Selling Mach parts: 2 Offroad X-Pipes, Mach Hood, SCT Livewire with Mach Tunes

[FieroMan]

Sorry to say that I sold my 2004 Mach 1, but at least it went toward getting a 2011 Mustang GT!

The parts I have;
SOLD--$200 - White Mach 1 hood with widened Mach stripe (replaced in minor accident because of a couple little cracks underneath, but no visible damage or mishaping).


--$120 - BBK Offroad X-pipes - used (scratches, etc, from normal use)


--$100 - GP Offroad X-pipes - two-piece for easier install.


--$399 SCT Livewire tuner - loaded with 3 custom tunes provided by American Muscle. (new Livewires are $560) http://www.americanmuscle.com/sct-li...600-tuner.html

Custom tunes include:
*High Performance tune, Mach in stock form (or with CAI, makes no difference)
*High Performance tune, Mach with X-pipes (O2 sensors shut down)
*Valet tune - with RPM/MPH limit set when others are driving your Mach

[ShakeIt2004]

That X pipe looks like pypes brand. GLWS

[FieroMan]

Thanks, Man, but I think this one is GP X-pipe seen at http://cgi.ebay.com/ebaymotors/GP-X-...esQQxZ46QQyZ18

I'll correct my first post.

Here's the description:

PART #: X9903
APPLICATIONS:
DESCRIPTION:


Application Specific X-Pipes by Greyhound Performance

•Ford Mustang GT, 4.6L V8
•Ford Mustang GTS, 4.6L V8
•Ford Mustang LX, 4.6L V8
•Ford Mustang Cobra, 4.6L V8
•Ford Mustang Mach 1, 4.6L V8
•Steeda, Roush, and Saleen Vehicles
Greyhound Performance makes one of the finest quality X-Pipes on the market today. We have sold thousands of these over the years. Developed from input we have received from a multitude of Mustang speed shops, they represent an emerging power in the crossover pipe industry. Our X-Pipes merge your exhaust pulses at the X to increase scavaging, horse power and torque.
•2.5 in. Mandrel Bent non-restrictive tubing
•For use with shorty or stock headers
•High quality 16-Guage aluminized steel
•Significant increases in Horsepower and Torque 20+HP
•Great Sound
•Comes in 2 pieces for easy installation
•O2 Bosses in correct place
•No O2 extensions needed
•All Hardware included
•Backed by a 1 Year warranty against any and all Manufacturer Defects
•Made in the USA
**When used on automatic transmissions you must leave the bolts loose and tighten, one by one, very slowly so the shifter linkage has plenty of room. When installed in this manner, very slowly, there should be no problems with automatic transmissions.

[FieroMan]

Hood is sold.

[AzureMach03]

I have an sct xcal 3, i wonder if I can transfer my tune from the programmer to that one? If you know that would be great, thanks

[FieroMan]

Where did you get the X3? If you have the USB cable, you should be able to transfer the tune to your computer, then transfer them to the Livewire.

I'd probably trade you tuners for $300 if yours works on the 2011.

[FieroMan]

Still available...

[FieroMan]

Still available...