Anyone doing 4.10s and nitrous - Page 2 - 2003-04 Mach 1 Registry Owners Club

Chances50 · 08-22-2013, 07:09 PM

I ran a 175 with 4.10's. The key to bigger shots is nozzle placement. I talked to a rep from NX and he said the farther from the throttle body the better on a single nozzle system. Said it has more time to atomize and wont puddle.

gonemad · 08-23-2013, 09:23 AM

Quote:

Originally Posted by 04torchedpony

What's been your fastest et? My goal is 10.9x just curious if its doable on a 125-150 shot.

Have been 11.08@124.5 so far. Waiting on cooler weather and ill head back out with a little weight removal and should be able to go 10.9x and hoping for 10.8x. I do have a full suspension and a wicked trans which def shaves off some ET.

gonemad · 08-23-2013, 09:29 AM

Quote:

Originally Posted by ScreamingMach46

I had 4.10s and a NX 100 shot with 315/35/17 BFG DR2s. I could cut 1.55-1.57 60's spraying in 1st. Only trapped 114mph at 12.09 though. I think a 3.73 would have been better unless if my clutch was slipping on the top end or maybe bottle pressure dropped off killing my MPH.

Don't remember my RPM at the traps but my shift light was on for a little while (set at 6200rpm), so I imagin was around 6600-6700.

Just a heads up with 4.10s and @ 6700rpm with those tires your trap speed should be a tick under 125mph....your clutch was frying itself

04torchedpony · 08-26-2013, 02:32 AM

[QUOTE=gonemad;1558316]Have been 11.08@124.5 so far. Waiting on cooler weather and ill head back out with a little weight removal and should be able to go 10.9x and hoping for 10.8x. I do have a full suspension and a wicked trans which def shaves off some ET.[/

Awesome, w my mods and a 150 I should be at my goal.

08-22-2013, 07:09 PM	#26
Chances50 Registered User Join Date: Jun 2008 Location: Haskell, Ok Posts: 1,325	Re: Anyone doing 4.10s and nitrous I ran a 175 with 4.10's. The key to bigger shots is nozzle placement. I talked to a rep from NX and he said the farther from the throttle body the better on a single nozzle system. Said it has more time to atomize and wont puddle. __________________ 03 OW 5 speed 84k miles very clean. For sale!

08-26-2013, 02:32 AM	#29
04torchedpony Boost FTW!!! Join Date: Jan 2012 Location: Greenbrier, AR Posts: 199	Re: Anyone doing 4.10s and nitrous [QUOTE=gonemad;1558316]Have been 11.08@124.5 so far. Waiting on cooler weather and ill head back out with a little weight removal and should be able to go 10.9x and hoping for 10.8x. I do have a full suspension and a wicked trans which def shaves off some ET.[/ Awesome, w my mods and a 150 I should be at my goal. __________________ 04 mach- 5.0 stroker fully forged 10.2-1 compression, Arp hardware, 98 cobra cams, return style fuel system, bassani mid lengths, bassani orx, bassani cat back, mgw short throw, 39# injectors, bbk lowering springs, upr lca, tubular k, upr coil overs, promotion t3650, ram supergrip HD, Yukon 31 spline axles and 31 spline dura grip. Best 1000ft- 10.42 @98 with slicks and a bad slipping clutch Last edited by 04torchedpony; 08-26-2013 at 02:54 AM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)