|
02-10-2012, 11:55 PM | #1 |
Boost FTW!!!
Join Date: Jan 2012
Location: Greenbrier, AR
Posts: 199
|
Promotion powertrain
I just ordered a 750hp t3650 from them and a clutch kit. Anyone running this tranny or done business in the past with them?
__________________
04 mach- 5.0 stroker fully forged 10.2-1 compression, Arp hardware, 98 cobra cams, return style fuel system, bassani mid lengths, bassani orx, bassani cat back, mgw short throw, 39# injectors, bbk lowering springs, upr lca, tubular k, upr coil overs, promotion t3650, ram supergrip HD, Yukon 31 spline axles and 31 spline dura grip. Best 1000ft- 10.42 @98 with slicks and a bad slipping clutch |
02-11-2012, 12:18 AM | #2 |
systemdz
Join Date: Mar 2010
Location: Murray, KY
Posts: 1,131
|
Never used it but have heard good things about them. Good price and good warranty too!!!
__________________
2003 Mach 1 Torch Red, 4.6 WAP block .20 coated manley pistons, manley h-beams, 98 cobra cam, BTR springs, Fererra valves, BC auto 4r75w w Freddie Brown MVB w brake, CircleD 4c, built rear and baseline drag suspension. NOS wet kit w NANO. |
02-11-2012, 01:19 AM | #3 |
2004 Blk mach
Join Date: Apr 2005
Location: Lee's summit Missouri
Posts: 467
|
Re: Promotion powertrain
I bought my viperspec t56 from them a few years ago
__________________
2012 f150 FX4 SCREW the DD 2004 Black mach 1 previously 3.4l whipple on 30#'s Turbo build now in progress |
02-11-2012, 05:04 AM | #4 |
Boost FTW!!!
Join Date: Jan 2012
Location: Greenbrier, AR
Posts: 199
|
Re: Promotion powertrain
Did you have any problems out of that tranny
__________________
04 mach- 5.0 stroker fully forged 10.2-1 compression, Arp hardware, 98 cobra cams, return style fuel system, bassani mid lengths, bassani orx, bassani cat back, mgw short throw, 39# injectors, bbk lowering springs, upr lca, tubular k, upr coil overs, promotion t3650, ram supergrip HD, Yukon 31 spline axles and 31 spline dura grip. Best 1000ft- 10.42 @98 with slicks and a bad slipping clutch |
02-11-2012, 07:43 AM | #5 |
Whipple Blown!
Join Date: Jul 2005
Location: Coral Springs, FL
Posts: 642
|
I have the same tranny, been running it since 09 with no problems. Shifts pretty smooth and has handled anywhere from 550 to 620whp so far with not one complaint.
__________________
2003 Mach 1- Whipple 2.3 2008 GT- STS Single Turbo |
02-11-2012, 07:53 AM | #6 |
Registered User
Join Date: Mar 2010
Location: Toledo, Ohio
Posts: 33
|
Re: Promotion powertrain
from what they list. the only thing different from a 04 3650 is it has the 26 spline shaft.
|
02-11-2012, 08:13 AM | #7 |
systemdz
Join Date: Mar 2010
Location: Murray, KY
Posts: 1,131
|
I totally read this wrong, I thought you was asking about American Powertrain. my bad. I'm running the same trans in my car now. Just got it so it hasn't been abused yet.
It has angle 2nd gear, gorilla forks and the 26 spline input shaft.
__________________
2003 Mach 1 Torch Red, 4.6 WAP block .20 coated manley pistons, manley h-beams, 98 cobra cam, BTR springs, Fererra valves, BC auto 4r75w w Freddie Brown MVB w brake, CircleD 4c, built rear and baseline drag suspension. NOS wet kit w NANO. |
02-11-2012, 03:39 PM | #8 |
Registered User
Join Date: Jan 2010
Location: Byram,MS
Posts: 285
|
Re: Promotion powertrain
Walt has a long standing reputation for his work and his service on Ford transmissions.
Abuse it, it can handle it! |
02-11-2012, 08:15 PM | #9 |
2004 Blk mach
Join Date: Apr 2005
Location: Lee's summit Missouri
Posts: 467
|
Re: Promotion powertrain
Some clutch issues, but nothing with the tranny,
__________________
2012 f150 FX4 SCREW the DD 2004 Black mach 1 previously 3.4l whipple on 30#'s Turbo build now in progress |
02-12-2012, 09:33 PM | #10 |
Boost FTW!!!
Join Date: Jan 2012
Location: Greenbrier, AR
Posts: 199
|
Re: Promotion powertrain
Awesome, can't wait to get it going. Mine should be in the 550-600 rwhp range notice any difference in the shifting? Mill my mgw short throw go well with it?
__________________
04 mach- 5.0 stroker fully forged 10.2-1 compression, Arp hardware, 98 cobra cams, return style fuel system, bassani mid lengths, bassani orx, bassani cat back, mgw short throw, 39# injectors, bbk lowering springs, upr lca, tubular k, upr coil overs, promotion t3650, ram supergrip HD, Yukon 31 spline axles and 31 spline dura grip. Best 1000ft- 10.42 @98 with slicks and a bad slipping clutch |
02-12-2012, 10:47 PM | #11 |
Azure Blue Mach
Join Date: Apr 2007
Location: St. Petersburg, FL
Posts: 1,464
|
Re: Promotion powertrain
I had my viper t56 rebuilt by them and am using one of their clutches. No complaints and it has all been holding up fine.
__________________
'03 Azure Blue Mach 1 Built on 4/14/03 S&R Performance |
02-12-2012, 11:54 PM | #12 | |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Promotion powertrain
Quote:
I'm set on getting the same one you just order i'm looking at ordering next tax return (since i'm buyin house right now) -Promotion HD3650 -Ram powergrip HD clutch -Ram billet steel flywheel -MGW short throw shifter (have steeda right now) -trans mount I think thats it the price was amazing, all that and still under $3K and have a built trans, for sure think its the best bang for the buck for sure. make sure to post some pictures and some detail feedback ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
|
02-13-2012, 12:12 AM | #13 |
Mach Underhood
Join Date: Jan 2007
Location: FL
Posts: 1,677
|
Re: Promotion powertrain
Hopefully they have upped their game recently.
I have seen way too many bad trannies come out of there as of recent. Bitemark46 destroyed his, with only 315rwhp....and less than 2,000 miles...rated at 750.... His stocker lasted hundreds of passes and like 11+ years...
__________________
Stock 4.6 4V, Cobra Cammed: 11.63@117.84 - N/A T45 / 4.56 / Drag Radials - N/A 4V Video |
02-13-2012, 12:19 AM | #14 | |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Promotion powertrain
Quote:
i truly for the most part think some shops have bad days on stuff, but for the most part some of em really make good stuff ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
|
02-13-2012, 01:26 AM | #15 |
Boost FTW!!!
Join Date: Jan 2012
Location: Greenbrier, AR
Posts: 199
|
Re: Promotion powertrain
Ya that's what I'm scared of. I think I'll hang on to my stock tranny just in case the new on goes south. I'm gonna put the first 500 break in miles on it fast so I can get the full use of my 60 day warranty
__________________
04 mach- 5.0 stroker fully forged 10.2-1 compression, Arp hardware, 98 cobra cams, return style fuel system, bassani mid lengths, bassani orx, bassani cat back, mgw short throw, 39# injectors, bbk lowering springs, upr lca, tubular k, upr coil overs, promotion t3650, ram supergrip HD, Yukon 31 spline axles and 31 spline dura grip. Best 1000ft- 10.42 @98 with slicks and a bad slipping clutch |
02-13-2012, 06:27 AM | #16 |
certified MACH 1 nut
Join Date: Apr 2004
Location: nova scotia canada
Posts: 1,520
|
Re: Promotion powertrain
i have this same trany,sincros are still garbage
__________________
shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|