|
|
General Registry Discussion Topics of Interest (Mach 1 Related or otherwise) for discussions that don't fit other forums. |
|
Thread Tools | Display Modes |
07-23-2012, 06:07 AM | #1 |
Registered User
Join Date: Oct 2004
Location: Shreveport, LA
Posts: 167
|
Need some help with with shops in the dallas area.
Basically, who is it the best shop in Dallas? I know there are millions of threads from who knows where asking this question, but I want current update information.
I have an 03 mach 1 with a vortex supercharger. She's falling to pieces. On my 3rd MAF. All of them suddenly revert to wide open and think I'm at 30,000 feet able level. Sometimes a trip around the block after and sometimes 3 weeks later. Someone around here will fix it, then 2 week later, BAM same thing. The just don't know what they are doing around here. I also need my tranny replaced as the 3rd and 4th gear synchro is out. Now in addition to all this, here comes the fun part. I want to have an 850+HP daily driver with absolutely no NOS. I need a company with experience with 4v modular motors that can both do all this and guide me through it without seeing an opportunity and ripping me a new *******. I need a good company I can trust with fair prices and good opinions. Someone that doesn't mind actually giving advice. This is going to be a multistage process starting with the MAF issue and moving next to the tranny then on to all the fun stuff. Any Ideas?
__________________
2003 Mach 1, Black w/IUP Vortech SC-Trim Supercharger with Aftercooler 42 LB Injectors AutoLogix Chip ( Custom Tuned for SC Setup ) High Flow Air Filter MAF BBK Ceramic Long Tubes BBK High Flow Catted H pipe Flowmaster American Thunder Catback Hurst Billet Plus Shifter Autometer Pillar Mounted Air/Fuel and Boost Gauges Bullet Fuel Door Billet AC Knobs 7# Boost 472 rwhp 390 rwtq |
07-23-2012, 06:42 AM | #2 |
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: Need some help with with shops in the dallas area.
GearHeads in Arlington or True Street in Mc Kinney. Either should be able to help you.
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
07-23-2012, 11:41 AM | #3 |
Registered User
Join Date: Sep 2011
Location: NY
Posts: 394
|
Re: Need some help with with shops in the dallas area.
I would stay away from GearHeads, I only hear bad things about them and have seen trouble with them in the past. True Street is who everyone always recommends to me and say they are great.
__________________
03 Mach 1 391 rwhp/353 rwtq N/A 106100s Bolt ons NA SVT intake 4.10s |
07-23-2012, 12:17 PM | #4 |
Mach-T
Join Date: Jun 2004
Location: DFW
Posts: 2,865
|
Re: Need some help with with shops in the dallas area.
HPP, ask for Manny. He's in Lewisville, TX.
__________________
Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP |
07-23-2012, 09:29 PM | #5 |
occasional user
Join Date: Oct 2009
Location: Hood cnty TX
Posts: 927
|
Re: Need some help with with shops in the dallas area.
Never had a prob with Gearheads. I wouldnt let anyone else touch my car. Stay away from Dallas mustang for sure.
__________________
03 dsg 5spd P1SC and stuff. Tuned at Gearheads. |
07-23-2012, 10:06 PM | #6 |
Registered User
Join Date: Oct 2004
Location: Shreveport, LA
Posts: 167
|
Re: Need some help with with shops in the dallas area.
Thanks for the help. I've heard of HPP before so I know they have been around for awhile. Gearheads and True Street are new to me.
__________________
2003 Mach 1, Black w/IUP Vortech SC-Trim Supercharger with Aftercooler 42 LB Injectors AutoLogix Chip ( Custom Tuned for SC Setup ) High Flow Air Filter MAF BBK Ceramic Long Tubes BBK High Flow Catted H pipe Flowmaster American Thunder Catback Hurst Billet Plus Shifter Autometer Pillar Mounted Air/Fuel and Boost Gauges Bullet Fuel Door Billet AC Knobs 7# Boost 472 rwhp 390 rwtq |
07-24-2012, 03:06 AM | #7 |
Add 49ci...but why?
Join Date: Jan 2007
Location: Abilene, TX
Posts: 622
|
Re: Need some help with with shops in the dallas area.
Stay away from HPP.
Gearheads is decent. I like my garage. I know what happens in there.
__________________
89 LX-NA 32v, 437rwhp NA 79 Coupe-Who knows 93 Typhoon-Daily 95 F350-Tow rig |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|