Massive part out. - Page 2 - 2003-04 Mach 1 Registry Owners Club

RedLiner · 07-14-2010, 10:43 AM

Payment sent for ported intake.

NUMACHI · 07-14-2010, 12:14 PM

I am sure you will get some good gains with that Ben....

Braceyaself, you are looking to get $1400 for the whole fuel system? How much power will this support?

Braceyaself · 07-14-2010, 12:25 PM

Fuel system should support over 800 rwhp and it's 1400 plus 3% paypal plus shipping I have 2500 into this fuel system it's 100%

Braceyaself · 07-15-2010, 08:08 AM

bump

chernandez88 · 07-15-2010, 11:08 AM

Will you sell the tank and fuel pump seperate? Also do you have the voltage controller for the pump?

Braceyaself · 07-15-2010, 01:40 PM

I'll sell that tank sep for 400 sorry no reg for the pump

chernandez88 · 07-15-2010, 11:45 PM

Pm sent

01cobra · 07-17-2010, 10:47 PM

Pm sent

01cobra · 07-18-2010, 03:59 PM

Money sent for spacer.

connormach1 · 07-18-2010, 04:58 PM

how much just for the 80# injectors shipped to 96792

Dan03mach · 07-19-2010, 09:42 PM

Thats a good deal on the TH400 conversion. I just bought basicly everything you have there and have alot more into it then the 3700 you are asking. Do you have the spects of that all is inside the trans? Mine is a Rossler Terminator 3 TH400. What size is the converter? and how much you want for it.

Braceyaself · 07-20-2010, 07:59 AM

It's just a basic upgraded th400 with roller bearings in the tail housing billet foward drum. Reverse manual cable body with t brake. I can't remeber I'm in fl for the moment. I didn't really want to seperate this stuff up it's worth more as a package deal I think. Price is always best offer. I need to sell this stuff so bump it up lol!

mach1metalhead · 07-20-2010, 08:25 AM

Quote:

Originally Posted by Braceyaself

d&d k member a arms coil overs and mm cast camber plates

price? if it brings the price down any, i don't need the camber plates

sideways03 · 07-20-2010, 08:18 PM

Quote:

Originally Posted by Braceyaself

fully built rear with eaton diff

Price if you are willing to ship?

Braceyaself · 07-21-2010, 07:13 AM

I'm not parting out the front suspension just yet the rear I'd like to get 600 plus a stock rear. If your willing to ship yours 1st to me

sideways03 · 07-21-2010, 01:14 PM

Quote:

Originally Posted by Braceyaself

I'm not parting out the front suspension just yet the rear I'd like to get 600 plus a stock rear. If your willing to ship yours 1st to me

My rear isn't stock. It's built and has c-clip eliminators. I'm just trying to get a new rear without the eliminators. Thanks anyways man.

95SC · 07-21-2010, 01:16 PM

Full Fuel system,Glenns sleeper tank,80# injectors prolite -8 feed -6 return
magnafuel reg,brand new a1000 fuel pump and filter 1400 crp fuel rails

Is this 100% complete kit with all the lines and fittings needed for installation on the car ? Would you sell everything but 80lb injectors , I already have 80's. If so how much without injectors ,I'm very interested in this system.

thanks,
Derek

connormach1 · 07-21-2010, 11:17 PM

would u like to sell the 80lb injectors

Braceyaself · 07-23-2010, 07:34 AM

Yes for 300 if the other guy buys the rest of the fuel system

chernandez88 · 07-26-2010, 12:02 AM

PM sent

neversatisfied · 07-28-2010, 07:14 PM

PM sent

Braceyaself · 07-28-2010, 10:41 PM

Sorry man never got your pm?

SHAKERRR · 08-19-2010, 09:08 PM

Do you still have the roll bar/cage and which MM model is it?

04Mach1Blurr · 08-20-2010, 09:44 AM

How much for the front suspension

devous1 · 08-21-2010, 05:40 PM

I'm also interested in the cage if you could post a little more info on it.

07-14-2010, 10:43 AM	#26
RedLiner Line Lock Wussy Join Date: Dec 2005 Location: Martinsburg, WV Posts: 1,258	Re: Massive part out. Payment sent for ported intake. __________________ 2001 DHG Bullitt -Patiently awaiting Coyote swap

07-14-2010, 12:14 PM	#27
NUMACHI R CODE Join Date: Mar 2004 Location: Hagerstown, Maryland Posts: 1,087	Re: Massive part out. I am sure you will get some good gains with that Ben.... Braceyaself, you are looking to get $1400 for the whole fuel system? How much power will this support? __________________ 2003 Azure Blue Mach 5 Speed, IUP - - - - - - - - - - - - - - - - - - - - ALMOST STOCK

07-14-2010, 12:25 PM	#28
Braceyaself Registered User Join Date: Mar 2006 Location: wolcott,ct Posts: 1,598	Re: Massive part out. Fuel system should support over 800 rwhp and it's 1400 plus 3% paypal plus shipping I have 2500 into this fuel system it's 100% __________________ X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126 Last edited by Braceyaself; 07-14-2010 at 12:49 PM.

07-15-2010, 08:08 AM	#29
Braceyaself Registered User Join Date: Mar 2006 Location: wolcott,ct Posts: 1,598	Re: Massive part out. bump __________________ X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126

07-15-2010, 11:08 AM	#30
chernandez88 Registered User Join Date: Apr 2007 Location: Miami, FL Posts: 510	Re: Massive part out. Will you sell the tank and fuel pump seperate? Also do you have the voltage controller for the pump? __________________ 2004-Torch Red 5 Speed W/ IUP Single 74mm Borg Warner S400 980HP-925TQ @ 25.8PSI & 15 degree Timing

07-15-2010, 01:40 PM	#31
Braceyaself Registered User Join Date: Mar 2006 Location: wolcott,ct Posts: 1,598	Re: Massive part out. I'll sell that tank sep for 400 sorry no reg for the pump __________________ X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126

07-15-2010, 11:45 PM	#32
chernandez88 Registered User Join Date: Apr 2007 Location: Miami, FL Posts: 510	Re: Massive part out. Pm sent __________________ 2004-Torch Red 5 Speed W/ IUP Single 74mm Borg Warner S400 980HP-925TQ @ 25.8PSI & 15 degree Timing

07-17-2010, 10:47 PM	#33
01cobra Registered User Join Date: Nov 2009 Location: Chester County, PA Posts: 330	Re: Massive part out. Pm sent __________________ 2003 Cobra

07-18-2010, 03:59 PM	#34
01cobra Registered User Join Date: Nov 2009 Location: Chester County, PA Posts: 330	Re: Massive part out. Money sent for spacer. __________________ 2003 Cobra

07-18-2010, 04:58 PM	#35
connormach1 Registered User Join Date: Jul 2009 Location: WARRENTON MO Posts: 25	Re: Massive part out. how much just for the 80# injectors shipped to 96792

07-19-2010, 09:42 PM	#36
Dan03mach Spool'n UP Join Date: Nov 2003 Location: DFW TX Posts: 3,952	Re: Massive part out. Thats a good deal on the TH400 conversion. I just bought basicly everything you have there and have alot more into it then the 3700 you are asking. Do you have the spects of that all is inside the trans? Mine is a Rossler Terminator 3 TH400. What size is the converter? and how much you want for it. __________________ 03 Dark Shadow Grey Mach1 "SMOKEY" *"SLOW STREET CAR"* Mods: Turbocharged 9 Sec. Slow Street Car

07-20-2010, 07:59 AM	#37
Braceyaself Registered User Join Date: Mar 2006 Location: wolcott,ct Posts: 1,598	Re: Massive part out. It's just a basic upgraded th400 with roller bearings in the tail housing billet foward drum. Reverse manual cable body with t brake. I can't remeber I'm in fl for the moment. I didn't really want to seperate this stuff up it's worth more as a package deal I think. Price is always best offer. I need to sell this stuff so bump it up lol! __________________ X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126

07-21-2010, 07:13 AM	#40
Braceyaself Registered User Join Date: Mar 2006 Location: wolcott,ct Posts: 1,598	Re: Massive part out. I'm not parting out the front suspension just yet the rear I'd like to get 600 plus a stock rear. If your willing to ship yours 1st to me __________________ X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126

07-21-2010, 01:16 PM	#42
95SC Registered User Join Date: Jan 2010 Location: IL Posts: 106	Re: Massive part out. Full Fuel system,Glenns sleeper tank,80# injectors prolite -8 feed -6 return magnafuel reg,brand new a1000 fuel pump and filter 1400 crp fuel rails Is this 100% complete kit with all the lines and fittings needed for installation on the car ? Would you sell everything but 80lb injectors , I already have 80's. If so how much without injectors ,I'm very interested in this system. thanks, Derek

07-21-2010, 11:17 PM	#43
connormach1 Registered User Join Date: Jul 2009 Location: WARRENTON MO Posts: 25	Re: Massive part out. would u like to sell the 80lb injectors

07-23-2010, 07:34 AM	#44
Braceyaself Registered User Join Date: Mar 2006 Location: wolcott,ct Posts: 1,598	Re: Massive part out. Yes for 300 if the other guy buys the rest of the fuel system __________________ X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126

07-26-2010, 12:02 AM	#45
chernandez88 Registered User Join Date: Apr 2007 Location: Miami, FL Posts: 510	Re: Massive part out. PM sent __________________ 2004-Torch Red 5 Speed W/ IUP Single 74mm Borg Warner S400 980HP-925TQ @ 25.8PSI & 15 degree Timing

07-28-2010, 07:14 PM	#46
neversatisfied Registered User Join Date: Nov 2004 Location: melbourne, fl Posts: 390	Re: Massive part out. PM sent __________________ 04 Oxford White Mach 1

07-28-2010, 10:41 PM	#47
Braceyaself Registered User Join Date: Mar 2006 Location: wolcott,ct Posts: 1,598	Re: Massive part out. Sorry man never got your pm? __________________ X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126

08-19-2010, 09:08 PM	#48
SHAKERRR Registered User Join Date: Oct 2006 Location: Poughkeepsie, NY Posts: 446	Re: Massive part out. Do you still have the roll bar/cage and which MM model is it? __________________ 2003 Mach 1 (Black) ATI PSC1 9# 3-Core Intercooler 62mm BBK TB K&N Airfilter FR 42# Injectors Focus Fuel Pump KB Boost-A-Pump Full SS Bassani Ex. Diablo MAFia Steeda TriAx Shifter Stewart Gauges AEM Air/Fuel Gauge Eibach Sportlines MM Panhardbar SLP Linelock AFS 17x10.5 Mach1 315/35/17 BFG Drag Radials Stock Internals Conservative Tune 438hp/405tq

08-20-2010, 09:44 AM	#49
04Mach1Blurr Machinator Join Date: Jul 2008 Location: Leesburg, VA Posts: 2,294	Re: Massive part out. How much for the front suspension __________________ 2004 D.S.G. Mach 1 Mustang I.U.P.(01/22/2004)-04 Cobra Longblock- Posi Ported M122 GT500 Blower - BF 2.93 Upper - 4lb Lower -MGW STS-Bassani cattless X pipe- Borla Stinger Catback-Steeda Bump Steer kit-MM CCs- MM Coilovers 350lb spring- LFP Heat-exchanger- 1inch Shaker Spacer-03 Cobra IRS with FTBR's Full Bushings kit-BF Diff Brace-3:55 gears -T56 Tranzilla- cut 04 coupe rear springs-Viper Remote Start/Alarm system-Ipod Auxilary-SLP LL-Tune coming soon

08-21-2010, 05:40 PM	#50
devous1 Chairman of "The Bored" Join Date: Sep 2004 Location: A CORNFIELD IN OH Posts: 2,001	Re: Massive part out. I'm also interested in the cage if you could post a little more info on it. __________________ 2014 GT500 Black/Black 03 TORCH RED MACH V7 YSI and Some Other Stuff 03 DSG MACH 90 Kenny Brown Super LX 89 LX BBF as seen on Pinks 5/11-SOLD 11 F450 Lariat A Couple Tuber Buells

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)