FS: short block plus others parts - 2003-04 Mach 1 Registry Owners Club

slvr35th · 01-04-2013, 12:44 PM

I have a fully forged teskid short block with all arp hardware, the Pistons are flat top .02 icon offset pistons that have been ceramic coated, the rods are forged I beam with arp 2000 bolts. The crank is a stock cobra crank, has clevite 77 mains and rod bearings. It will also come with arp head studs. also has a ford racing 4v oil pump and pick up tube. It has a bout 1000 miles on it. they nly reason it was taken out was i traded a 9.3 comp short block for this hi comp short block so the guy could run 91 and e-85 in his cobra. he made 570/590 tq though an eaton. It did not smoke when taken out.

I would like to get 2800 for it plus shipping.

I also have a set of heads and valve covers and mach timing cover and cobra pan i can install for another 1000.

Valve covers, One is powder coated gloss black the other factory black, as is 120, to match powder coat any color, 200.

99 cobra cams, PN xr3e-6a271-ad, xr3e-6a270-ad
Cobra pan $70
01-04 side scoops $65
01-04 driver side scoop $30
One license plate light lenses, $10
Sparco harness bar, $250 bolts to factor seat belt locations and can tell a difference in stiffness of car when installed
4v t-stat housing with 170 t-stat, $50

I have tons of 99-04 gt stuff, i parted the whole car, motor trans and rearend gone along with the seats, only had 16K miles on it. I have almost everything else still.

also have tons of misc misc 4v and 2v motor parts. just ask if you need something!
http://www.svtperformance.com/forums...belts-egr.html
http://www.svtperformance.com/forums...isc-parts.html
I will get pics up later or text 918-625-9502

Nick

bbovich · 01-04-2013, 11:01 PM

would you be able to get an estimated shipping quote to 11706?

slvr35th · 01-06-2013, 12:37 AM

Quote:

Originally Posted by bbovich

would you be able to get an estimated shipping quote to 11706?

What for? The short block?

CMEmach1 · 01-07-2013, 12:35 AM

What kind of pistons, rings, rods are in it? Is it bored over or stock bore? Can you send me any pics. My email is: CMEmach1@comcast.net

slvr35th · 01-07-2013, 12:45 AM

Quote:

Originally Posted by CMEmach1

What kind of pistons, rings, rods are in it? Is it bored over or stock bore? Can you send me any pics. My email is: CMEmach1@comcast.net

It has icon offset pistons, ceramic coated. It has total seal file to fit rings. The rods are sean hyland I beams with arp 2000 7/16 bolts

slvr35th · 01-08-2013, 06:09 PM

Bump

01-04-2013, 12:44 PM	#1
slvr35th Registered User Join Date: Nov 2009 Location: Cleveland, Ok Posts: 307	FS: short block plus others parts I have a fully forged teskid short block with all arp hardware, the Pistons are flat top .02 icon offset pistons that have been ceramic coated, the rods are forged I beam with arp 2000 bolts. The crank is a stock cobra crank, has clevite 77 mains and rod bearings. It will also come with arp head studs. also has a ford racing 4v oil pump and pick up tube. It has a bout 1000 miles on it. they nly reason it was taken out was i traded a 9.3 comp short block for this hi comp short block so the guy could run 91 and e-85 in his cobra. he made 570/590 tq though an eaton. It did not smoke when taken out. I would like to get 2800 for it plus shipping. I also have a set of heads and valve covers and mach timing cover and cobra pan i can install for another 1000. Valve covers, One is powder coated gloss black the other factory black, as is 120, to match powder coat any color, 200. 99 cobra cams, PN xr3e-6a271-ad, xr3e-6a270-ad Cobra pan $70 01-04 side scoops $65 01-04 driver side scoop $30 One license plate light lenses, $10 Sparco harness bar, $250 bolts to factor seat belt locations and can tell a difference in stiffness of car when installed 4v t-stat housing with 170 t-stat, $50 I have tons of 99-04 gt stuff, i parted the whole car, motor trans and rearend gone along with the seats, only had 16K miles on it. I have almost everything else still. also have tons of misc misc 4v and 2v motor parts. just ask if you need something! http://www.svtperformance.com/forums...belts-egr.html http://www.svtperformance.com/forums...isc-parts.html I will get pics up later or text 918-625-9502 Nick __________________ 2004 Mach 1 Procharged _D1sc Polished 17#_T-56_Carbon Fiber DS_Division X_Fore_Lethal_Anderson_Tial_MGW_Mahley_Spec_ Last edited by slvr35th; 01-04-2013 at 02:48 PM.

01-04-2013, 11:01 PM	#2
bbovich Registered User Join Date: Aug 2012 Location: East Islip, NY Posts: 85	Re: FS: short block plus others parts would you be able to get an estimated shipping quote to 11706?

01-07-2013, 12:35 AM	#4
CMEmach1 &amp;quot;281 SUPERCHARGED&amp;quot; Join Date: Sep 2002 Location: West Grove Pa. Posts: 1,716	Re: FS: short block plus others parts What kind of pistons, rings, rods are in it? Is it bored over or stock bore? Can you send me any pics. My email is: CMEmach1@comcast.net __________________ '03 Azure Mach1 #719 Built 12/5/02, In Garage 12/13/02 The Ride is Over It was a BLAST ! The Memories will Last Forever ! Thank You M1R !!!

01-08-2013, 06:09 PM	#6
slvr35th Registered User Join Date: Nov 2009 Location: Cleveland, Ok Posts: 307	Re: FS: short block plus others parts Bump __________________ 2004 Mach 1 Procharged _D1sc Polished 17#_T-56_Carbon Fiber DS_Division X_Fore_Lethal_Anderson_Tial_MGW_Mahley_Spec_

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)