|
08-08-2011, 06:29 PM | #1 |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
How does everyone like their aluminum flywheels?
Well I'm kicking around the idea of throwing one on. Just want to hear what you guys think about yours.
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
08-08-2011, 06:40 PM | #2 |
i bet my car is faster...
Join Date: Nov 2009
Location: New Orleans, La
Posts: 590
|
Re: How does everyone like their aluminum flywheels?
a little harder to daily drive but you get used to it..havent been to the track to see the performance gains from it yet though...waiting until it gets colder to get the best possible times
__________________
WHO DAT!! ~~~~~~~~~~~~~~~~ 03 DSG Mach 1 5spd IUP Typical Bolt Ons 296hp/331tq?? on MustangDyno?? Best Time:12.83@106 1.72 60ft |
08-08-2011, 06:50 PM | #3 |
Registered User
Join Date: Feb 2008
Location: Cowtown, Alberta
Posts: 1,261
|
Re: How does everyone like their aluminum flywheels?
Just like driving a civic. LOL
__________________
Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works. SAE 378RWHP ,302 ft/lbs 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE |
08-08-2011, 06:51 PM | #4 |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: How does everyone like their aluminum flywheels?
I'm looking at a Fidanza, I don't know of one with less weight. I was wondering about the performance gains.
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
08-08-2011, 07:16 PM | #5 |
On Permanant Vacation
Join Date: Feb 2004
Location: McVeytown, PA
Posts: 5,015
|
Re: How does everyone like their aluminum flywheels?
I have a Ford Racing aluminum flywheel and I like it a lot.
__________________
And then one day you find, 10 years have got behind you, no one told you when to run, you missed the starting gun.. 18 Shelby GT 350 04 Mach 1 (Sold 9/1/2018 ) 18 Ford Explorer XLT 17 Mustang GT/CS Convertible 16 Fusion SE AWD Ecoboost 10 Fusion SE V6 66 289 Mustang Hardtop Restomod |
08-08-2011, 07:32 PM | #6 |
Torque wins!
Join Date: Dec 2004
Location: Florida
Posts: 13,167
|
Re: How does everyone like their aluminum flywheels?
It's awesome.
__________________
The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno |
08-08-2011, 07:42 PM | #7 |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: How does everyone like their aluminum flywheels?
Lethal has an ACT one that looks super light but then I go to ACT's site and it says there isn't one for our car.
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
08-08-2011, 07:43 PM | #8 |
Greg Fonger
Join Date: May 2004
Location: Ontario, Canada
Posts: 3,416
|
Re: How does everyone like their aluminum flywheels?
Do some research on this, if you are drag racing you may want to stay with the iron wheel. It will spin up faster and is lighter but can fall on its face if you do not launch it hard. A bit tricky as it may bog on you. I am sure some will chime in on this.
I have an aluminium flywheel and found this out after I switched it out. Are you switching out your clutch as well? |
08-08-2011, 07:45 PM | #9 |
occasional user
Join Date: Oct 2009
Location: Hood cnty TX
Posts: 927
|
Re: How does everyone like their aluminum flywheels?
Got a spec aluminum flywheel and stage 2 clutch. I Like the flywheel but cant say I would use a spec clutch again.
__________________
03 dsg 5spd P1SC and stuff. Tuned at Gearheads. |
08-08-2011, 07:52 PM | #10 | |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: How does everyone like their aluminum flywheels?
Quote:
Yes, 03 Cobra PP with Mcleod disc
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
|
08-08-2011, 07:55 PM | #11 |
Registered User
Join Date: Mar 2008
Location: Jersey Shore
Posts: 1,349
|
Re: How does everyone like their aluminum flywheels?
I have the Fidanza Alum FW and I think its great. Its a lil harder to launch but worth every penny IMO! I DD my car
|
08-08-2011, 08:16 PM | #12 |
Crewchief
Join Date: May 2007
Location: Ft. Lewis, Wa
Posts: 546
|
Re: How does everyone like their aluminum flywheels?
i have the ACT 14.3lb wheel from lethal, i effin love it
__________________
I'm the guy who does his job. You must be the other guy... 15T Blackhawk Mechanic Extraordinaire BBK 65mm TB SCT x3 Kooks LT, o/r X Mac Catback PSR K w/ D Spec coilovers 2000 Cobra R brakes 275/40/17 F1GSD3 315/35/17 F1GSD3 FR500 wheels 17x9, 17x10.5 Amsoil engine and tranny 4.10 gears ACT 14.3 lb flywheel SPEC clutch FRPP driveshaft C&L full intake w/85mm maf MGW shifter NGK TR55ix 319HP 333TQ at the wheels H&K USP compact .40S&W |
08-08-2011, 08:16 PM | #13 |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: How does everyone like their aluminum flywheels?
Weird, the Fidanza claims to be 12lbs I think
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
08-08-2011, 08:22 PM | #14 |
Dark Knight
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
|
Re: How does everyone like their aluminum flywheels?
If your going to be launching at high rpm's on sticky tires you go with billet steel.
If you DD the car and don't plan to cut low 60ft times, with sticky tires, more power, and high rpms (its not a drag strip car) then aluminum is a great upgrade for DD and roll racing. If you are on a budget, you use the stock nodular iron one.
__________________
Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage |
08-08-2011, 08:29 PM | #15 |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: How does everyone like their aluminum flywheels?
Why do you say this? What makes aluminum bad for the drag strip?
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
08-08-2011, 08:36 PM | #16 |
Registered User
Join Date: Aug 2005
Location: Greenville, SC
Posts: 1,150
|
Re: How does everyone like their aluminum flywheels?
The initial launch is trickier with an aluminum flywheel, since you don't store as much energy with the lighter rotating weight. Once the car is underway, an aluminum flywheel will accelerate quicker, since it isn't taking as much energy to spin the flywheel up at each shift.
|
08-08-2011, 09:02 PM | #17 |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: How does everyone like their aluminum flywheels?
I understand that but alot of things can help with the launch. A few examples would be more gear (ie 4.56s over 4.30s), more air pressure in the tires, higher launch RPM.
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
08-08-2011, 09:13 PM | #18 |
Mach Underhood
Join Date: Jan 2007
Location: FL
Posts: 1,677
|
Re: How does everyone like their aluminum flywheels?
I will never use anything else.
I currently have a fidanza in my car. I also use the Fidanza 4.3 Clutch, it is a beast.
__________________
Stock 4.6 4V, Cobra Cammed: 11.63@117.84 - N/A T45 / 4.56 / Drag Radials - N/A 4V Video |
08-08-2011, 09:30 PM | #19 |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: How does everyone like their aluminum flywheels?
What gears are you running and how would you rate the driveability/hold power of the 4.3 to a 03 Cobra setup?
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
08-08-2011, 09:47 PM | #20 |
Registered User
Join Date: Jul 2007
Location: Knoxville
Posts: 803
|
Re: How does everyone like their aluminum flywheels?
It definetly will let you rev quicker. I put one in when I blew 3rd gear in my tranny and it made launching a bit harder. It really didn't show any differance at the track but I was also learning to race with a 5- speed for the first time.
My tranny has made about a 1000 passes on it since the light weight flywheel al. driveshaft and lightweight spool. I defintly think it will help your drivetrain last longer. |
08-08-2011, 09:50 PM | #21 |
used to be BrianWannaMach
Join Date: Apr 2003
Location: Portland, OR
Posts: 1,468
|
Re: How does everyone like their aluminum flywheels?
I put the Fidanza in my Mach. Unfortunately, I haven't been able to drive it much though. So, I can't give any real impressions yet.
I will say this, have it balanced before you get it installed. I asked my engine builder to do this and I'm glad I did because it was off quite a bit. I think he ended up drill 5 or 6 holes to balance it. I don't know what that equates to in mass, but I have to believe that many holes is significant.
__________________
Brian 03 DSG Mach 1, 5-Spd, w/IUP VIN 387483, Mustang Dyno: 321 rwhp/326 rwtq; 371 rwhp/466 rwtq on 100 shot - old numbers, new numbers pending - See pics of my first 86 SVO - I have two - See pics of my 67 Mustang Fastback w/ 427 Small Block - See pics of my 2003 Mach 1 Web Page, needs update for new motor, etc. - See pics of my wife’s 06 Mustang |
08-08-2011, 10:31 PM | #22 |
"God of Thunder"
Join Date: Jan 2007
Location: DC
Posts: 1,076
|
Re: How does everyone like their aluminum flywheels?
No complaints with the Fidanza.
|
08-08-2011, 10:38 PM | #23 | |
Dark Knight
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
|
Re: How does everyone like their aluminum flywheels?
Quote:
I'd be curious to see a 500hp stang, built rear and tranny, strong clutch, on full slicks launch at redline with an aluminum flywheel and then with a billet steel flywheel.
__________________
Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage |
|
08-08-2011, 11:22 PM | #24 | |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: How does everyone like their aluminum flywheels?
Quote:
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|