2003-2004 Cobra gauge cluster - 2003-04 Mach 1 Registry Owners Club

shake this · 09-13-2011, 09:58 AM

2003-2004 SVT gauge cluster out of a Mustang Cobra. Asking $200 obo

sorry for the picture quality but I pulled it off my phone. Let me know if you would like some better pictures.

RedRocket · 09-13-2011, 10:17 AM

How many miles are on the od? Thanks

shake this · 09-13-2011, 10:43 AM

I don't recall but if I remember correct, the milage is stored in the computer not in the cluster so it will read the correct milage for your car. If I'm wrong, I will find out the correct milage but I'm guessing less then 50k.

slvr35th · 09-13-2011, 01:51 PM

It's on the cluster not the comp!

shake this · 09-13-2011, 02:20 PM

^^^ after further research, I have concluded that you are correct. Thanks for clarifying.

I can hook the cluster up to my Mach and pull the miles this weekend and post it up if needed, just let me know.

RedRocket · 09-13-2011, 07:44 PM

Nice catch!

shake this · 09-13-2011, 07:54 PM

LOOKnGo,

I’ve looked at you over the past several years on this site to be a very respectable person. You have even answered several questions for me during the earlier years. So I was a little shocked when I opened up my thread to find what appears to be a very derogatory response. I’m really surprised that you didn’t first contact me via PM if you felt my thread was misleading or contained inaccurate information.

With that being said, I’ll be more then happy to address your two concerns in open forums. Regarding your first concern on the price, I did a quick search on ebay and other areas on the net to see what seemed to be a common asking price for the cluster. I know this isn’t always the most accurate indication of what something is worth. I’m a true believer that something is only worth as much as someone is willing to pay. That is why I’ve included “OBO”. If someone can convince me that they are giving me a fair asking price then I’ll be happy to accept it.

On to your 2nd concern, the picture I posted was when I first got the cluster. I too was concerned with the speed and RPM needles being pegged but once I installed the cluster in my Mach and the gauges did the sweep test, everything functioned as normal and the speed and RPM needles returned to there normal positions. I will post pictures tonight if it’s not to late showing the correction and I will also list the mileage for those that would like to know.
I hope this has cleared up any confusion but if not, feel free to ask further questions as I’m not here to take advantage of anyone nor do I wish to be taken advantage of.

shake this · 09-13-2011, 09:07 PM

I will offer a garentee as far is posting a video of the gauges working if a potential buyer sees a need to request it. However, as with any electronic devise that isn't installed by me, that's the best I can provide. I hope you will agree that that's as far as can be when dealing with used electronic equipment.

If that was your only concern, why didn't you ask it in the first place? I didn't realize you became a moderator for the "for sale" section. I guess a congratulations is in order.

shake this · 09-14-2011, 01:19 AM

I guess that's why I was concerned when you started asking, you are (or at least was) the goto guy for Cobra parts. No hard feelings from this end of the keyboard. I hope the same can be said from your end.

shake this · 09-14-2011, 01:23 AM

I hope the next group of pictures will help clear up any concerns about the quality or function of the gauges.

1st picture shows the gauges at rest, just like the picture LOOKnGo provided

Next few shows that the gauges can be moved to the "pegged" position

wish it was this easy to get a full tank of gas

shake this · 09-14-2011, 01:28 AM

Next one shows the cluster in my Mach and the key on. Notice all the gauges are in the correct position.

Her is a shot while the gauges are doing a test sweep. This is done any time you plug a cluster in. Feel free to test it yourself.

Last but not least, I found a scratch on the lower right corner and wanted to make any potential buyers aware. See LOOKnGO, I look out as well.

Because of the scratch and the milage was not even close to what I was expecting, I'm lowering the price to $200 obo.

shake this · 09-19-2011, 08:06 AM

On ebay for $150 if anyone is interested.

shake this · 09-27-2011, 09:14 AM

Sold

09-13-2011, 09:58 AM	#1
shake this Registered User Join Date: Oct 2004 Location: Lubbock, TX Posts: 1,559	2003-2004 Cobra gauge cluster 2003-2004 SVT gauge cluster out of a Mustang Cobra. Asking $200 obo sorry for the picture quality but I pulled it off my phone. Let me know if you would like some better pictures. __________________ Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you Last edited by shake this; 09-14-2011 at 01:33 AM.

09-13-2011, 10:17 AM	#2
RedRocket Registered User Join Date: May 2009 Location: Loxahatchee, Florida Posts: 556	Re: 2003-2004 Cobra gauge cluster How many miles are on the od? Thanks

09-13-2011, 10:43 AM	#3
shake this Registered User Join Date: Oct 2004 Location: Lubbock, TX Posts: 1,559	Re: 2003-2004 Cobra gauge cluster I don't recall but if I remember correct, the milage is stored in the computer not in the cluster so it will read the correct milage for your car. If I'm wrong, I will find out the correct milage but I'm guessing less then 50k. __________________ Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you

09-13-2011, 01:51 PM	#4
slvr35th Registered User Join Date: Nov 2009 Location: Cleveland, Ok Posts: 307	Re: 2003-2004 Cobra gauge cluster It's on the cluster not the comp! __________________ 2004 Mach 1 Procharged _D1sc Polished 17#_T-56_Carbon Fiber DS_Division X_Fore_Lethal_Anderson_Tial_MGW_Mahley_Spec_

09-13-2011, 02:20 PM	#5
shake this Registered User Join Date: Oct 2004 Location: Lubbock, TX Posts: 1,559	Re: 2003-2004 Cobra gauge cluster ^^^ after further research, I have concluded that you are correct. Thanks for clarifying. I can hook the cluster up to my Mach and pull the miles this weekend and post it up if needed, just let me know. __________________ Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you

09-13-2011, 07:44 PM	#6
RedRocket Registered User Join Date: May 2009 Location: Loxahatchee, Florida Posts: 556	Re: 2003-2004 Cobra gauge cluster Nice catch!

09-13-2011, 07:54 PM	#7
shake this Registered User Join Date: Oct 2004 Location: Lubbock, TX Posts: 1,559	Re: 2003-2004 Cobra gauge cluster LOOKnGo, I’ve looked at you over the past several years on this site to be a very respectable person. You have even answered several questions for me during the earlier years. So I was a little shocked when I opened up my thread to find what appears to be a very derogatory response. I’m really surprised that you didn’t first contact me via PM if you felt my thread was misleading or contained inaccurate information. With that being said, I’ll be more then happy to address your two concerns in open forums. Regarding your first concern on the price, I did a quick search on ebay and other areas on the net to see what seemed to be a common asking price for the cluster. I know this isn’t always the most accurate indication of what something is worth. I’m a true believer that something is only worth as much as someone is willing to pay. That is why I’ve included “OBO”. If someone can convince me that they are giving me a fair asking price then I’ll be happy to accept it. On to your 2nd concern, the picture I posted was when I first got the cluster. I too was concerned with the speed and RPM needles being pegged but once I installed the cluster in my Mach and the gauges did the sweep test, everything functioned as normal and the speed and RPM needles returned to there normal positions. I will post pictures tonight if it’s not to late showing the correction and I will also list the mileage for those that would like to know. I hope this has cleared up any confusion but if not, feel free to ask further questions as I’m not here to take advantage of anyone nor do I wish to be taken advantage of. __________________ Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you

09-13-2011, 09:07 PM	#8
shake this Registered User Join Date: Oct 2004 Location: Lubbock, TX Posts: 1,559	Re: 2003-2004 Cobra gauge cluster I will offer a garentee as far is posting a video of the gauges working if a potential buyer sees a need to request it. However, as with any electronic devise that isn't installed by me, that's the best I can provide. I hope you will agree that that's as far as can be when dealing with used electronic equipment. If that was your only concern, why didn't you ask it in the first place? I didn't realize you became a moderator for the "for sale" section. I guess a congratulations is in order. __________________ Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you

09-14-2011, 01:19 AM	#9
shake this Registered User Join Date: Oct 2004 Location: Lubbock, TX Posts: 1,559	Re: 2003-2004 Cobra gauge cluster I guess that's why I was concerned when you started asking, you are (or at least was) the goto guy for Cobra parts. No hard feelings from this end of the keyboard. I hope the same can be said from your end. __________________ Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you

09-14-2011, 01:23 AM	#10
shake this Registered User Join Date: Oct 2004 Location: Lubbock, TX Posts: 1,559	Re: 2003-2004 Cobra gauge cluster I hope the next group of pictures will help clear up any concerns about the quality or function of the gauges. 1st picture shows the gauges at rest, just like the picture LOOKnGo provided Next few shows that the gauges can be moved to the "pegged" position wish it was this easy to get a full tank of gas __________________ Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you

09-14-2011, 01:28 AM	#11
shake this Registered User Join Date: Oct 2004 Location: Lubbock, TX Posts: 1,559	Re: 2003-2004 Cobra gauge cluster Next one shows the cluster in my Mach and the key on. Notice all the gauges are in the correct position. Her is a shot while the gauges are doing a test sweep. This is done any time you plug a cluster in. Feel free to test it yourself. Last but not least, I found a scratch on the lower right corner and wanted to make any potential buyers aware. See LOOKnGO, I look out as well. Because of the scratch and the milage was not even close to what I was expecting, I'm lowering the price to $200 obo. __________________ Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you

09-19-2011, 08:06 AM	#12
shake this Registered User Join Date: Oct 2004 Location: Lubbock, TX Posts: 1,559	Re: 2003-2004 Cobra gauge cluster On ebay for $150 if anyone is interested. __________________ Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you

09-27-2011, 09:14 AM	#13
shake this Registered User Join Date: Oct 2004 Location: Lubbock, TX Posts: 1,559	Re: 2003-2004 Cobra gauge cluster Sold __________________ Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)