|
|
Body, Chassis & Interior Body, Chassis and Interior mods/discussions |
|
Thread Tools | Display Modes |
02-20-2014, 02:47 PM | #51 |
Mach-T
Join Date: Jun 2004
Location: DFW
Posts: 2,865
|
Re: Mach 1 Headlight knob
Very nice looking fuel door, one of the best I have seen. I am sure there are some people that may spend big money on quality. Low runner, high margin. Certainly looks like you have a ton of time in it.
__________________
Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP |
02-20-2014, 04:14 PM | #52 |
Registered User
Join Date: Apr 2010
Location: Winston-Salem, NC
Posts: 494
|
Re: Mach 1 Headlight knob
Don't happen to have the CAD file for the fuel door do you? What software do you use for modeling? You do some good work! What do you do for a living if you don't mind my asking?
__________________
2004 DSG Mach 1 MGW STS, JLT RAI, PHP 3/8" Intake spacer, Bassani catted x-pipe, Magnaflow Magnapacks, FRPP (Motive) 4.30s, 31 Spline Cobra Differential, 31 Spline Moser Axles, GMS Girdle, H&R Super Sports, Koni Yellow Adjustable shocks/struts, MM caster/camber plates
|
02-20-2014, 08:45 PM | #53 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Mach 1 Headlight knob
If you were a female you would be called a "D **k Tease" lol , I was reaching for my checkbook when I read the last line , the matte black is BEAUTIFUL, would match perfect with the off color I painted my back bumper
That is the one thing I never liked about the AM one I have...it is shiny, awesome work on that .
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
02-21-2014, 12:43 AM | #54 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Wow!!! Excellent job. It looks better than mine IMO.
__________________
|
02-21-2014, 08:45 AM | #55 |
95steedamustang
Join Date: May 2009
Location: Knoxville TN
Posts: 55
|
Re: Mach 1 Headlight knob
^^^
Thanks for the love on the Fuel door. I really wish I could do several because I know a lot of people are looking for them, but I just don't have the time and the material I used was expensive. I spent a lot of extra time to make sure the curve and bolt holes were just right and Mach 1 really detailed in. Not a GT...I could easily turn that fuel door matte black with a little powder coat. That was the easy part of the fuel door job. I will be working on a coin delete and one other piece so I'll make sure and do a few extra. |
02-21-2014, 01:15 PM | #56 | |
Registered User
Join Date: Apr 2010
Location: Winston-Salem, NC
Posts: 494
|
Re: Mach 1 Headlight knob
Quote:
__________________
2004 DSG Mach 1 MGW STS, JLT RAI, PHP 3/8" Intake spacer, Bassani catted x-pipe, Magnaflow Magnapacks, FRPP (Motive) 4.30s, 31 Spline Cobra Differential, 31 Spline Moser Axles, GMS Girdle, H&R Super Sports, Koni Yellow Adjustable shocks/struts, MM caster/camber plates
|
|
02-25-2014, 02:21 PM | #57 |
Registered User
Join Date: Aug 2012
Location: Atlanta GA
Posts: 7
|
Re: Mach 1 Headlight knob
I'll take one of everything you made.... seriously!
|
02-26-2014, 03:03 AM | #58 |
Guest
Join Date: Jan 2012
Location: Tomball TX
Posts: 415
|
Re: Mach 1 Headlight knob
Would like to see if you could make a snap on Shifter bezel. I have been trying over the years to get MGW to make one.
LS |
02-27-2014, 05:12 PM | #59 |
95steedamustang
Join Date: May 2009
Location: Knoxville TN
Posts: 55
|
Re: Mach 1 Headlight knob
You mean the piece that goes around the shift boot? on the Mach 1's
|
02-28-2014, 07:25 PM | #60 |
Registered User
Join Date: Apr 2008
Location: Manasquan, NJ
Posts: 106
|
Re: Mach 1 Headlight knob
+ 4 on the coin delete. I got one of the plastic ones off ebay awhile back and has since been scratched up, a nice shiny metal one would be well worth it!
Where did you get those floor mats with the side Mach 1 logo? Don't tell me you made those too lol
__________________
04 Screaming Yellow 13.4@106mph SLP LM2 & Catted X, MGW Short throw, VAP Intake spacer, JLT Ram Air, BBK Twin 62mm Throttle body |
02-28-2014, 11:24 PM | #61 | |
95steedamustang
Join Date: May 2009
Location: Knoxville TN
Posts: 55
|
Re: Mach 1 Headlight knob
Quote:
Floor mats are the old CDC ones that were discontinued years ago. I spent a year looking and a NOS set that popped up on eBay and I grabbed it. They have never seen a pair of shoes, I only put them in now for shows. |
|
02-28-2014, 11:28 PM | #62 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Mach 1 Headlight knob
"I have looked at several and am not impressed. I am thinking of making one that actually snaps in place and replaces the coin holder so it would be flush fit. Most of what I see sticks on top and look like crap".
Standing by for your version
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
03-01-2014, 11:31 PM | #63 |
And Leadfoot
Join Date: Sep 2004
Location: Easy Street
Posts: 6,468
|
Re: Mach 1 Headlight knob
The coin delete I have is metal, but I can't remember where I got it. I know I've had it for about 8 years. It sticks up alittle bit, but I could'nt care less about that. Their was one coin delete someone sold was black and had Mach 1 stamped on it (maybe MGW?). It was probably discontinued.
__________________
'23 Fighter Jet Gray Mach 1 (Automatic, 470hp/410tq) '04 Azure Blue Mach 1 (5Spd., 305hp/320tq) '17 Blue Streak Dodge Ram 1500 Quad Cab 4X4 (Automatic, 395hp/410tq) "She's An Underage Angel With A Dented Halo"-She Needs Rock n Roll---Motley Crue Every now and then, say What The F***. What The F***, gives you freedom. With freedom comes opportunity. Opportunity, makes your future. If you can't say it.......you can't do it.----Miles |
03-08-2014, 11:30 PM | #64 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
orangemachone A++
You are the man orangemachone!! I sent him my gloss black AM fuel door, What he received:
What I got back: Awesome!!! Just what I wanted and I painted the silver screws the charcoal gray that didn't match the interior:
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
03-09-2014, 02:57 PM | #65 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Mach 1 Headlight knob
I had removed the Ford blue oval on the right side trunk panel when I blacked out the rear, put this in its place (downshift at 70 to 4th with full throttle is freakin brutal!! Thanks again for ALL the help installing P1).
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq Last edited by not a gt; 03-09-2014 at 10:20 PM. |
03-09-2014, 03:36 PM | #66 |
Registered User
Join Date: Feb 2014
Location: Monroe NC
Posts: 120
|
Re: Mach 1 Headlight knob
I made this a while back |
03-09-2014, 03:46 PM | #67 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Mach 1 Headlight knob
Wow, that is unique and pretty ccol, any significance on the "3"? (and please don't say the "E" word)!!
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
03-09-2014, 03:51 PM | #68 |
Registered User
Join Date: Feb 2014
Location: Monroe NC
Posts: 120
|
Re: Mach 1 Headlight knob
I bought a #3 and #8 off of ebay both are 1 1/2 dia . I made the 8 into one and put it on my 04 red v6 my son drives. The red breaks up the overly dark interior of the mach. No significance in a number to me . I wish I could find a dark billet lighter plug,somebody on ebay made an AC/DC one but he quit making them.
|
03-09-2014, 09:51 PM | #69 |
95steedamustang
Join Date: May 2009
Location: Knoxville TN
Posts: 55
|
Re: orangemachone A++
Glad your happy with it. Definitely fits the car better than gloss
|
04-06-2014, 08:04 PM | #70 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Mach 1 Headlight knob
I will be working on a coin delete and one other piece so I'll make sure and do a few extra.
Any updates on this orangemachone?? Standing by
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
04-08-2014, 11:33 AM | #71 |
95steedamustang
Join Date: May 2009
Location: Knoxville TN
Posts: 55
|
Re: Mach 1 Headlight knob
not too much longer
|
04-08-2014, 12:14 PM | #72 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Mach 1 Headlight knob
whats up with the coin holder delete, is it gonna be a standard stick over piece? I dont want an engraved one because Im gonna drill it for my line lock switch.
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
04-08-2014, 12:30 PM | #73 | |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Mach 1 Headlight knob
Quote:
I have looked at several and am not impressed. I am thinking of making one that actually snaps in place and replaces the coin holder so it would be flush fit. Most of what I see sticks on top and looks like crap. He never said about it being engraved, guess that can be listed for him.
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
|
04-08-2014, 12:54 PM | #74 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Mach 1 Headlight knob
^^^ great, thanks, I only had a minute to browse this thread real fast...sounds like more of what Im looking for
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
04-09-2014, 10:38 PM | #75 |
95steedamustang
Join Date: May 2009
Location: Knoxville TN
Posts: 55
|
Re: Mach 1 Headlight knob
Mine will snap in place and replace the plastic coin delete. It will be no problem to do one without engraving for your purposes.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|