8 cover $10

- arp rod cap bolts. (16qty) Came off of manley H beam rods ~1000 miles
$50obo

- Stock upper control arms (40k) $15

- 28 spline trac-lok diff. Worked fine, wouldn't hurt to get it rebuilt (50k)
$50obo

- stock cross member for tr3650 $50obo

- stock Drive shaft for tr-3650 $50obo

- McLeod street pro clutch. 10k miles SOLD

- 03 Mach1 stock clutch/pressure plate, did not slip at all, (40k) $40obo

LOCAL PICK UP ONLY:

- 2 bfg g-force t/a kdws. Very low miles, no wear issues, no patches/plugs. I was going to put them on my stock rims but since then i've gotten different wheels for the car. SOLD

- tr-3650 out of my 03 mach1. Upgraded to a tko-600. It does have some gear clash noise but it doesn't pop out of gear, grind or anything else weird. It was rebuilt december 2013 at rod baker ford. Has maybe 10k miles on it since rebuild. I will find the paper work. $450obo

- 2 bfg drag radial's ( 315/35R17) They don't have much life left in them. SOLD

97tbird · 10-16-2014, 09:35 PM

austingreen1993 · 11-09-2014, 07:27 PM

Hey man do you still have the Intake if so will it work on an 03 Mach 1? Shoot me a text at 2512846880 anytime very interested

austingreen1993 · 11-09-2014, 07:33 PM

or message me at austingreen1993@yahoo.com

austingreen1993 · 11-09-2014, 08:31 PM

Hey man do you still have the Intake if so will it work on an 03 Mach 1? Shoot me a text at 2512846880 anytime very interested

VA-Mach1 · 11-09-2014, 09:11 PM

"can be"? Why not just do it to give the buyer more incentive to buy your stuff? Just saying

97tbird · 11-12-2014, 07:51 PM

Quote:

Originally Posted by VA-Mach1

"can be"? Why not just do it to give the buyer more incentive to buy your stuff? Just saying

Wut? Some people dont care. Sold some cams and a crank and the buyer didn't want them washed. Fine with me, not going to argue with him.

97tbird · 11-12-2014, 07:51 PM

Quote:

Originally Posted by austingreen1993

Hey man do you still have the Intake if so will it work on an 03 Mach 1? Shoot me a text at 2512846880 anytime very interested

PM sent. I dont check in here often but PM's show up in my email.

austingreen1993 · 11-12-2014, 08:01 PM

I need the crossmember for sure and i also need the pressure plate can you text or call me at 2512846880

frijol79 · 11-13-2014, 12:41 AM

Pm sent

1of956 · 12-14-2014, 02:45 PM

i will take the oil pan

97tbird · 01-20-2015, 10:53 PM

bump

Intake, exhaust manifolds, 1 set of tires sold.

AzAzure03 · 03-15-2015, 09:48 PM

Will the oil pan fit a Mach 1?

97tbird · 03-30-2015, 09:34 PM

If anyone has questions please PM me so I get an email notification. I hate browsing the forums on my phone.

Quote:

Originally Posted by AzAzure03

Will the oil pan fit a Mach 1?

Sorry, I just seen this. I am not sure if it will.

not a gt · 03-30-2015, 09:41 PM

How is the rubber looking on the uppers?? Pic?

97tbird · 03-31-2015, 08:32 AM

Quote:

Originally Posted by not a gt

How is the rubber looking on the uppers?? Pic?

Not terrible but they should be replaced IMO.

10-16-2014, 09:19 PM	#1
97tbird Registered User Join Date: Apr 2012 Location: Plainfield, IL Posts: 140	FS: Misc parts Located in Plainfield, IL Everything is price + shipping & pp fees unless negotiated. I have pics of almost everything listed, contact me for pics. - 4.6 dohc aviator intake manifold "poor mans fr500". Complete... tb, fuel rail, injectors, etc SOLD - dohc valve covers $100obo - 4.6 dohc front cover 3 bolt tensioner $75obo - 4.6 Balancer $30obo - 4.6 6bolt flexplate. (Can be media blasted before sale) $50obo - 4.6 dohc stock exhaust manifolds SOLD - 4.6 oil pan $30obo - oil filter/t-stat housing SOLD - 4.6/5.4 dohc cam shafts SOLD ^All above parts are off of a 2005 lincoln aviator^ Only used the cooler and plate for about 100 miles. no issues with it, just changed my set up. All you need to complete the cooler set up is your desired length of -8 line and a few AN fittings. - Canton oil cooler sandwich adapter. This fit the Motorcraft fl820 filter. Comes with two 1/2in npt to -8an fittings SOLD - Derale oil cooler. A couple of fins were bent. Doesn't effect the performance of it at all. SOLD - New UPR lower torque box kit, have all the hardware for it.SOLD - NEW in package ford axle seals and bearings $20 - Stock 8.8 cover $10 - arp rod cap bolts. (16qty) Came off of manley H beam rods ~1000 miles $50obo - Stock upper control arms (40k) $15 - 28 spline trac-lok diff. Worked fine, wouldn't hurt to get it rebuilt (50k) $50obo - stock cross member for tr3650 $50obo - stock Drive shaft for tr-3650 $50obo - McLeod street pro clutch. 10k miles SOLD - 03 Mach1 stock clutch/pressure plate, did not slip at all, (40k) $40obo LOCAL PICK UP ONLY: - 2 bfg g-force t/a kdws. Very low miles, no wear issues, no patches/plugs. I was going to put them on my stock rims but since then i've gotten different wheels for the car. SOLD - tr-3650 out of my 03 mach1. Upgraded to a tko-600. It does have some gear clash noise but it doesn't pop out of gear, grind or anything else weird. It was rebuilt december 2013 at rod baker ford. Has maybe 10k miles on it since rebuild. I will find the paper work. $450obo - 2 bfg drag radial's ( 315/35R17) They don't have much life left in them. SOLD __________________ 2003 MACH 1 1997 Thunderbird LX Last edited by 97tbird; 03-06-2015 at 12:23 AM.

10-16-2014, 09:35 PM	#2
97tbird Registered User Join Date: Apr 2012 Location: Plainfield, IL Posts: 140	Re: FS: Misc parts __________________ 2003 MACH 1 1997 Thunderbird LX Last edited by 97tbird; 02-02-2015 at 09:00 PM.

11-09-2014, 07:27 PM	#3
austingreen1993 Registered User Join Date: May 2014 Location: Gulf Shores, AL Posts: 25	Re: FS: Misc parts Hey man do you still have the Intake if so will it work on an 03 Mach 1? Shoot me a text at 2512846880 anytime very interested

11-09-2014, 07:33 PM	#4
austingreen1993 Registered User Join Date: May 2014 Location: Gulf Shores, AL Posts: 25	Re: FS: Misc parts or message me at austingreen1993@yahoo.com

11-09-2014, 08:31 PM	#5
austingreen1993 Registered User Join Date: May 2014 Location: Gulf Shores, AL Posts: 25	Re: FS: Misc parts Hey man do you still have the Intake if so will it work on an 03 Mach 1? Shoot me a text at 2512846880 anytime very interested

11-09-2014, 09:11 PM	#6
VA-Mach1 Mach & Cheese Join Date: Mar 2014 Location: Richmond VA Posts: 797	Re: FS: Misc parts "can be"? Why not just do it to give the buyer more incentive to buy your stuff? Just saying

11-12-2014, 08:01 PM	#9
austingreen1993 Registered User Join Date: May 2014 Location: Gulf Shores, AL Posts: 25	Re: FS: Misc parts I need the crossmember for sure and i also need the pressure plate can you text or call me at 2512846880

11-13-2014, 12:41 AM	#10
frijol79 Registered User Join Date: Jul 2009 Location: Santa Rosa, CA Posts: 857	Pm sent

12-14-2014, 02:45 PM	#11
1of956 Registered User Join Date: May 2013 Location: Virginia beach va. Posts: 66	Re: FS: Misc parts i will take the oil pan

01-20-2015, 10:53 PM	#12
97tbird Registered User Join Date: Apr 2012 Location: Plainfield, IL Posts: 140	Re: FS: Misc parts bump Intake, exhaust manifolds, 1 set of tires sold. __________________ 2003 MACH 1 1997 Thunderbird LX

03-15-2015, 09:48 PM	#13
AzAzure03 Registered User Join Date: Jul 2014 Location: Mesa, AZ Posts: 46	Re: FS: Misc parts Will the oil pan fit a Mach 1?

03-30-2015, 09:41 PM	#15
not a gt Registered User Join Date: Mar 2007 Location: Waaayy out in the country,leave your GPS at home! Posts: 4,825	Re: FS: Misc parts How is the rubber looking on the uppers?? Pic? __________________ 2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)