WTB - Mach1 Intake Manifold - 2003-04 Mach 1 Registry Owners Club

lucheski · 04-05-2010, 12:54 PM

03 Cobra going turbo....need the intake manifold... can be just the lower

birdman941 · 04-05-2010, 01:01 PM

Get ahold of member LOOKnGO or Roy,
Roy might have one ported, which is a good thing for a turbo.
If not, buy one from LOOKnGO and have Roy port it.

95SC · 04-05-2010, 02:09 PM

I have a new 01 Cobra lower

1bad67mustang · 04-05-2010, 05:47 PM

i have one of a mach 1 that was taken off when it went to the eaton swap. has 38,000 miles on it

rugs04mach · 04-05-2010, 08:40 PM

i have an 04 with 11k miles

4-v mach · 04-05-2010, 08:44 PM

i have an extra lower. what are you willing to pay?

lucheski · 04-06-2010, 11:45 AM

Quote:

Originally Posted by rugs04mach

i have an 04 with 11k miles

What are you asking? Do you have pics? feel free to PM me Thanks

lucheski · 04-06-2010, 11:46 AM

Quote:

Originally Posted by 4-v mach

i have an extra lower. what are you willing to pay?

What are you asking?

4-v mach · 04-06-2010, 05:58 PM

Quote:

Originally Posted by lucheski

What are you asking?

i'm really not sure what they are going for these days as i have been off the forums for quite some time...

ModularSpeed · 04-06-2010, 06:10 PM

I have one.

I'll do $390 shipped.

Intake lid has been partially (mostly) polished....by the previous owner who had a Mach 1.

I will cut open, port and reweld for additional $375.

Kelly

gfong · 04-06-2010, 06:16 PM

Sent you a pm.

04-05-2010, 12:54 PM	#1
lucheski Registered User Join Date: Apr 2010 Location: Ford Lauderdale, FL Posts: 16	WTB - Mach1 Intake Manifold 03 Cobra going turbo....need the intake manifold... can be just the lower

04-05-2010, 01:01 PM	#2
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: WTB - Mach1 Intake Manifold Get ahold of member LOOKnGO or Roy, Roy might have one ported, which is a good thing for a turbo. If not, buy one from LOOKnGO and have Roy port it. __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

04-05-2010, 02:09 PM	#3
95SC Registered User Join Date: Jan 2010 Location: IL Posts: 106	Re: WTB - Mach1 Intake Manifold I have a new 01 Cobra lower

04-05-2010, 05:47 PM	#4
1bad67mustang Registered User Join Date: Jan 2009 Location: Houston, Texas Posts: 454	Re: WTB - Mach1 Intake Manifold i have one of a mach 1 that was taken off when it went to the eaton swap. has 38,000 miles on it

04-05-2010, 08:40 PM	#5
rugs04mach Registered User Join Date: Apr 2006 Location: Long Valley, New Jersey Posts: 253	Re: WTB - Mach1 Intake Manifold i have an 04 with 11k miles __________________ Eibach Pro Kit springs Silver FR500 18x9 18x10 265/35/18 295/35/18 Vredestein's MGW shifter Borla Stinger cat back cobra mirrors Aluminator/Kenne-Bell American Racing headers/catted x pipe Mcleod RXT twin disc Built TR3650 by Astro Performance tuned by Chris Rose

04-05-2010, 08:44 PM	#6
4-v mach Sold & Parting Out Join Date: Oct 2007 Location: Palm Beach Gardens, FL Posts: 1,164	Re: WTB - Mach1 Intake Manifold i have an extra lower. what are you willing to pay? __________________ 04 AB 5sp IUP Every Bolt-On Imaginable Full Tubular Drag Suspension Moser 35-Spline, Spool, C-Elim's, 4.88's, etc. Zex 100 Shot SCT by Justin @ VMP Tuning 15x10 Beadlock & 17x4.5 Aluma-Star 2.0's M/T 28x10.5 ET Drags Massive Diet = 2950 lbs stock: 408hp, 438tq on 100 shot: 11.03 @ 127.3 Aluma-Star's 4 SALE Best Offer Al Papitto built ~11.5:1, .020 over Teksid, custom Comp cams, custom CP domed pistons, ported heads/intake by Kris Starnes 513hp, 410tq on 100 shot: 10.79 @ 133.1

04-06-2010, 06:10 PM	#10
ModularSpeed Mach Underhood Join Date: Jan 2007 Location: FL Posts: 1,677	Re: WTB - Mach1 Intake Manifold I have one. I'll do $390 shipped. Intake lid has been partially (mostly) polished....by the previous owner who had a Mach 1. I will cut open, port and reweld for additional $375. Kelly __________________ Stock 4.6 4V, Cobra Cammed: 11.63@117.84 - N/A T45 / 4.56 / Drag Radials - N/A 4V Video

04-06-2010, 06:16 PM	#11
gfong Greg Fonger Join Date: May 2004 Location: Ontario, Canada Posts: 3,416	Re: WTB - Mach1 Intake Manifold Sent you a pm.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)