|
01-02-2013, 09:24 AM | #1 |
Mach-o-holic
Join Date: May 2010
Location: La La Land
Posts: 1,276
|
4.10s installed!
I just finished installing my parts: Ford Racing 4.10s, Moser 31 spline axles, FRPP T-lok, Moser/ARP main bearing studs, and the FFRP Girdle. I will be editing a video I made to help others who want to do gears. Here are some pix for now.
__________________
2003 Mach 1 TR 5 Speed IUP Bolt ons: You name it! 4.10s too 2004 Cobra Screaming Yellow 2.3L Whipple Gear install vid https://www.youtube.com/watch?v=tJrAIDCpbDI Clutch Replacement Vid http://www.youtube.com/watch?v=UFr0Rur_EWc Wideband Install Vid http://www.youtube.com/watch?v=GmL1KBmWyhg |
01-02-2013, 10:41 AM | #2 |
Registered User
Join Date: Mar 2011
Location: Montreal, Canada
Posts: 136
|
Re: 4.10s installed!
Cool. That is my next mod but 4.30s.
Looking forward for the vid. Thanks....... |
01-02-2013, 11:04 AM | #3 |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: 4.10s installed!
Props for doing it yourself man! This is something I need to learn to do.
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
01-02-2013, 11:51 AM | #4 |
Mach-o-holic
Join Date: May 2010
Location: La La Land
Posts: 1,276
|
Re: 4.10s installed!
I came up with a few "back yard mechanic" techniques you'll see in the video- like putting the axle shaft in the carrier and a wheel on the axle shaft so I could torque the ring gear down without marring up the carrier in a vice. It's worth a good laugh to see at the least. High quality entertainment at its finest
__________________
2003 Mach 1 TR 5 Speed IUP Bolt ons: You name it! 4.10s too 2004 Cobra Screaming Yellow 2.3L Whipple Gear install vid https://www.youtube.com/watch?v=tJrAIDCpbDI Clutch Replacement Vid http://www.youtube.com/watch?v=UFr0Rur_EWc Wideband Install Vid http://www.youtube.com/watch?v=GmL1KBmWyhg |
01-02-2013, 12:24 PM | #5 |
Registered User
Join Date: May 2006
Location: ...
Posts: 280
|
Re: 4.10s installed!
U paint a pattern on it?
__________________
facebook.com/modmafiaperformance |
01-02-2013, 03:06 PM | #6 |
Mach-o-holic
Join Date: May 2010
Location: La La Land
Posts: 1,276
|
Re: 4.10s installed!
Yeah, a few times. I had to remove the pinion bearing and adjust a shim. I asked the guy who pressed it to re-use the factory shim and he added 20 thousandths. I had to get that removed and put back to factory shim! ..
__________________
2003 Mach 1 TR 5 Speed IUP Bolt ons: You name it! 4.10s too 2004 Cobra Screaming Yellow 2.3L Whipple Gear install vid https://www.youtube.com/watch?v=tJrAIDCpbDI Clutch Replacement Vid http://www.youtube.com/watch?v=UFr0Rur_EWc Wideband Install Vid http://www.youtube.com/watch?v=GmL1KBmWyhg Last edited by XSELLR8; 01-11-2013 at 04:21 PM. |
01-02-2013, 09:56 PM | #7 |
cruzmach1
Join Date: Sep 2009
Location: Bronx NY
Posts: 801
|
Re: 4.10s installed!
How you like the gears??
__________________
2004 Mustang mach 1 (5-Speed) Vortech V-2 with intercooler 455RWHP & 396RWTQ Mustang Magic Tune 3/8 PHP Intake Spacer Mac 5/8 Long Tube Headers Mac Catted H-Pipe Magnaflow Cat Back Steeda Short throw shifter |
01-03-2013, 04:51 AM | #8 |
Mach-o-holic
Join Date: May 2010
Location: La La Land
Posts: 1,276
|
Re: 4.10s installed!
So far I'm lovin' the car feeling so light- easy to get going, not lugging in 5th etc. I am, however, doing this one by the book and am trying to wear them in with heat cycles and haven't gotten on it fully. I know (and have seen first hand) that you can technically get right in and beat the gears hard without having a problem, but this is the way I want to do it. The video came out to be roughly an hour and a half, so I'm trying to trim it down a bit and maybe post it in segments. Maybe I'll be done today.
__________________
2003 Mach 1 TR 5 Speed IUP Bolt ons: You name it! 4.10s too 2004 Cobra Screaming Yellow 2.3L Whipple Gear install vid https://www.youtube.com/watch?v=tJrAIDCpbDI Clutch Replacement Vid http://www.youtube.com/watch?v=UFr0Rur_EWc Wideband Install Vid http://www.youtube.com/watch?v=GmL1KBmWyhg Last edited by XSELLR8; 01-03-2013 at 07:08 AM. |
01-04-2013, 07:56 PM | #9 | |
Registered User
Join Date: Aug 2011
Location: compton ca
Posts: 328
|
Quote:
Sent from straight outta Compton a Yung brotha named 5DEUCE writin on Tapatalk sippin lemon juice |
|
01-09-2013, 04:23 PM | #10 |
Mach-o-holic
Join Date: May 2010
Location: La La Land
Posts: 1,276
|
Re: 4.10s installed!
It's about to get real nerdy here! I'm uploading my vids as we chat. If anyone can sit through these things, feel free to add comments on the youtube vids so I can make the movies better. I had to separate it into 15 minute sections, so I lost some of the title slides that explained certain parts. I, myself, don't want to sit through it three more times for editing (especially since I have college classes again) so I'm just putting it up as it is. 5 sections
__________________
2003 Mach 1 TR 5 Speed IUP Bolt ons: You name it! 4.10s too 2004 Cobra Screaming Yellow 2.3L Whipple Gear install vid https://www.youtube.com/watch?v=tJrAIDCpbDI Clutch Replacement Vid http://www.youtube.com/watch?v=UFr0Rur_EWc Wideband Install Vid http://www.youtube.com/watch?v=GmL1KBmWyhg |
01-09-2013, 08:39 PM | #11 |
cruzmach1
Join Date: Sep 2009
Location: Bronx NY
Posts: 801
|
Re: 4.10s installed!
You have the link to the video?
__________________
2004 Mustang mach 1 (5-Speed) Vortech V-2 with intercooler 455RWHP & 396RWTQ Mustang Magic Tune 3/8 PHP Intake Spacer Mac 5/8 Long Tube Headers Mac Catted H-Pipe Magnaflow Cat Back Steeda Short throw shifter |
01-09-2013, 09:35 PM | #12 |
Registered User
Join Date: Aug 2010
Location: boston, ma
Posts: 262
|
Re: 4.10s installed!
post up the links!
__________________
MGW shifter, FRP alum DS, FRP cobra clutch, FRP alum FW, 17x9 black 03 cobra wheels, 275x40 NT05, Cut stock springs 3/4 coil front no isos 1 coil rear both isos, MM HD LCA, Bassani CB, JLT RAI, UPR OR X pipe |
01-09-2013, 10:13 PM | #13 |
Mach-o-holic
Join Date: May 2010
Location: La La Land
Posts: 1,276
|
Re: 4.10s installed!
I have the 6 vids done. My brother insisted I do them all on his new MAC. It's taking forever to upload.
The movies are intended to explain as much as was possible, so sorry if they get really basic. Here are the first two of the five. I'll get the rest up ASAP. I promise the camera gets less shaky as time goes on I lost a few captions during the process, but the video still works. I'll edit later Enjoy Part 1 https://www.youtube.com/watch?v=tJrAIDCpbDI Part 2 https://www.youtube.com/watch?v=DAwNEobkMmE Part 3 http://www.youtube.com/watch?v=tj5y-HXcgPk Part 4 http://www.youtube.com/watch?v=KUIej-eqdRI Part 5-A http://m.youtube.com/watch?v=-X3dgPfoZo0 Part 5-B http://m.youtube.com/watch?v=qaoN7n5gUW0 Part 6 http://m.youtube.com/watch?v=0ltKdHNVKIU
__________________
2003 Mach 1 TR 5 Speed IUP Bolt ons: You name it! 4.10s too 2004 Cobra Screaming Yellow 2.3L Whipple Gear install vid https://www.youtube.com/watch?v=tJrAIDCpbDI Clutch Replacement Vid http://www.youtube.com/watch?v=UFr0Rur_EWc Wideband Install Vid http://www.youtube.com/watch?v=GmL1KBmWyhg Last edited by XSELLR8; 01-11-2013 at 08:19 PM. |
01-10-2013, 12:12 PM | #14 |
Mach-T
Join Date: Jun 2004
Location: DFW
Posts: 2,865
|
Re: 4.10s installed!
Awesome job! I wish you were around when I did mine. I was sweating bullets when I went for the first test drive.
__________________
Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP |
01-10-2013, 01:34 PM | #15 |
Mach-o-holic
Join Date: May 2010
Location: La La Land
Posts: 1,276
|
Re: 4.10s installed!
Me too! Something about feeling first hand that the diff with the ring gear attached weighs more than a bowling ball, then thinking about how many RPMs its turning- makes ya a little nervous
__________________
2003 Mach 1 TR 5 Speed IUP Bolt ons: You name it! 4.10s too 2004 Cobra Screaming Yellow 2.3L Whipple Gear install vid https://www.youtube.com/watch?v=tJrAIDCpbDI Clutch Replacement Vid http://www.youtube.com/watch?v=UFr0Rur_EWc Wideband Install Vid http://www.youtube.com/watch?v=GmL1KBmWyhg Last edited by XSELLR8; 01-10-2013 at 04:39 PM. |
01-10-2013, 02:25 PM | #16 | |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: 4.10s installed!
Quote:
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
|
01-10-2013, 02:33 PM | #17 |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: 4.10s installed!
I wanna say GREAT JOB!
These are the type of threads that help people!
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
01-10-2013, 04:30 PM | #18 |
Mach-o-holic
Join Date: May 2010
Location: La La Land
Posts: 1,276
|
Re: 4.10s installed!
AH, 13.78. VERY bad shift into 3rd. I REALLY didn't want to miss the gear on the last run. It wasn't too bad. Everyone was running almost a full second slower. My brother's 99 LS1 camaro with an ms3 cam hit 13.99. You can hear me pep talk the car in the video lol. I installed a rebuilt tranny when I got the car. It has been very stubborn in the cold, but it's getting better with time.
http://www.youtube.com/watch?v=wlVAUPguAig VIDEOS WILL BE ADDED TO POST #13 UPON COMPLETION
__________________
2003 Mach 1 TR 5 Speed IUP Bolt ons: You name it! 4.10s too 2004 Cobra Screaming Yellow 2.3L Whipple Gear install vid https://www.youtube.com/watch?v=tJrAIDCpbDI Clutch Replacement Vid http://www.youtube.com/watch?v=UFr0Rur_EWc Wideband Install Vid http://www.youtube.com/watch?v=GmL1KBmWyhg Last edited by XSELLR8; 01-10-2013 at 08:07 PM. |
01-10-2013, 09:14 PM | #19 | |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: 4.10s installed!
Quote:
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
|
01-10-2013, 09:35 PM | #20 |
Mach-o-holic
Join Date: May 2010
Location: La La Land
Posts: 1,276
|
Re: 4.10s installed!
Around 2020 elevation I believe.
__________________
2003 Mach 1 TR 5 Speed IUP Bolt ons: You name it! 4.10s too 2004 Cobra Screaming Yellow 2.3L Whipple Gear install vid https://www.youtube.com/watch?v=tJrAIDCpbDI Clutch Replacement Vid http://www.youtube.com/watch?v=UFr0Rur_EWc Wideband Install Vid http://www.youtube.com/watch?v=GmL1KBmWyhg |
01-10-2013, 10:06 PM | #21 |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: 4.10s installed!
You should be happy with the 4.10s and some good shifting! Car runs strong
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
01-11-2013, 04:45 AM | #22 |
Mach-o-holic
Join Date: May 2010
Location: La La Land
Posts: 1,276
|
Re: 4.10s installed!
Thanks. 1st time with drag radials for me and they were bald hand me downs from a friend at that. I know I need some practice
__________________
2003 Mach 1 TR 5 Speed IUP Bolt ons: You name it! 4.10s too 2004 Cobra Screaming Yellow 2.3L Whipple Gear install vid https://www.youtube.com/watch?v=tJrAIDCpbDI Clutch Replacement Vid http://www.youtube.com/watch?v=UFr0Rur_EWc Wideband Install Vid http://www.youtube.com/watch?v=GmL1KBmWyhg |
01-11-2013, 09:37 AM | #23 |
Mach-o-holic
Join Date: May 2010
Location: La La Land
Posts: 1,276
|
Re: 4.10s installed!
Vid 5-B didn't come out quite like I wanted. It needs some editing and more explanation on gear patterns and what to do if its off. Hang tight and I'll correct it as soon as I can
__________________
2003 Mach 1 TR 5 Speed IUP Bolt ons: You name it! 4.10s too 2004 Cobra Screaming Yellow 2.3L Whipple Gear install vid https://www.youtube.com/watch?v=tJrAIDCpbDI Clutch Replacement Vid http://www.youtube.com/watch?v=UFr0Rur_EWc Wideband Install Vid http://www.youtube.com/watch?v=GmL1KBmWyhg Last edited by XSELLR8; 01-11-2013 at 05:04 PM. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|