|
05-30-2012, 02:45 PM | #26 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Cheap way to pressurize your new motor's oil system
gonna pick this stuff up this weekend, thanks birdman
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
05-30-2012, 04:06 PM | #27 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: Cheap way to pressurize your new motor's oil system
that is how i did mine too....worked like a charm.
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
05-30-2012, 06:27 PM | #28 |
Torque wins!
Join Date: Dec 2004
Location: Florida
Posts: 13,167
|
Re: Cheap way to pressurize your new motor's oil system
That's why we're here.
Works good and cheap!
__________________
The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno |
05-31-2012, 01:28 AM | #29 |
Registered User
Join Date: Jun 2007
Location: Las Vegas
Posts: 1,086
|
Re: Cheap way to pressurize your new motor's oil system
Good info. I love cheap solutions.
I have used my $25 smoke machine with great success. I will definitely use this on my next engine build. |
05-31-2012, 09:49 AM | #30 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Cheap way to pressurize your new motor's oil system
can you start a thread on this please? Im sure a lot of us would benefit and I would love to be able to post it on the lightning forum as vacuum leaks tend to be a big issue there
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
06-14-2012, 12:31 PM | #31 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Cheap way to pressurize your new motor's oil system
picked up my stuff last night, they had a 1 gallon bleach sprayer for about $8 so I was out the door for 12.76 minus the clamps!
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|