Procharger 3.4 Belt Length? - 2003-04 Mach 1 Registry Owners Club

blown03Mach1 · 11-06-2011, 09:35 PM

I am running a 4.0 pulley and I have a 3.4 pulley I am thinking about throwing on this pig. I need to know what length belt I need for the 3.4 pulley? I tried searching and the only reference to belt length with the 3.4 I found mentioned a 108.75" belt, but this person was also using a smaller idler pulley on their car as well.

So, what size belt for the 3.4? Will the same belt that is on the 4.0 work?

Thanks

Shane@TM · 11-07-2011, 09:31 AM

Should, there is a lot of room in the tensioner with that 109.8 belt. I ran a 3.6 just fine with it.

orangemach23 · 11-07-2011, 01:34 PM

Quote:

Originally Posted by blown03Mach1

I am running a 4.0 pulley and I have a 3.4 pulley I am thinking about throwing on this pig. I need to know what length belt I need for the 3.4 pulley? I tried searching and the only reference to belt length with the 3.4 I found mentioned a 108.75" belt, but this person was also using a smaller idler pulley on their car as well.

So, what size belt for the 3.4? Will the same belt that is on the 4.0 work?

Thanks

I run a 108" gates on my 3.4 pulley!

blown03Mach1 · 11-07-2011, 06:40 PM

Quote:

Originally Posted by orangemach23

I run a 108" gates on my 3.4 pulley!

Are all your other pulleys stil factory diameter? IE. Crank, water pump, idlers?

ASH302 · 11-08-2011, 04:34 AM

Greg you know my set up on the other pulleys pretty much
just have the thump RRR tensioner different
using a 3.4 pulley
mine is the K061080 (108 3/4) gates belt
hope this helps

ASh

11-06-2011, 09:35 PM	#1
blown03Mach1 8LB YNER Join Date: Mar 2005 Location: Tampa Posts: 5,661	Procharger 3.4 Belt Length? I am running a 4.0 pulley and I have a 3.4 pulley I am thinking about throwing on this pig. I need to know what length belt I need for the 3.4 pulley? I tried searching and the only reference to belt length with the 3.4 I found mentioned a 108.75" belt, but this person was also using a smaller idler pulley on their car as well. So, what size belt for the 3.4? Will the same belt that is on the 4.0 work? Thanks __________________ Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12...

11-07-2011, 09:31 AM	#2
Shane@TM Toledo Mustangs Join Date: Sep 2008 Location: toledo, ohio Posts: 1,433	Re: Procharger 3.4 Belt Length? Should, there is a lot of room in the tensioner with that 109.8 belt. I ran a 3.6 just fine with it. __________________ Toledo Mustang Club Under the knife AGAIN! "The more you mod it, the more it breaks" CRT PERFORMANCE TUNED

11-08-2011, 04:34 AM	#5
ASH302 Soldier for Christ Join Date: May 2009 Location: Willis, TX at The Daddy ASh Ranch Posts: 30,596	Re: Procharger 3.4 Belt Length? Greg you know my set up on the other pulleys pretty much just have the thump RRR tensioner different using a 3.4 pulley mine is the K061080 (108 3/4) gates belt hope this helps ASh __________________ 2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)