Hello! New Mach Owner! - 2003-04 Mach 1 Registry Owners Club

Mighty-d · 11-24-2009, 10:51 AM

SUP DOODS! I hail from the great state of GEORGIA!
I just piurchased a DSG MAch 1, she has everything I been looking for, She has a Vortech w/cooler and been lowered and a few other light mods!
Kong 18" wheels
Steeda Lowering sport springs
JBA full exhaust
Battery relocated to trunk
MTX audio system
Nitto 555 all around
slotted rotors up front

Everyone i talk to on other boards tell me to come here! So i am here! Gald im here. very cool site
here a picture of her.

Con's Mach1 · 11-24-2009, 10:53 AM

Welcome from Acworth!! Hope you enjoy that Mach.

Mighty-d · 11-24-2009, 11:06 AM

Thanks! great board so far! I have heard about checking the heads for a green mark! Or Blue Mark on the driver side! WOW.

Uphill · 11-24-2009, 11:38 AM

Welcome to the Registry from Alabama. Great looking Mach!

Mighty-d · 11-24-2009, 11:46 AM

Quote:

Originally Posted by Uphill

Welcome to the Registry from Alabama. Great looking Mach!

Thanks, WAREAGLE!

gamatt · 11-24-2009, 01:06 PM

Looks nice..and fast!

Welcome from Dacula!

kiler be · 11-24-2009, 01:23 PM

Welcome from Va. Look for blue on the head.

NTMAREMACH · 11-24-2009, 04:06 PM

Welcome from Massachusetts

73mach03 · 11-24-2009, 04:25 PM

Welcome from NY.

UmachnMe? · 11-24-2009, 04:34 PM

Greetings from SC.... moved here from Canton. Used to live on Main Street. (had a teal 93 cobra then)

wiz_of_wuz · 11-24-2009, 04:36 PM

Welcome from Michigan

11-24-2009, 04:42 PM

Welcome from Idaho.

gfong · 11-24-2009, 05:03 PM

Welcome aboard!

hoodley · 11-24-2009, 05:05 PM

Welcome, Im new too, from augusta,GA.
THATS A PUURRRRDY CAR MANE.

wannamach1 · 11-24-2009, 07:22 PM

Welcome and congrats!

jbrad88 · 11-24-2009, 07:32 PM

Welcome

Boss6T7 · 11-24-2009, 08:15 PM

Welcome from Kansas.

machinu04 · 11-25-2009, 12:02 PM

Welcome from Tn.

24kmach · 11-25-2009, 07:20 PM

Welcome from Tacoma, Washington.

Mighty-d · 11-25-2009, 10:09 PM

Quote:

Originally Posted by kiler be

Welcome from Va. Look for blue on the head.

Why?I need to understand this?
I hear if it blue..good?
Green BAD?

I actully got the heads off now, she smoked! dealer agreed to fix it. heads are at a machine shop. Said exhaust seals looked bad, the valve guides or seals? real loose, they stated they are going to replace all the valves and guides and basically rebuild the heads.

Mighty-d · 11-25-2009, 10:09 PM

Thanks for the warm welcome!

Mighty-d · 11-25-2009, 10:10 PM

Quote:

Originally Posted by hoodley

Welcome, Im new too, from augusta,GA.
THATS A PUURRRRDY CAR MANE.

Thanks

Azure Blurr · 11-25-2009, 10:16 PM

Welcome from just down the road.

Mighty-d · 11-26-2009, 09:52 AM

Quote:

Originally Posted by Azure Blurr

Welcome from just down the road.

Didnt realize so many folks where here from around the states, and GA too!

blk 04 mach 1 · 11-26-2009, 10:44 AM

welcome from yet another texan!

11-24-2009, 10:51 AM	#1
Mighty-d Registered User Join Date: Nov 2009 Location: Canton, GA Posts: 120	Hello! New Mach Owner! SUP DOODS! I hail from the great state of GEORGIA! I just piurchased a DSG MAch 1, she has everything I been looking for, She has a Vortech w/cooler and been lowered and a few other light mods! Kong 18" wheels Steeda Lowering sport springs JBA full exhaust Battery relocated to trunk MTX audio system Nitto 555 all around slotted rotors up front Everyone i talk to on other boards tell me to come here! So i am here! Gald im here. very cool site here a picture of her. Attached Thumbnails __________________ "Speed Matters" Mach 1, 2003 with Vortech! YAHOO! Last edited by Mighty-d; 11-24-2009 at 12:04 PM. Reason: pics

11-24-2009, 10:53 AM	#2
Con's Mach1 Registered User Join Date: Mar 2007 Location: Acworth, Georgia Posts: 2,564	Re: Hello! New Mach Owner! Welcome from Acworth!! Hope you enjoy that Mach.

11-24-2009, 11:06 AM	#3
Mighty-d Registered User Join Date: Nov 2009 Location: Canton, GA Posts: 120	Re: Hello! New Mach Owner! Thanks! great board so far! I have heard about checking the heads for a green mark! Or Blue Mark on the driver side! WOW. __________________ "Speed Matters" Mach 1, 2003 with Vortech! YAHOO! Last edited by Mighty-d; 11-24-2009 at 11:31 AM.

11-24-2009, 11:38 AM	#4
Uphill Registered User Join Date: Nov 2009 Location: Cullman, Alabama Posts: 41	Re: Hello! New Mach Owner! Welcome to the Registry from Alabama. Great looking Mach!

11-24-2009, 01:06 PM	#6
gamatt Mustang Fanatic Join Date: Jun 2009 Location: Dacula, GA Posts: 963	Re: Hello! New Mach Owner! Looks nice..and fast! Welcome from Dacula!

11-24-2009, 01:23 PM	#7
kiler be Registered User Join Date: Jan 2008 Location: culpeper va. Posts: 4,915	Re: Hello! New Mach Owner! Welcome from Va. Look for blue on the head. __________________ 03 Zink Yellow Mach 1 65 Black on Black 2+2 ( owned since High School ) 56 F100 ( dad's truck ) 75 Maverick 6cyl, auto ( Mean Machine )

11-24-2009, 04:06 PM	#8
NTMAREMACH A NITEMARE IN MASS Join Date: May 2009 Location: Ashburnham, Ma Posts: 3,160	Re: Hello! New Mach Owner! Welcome from Massachusetts

11-24-2009, 04:25 PM	#9
73mach03 Registered User Join Date: Aug 2009 Location: HP, NY Posts: 1,720	Re: Hello! New Mach Owner! Welcome from NY. __________________ 2003 Zinc Yellow Mach 1, M5, Bassani Catback 2016 White Subaru WRX, Borla S-Type Catback Red Sox, Raiders, and Electric Guitars

11-24-2009, 04:34 PM	#10
UmachnMe? never ending project Join Date: Dec 2003 Location: Columbia, SC Posts: 605	Re: Hello! New Mach Owner! Greetings from SC.... moved here from Canton. Used to live on Main Street. (had a teal 93 cobra then) __________________ tuned by ProDyno in Fort Mill 540 hp (5200 rpm) 490 tq I/W 15% OD pulley Vortech V2SQ forged S/B by VT performance Cobra tank with twin GT pumps BBK Long Tubes, custom O/R X w/ magnaflow mufflers 18"x9" AFS Mach 1 wheels Dimpled and slotted rotors MM front coil over kit with Bilstein HD struts MM adjustable LCAs and adjustable pan hard bar MM hd torque arm /removed factory upper arms Rebuilt 3650 / new syncros and shifter forks / Hurst BP RAM HD 950 dual disk clutch and FRP alum d/s

11-24-2009, 04:36 PM	#11
wiz_of_wuz chillin' by the Lake Join Date: Dec 2007 Location: Holland,MI Posts: 502	Re: Hello! New Mach Owner! Welcome from Michigan __________________ "Hell Yes your Fast! You were hauling a$$ when i passed you!" B-Day 4/13/04 MRT H Mid with Cats Magnaflow Cat back Steeda Triax Shifter FRPP Aluminum Driveshaft FRPP 4:10 Rears http://i12.photobucket.com/albums/a2...z/DSC05124.jpg

11-24-2009, 04:42 PM	#12
nikbait Guest Posts: n/a	Re: Hello! New Mach Owner! Welcome from Idaho.

11-24-2009, 05:03 PM	#13
gfong Greg Fonger Join Date: May 2004 Location: Ontario, Canada Posts: 3,416	Re: Hello! New Mach Owner! Welcome aboard!

11-24-2009, 05:05 PM	#14
hoodley Drive it like U stole it! Join Date: Nov 2009 Location: augusta, ga Posts: 83	Re: Hello! New Mach Owner! Welcome, Im new too, from augusta,GA. THATS A PUURRRRDY CAR MANE.

11-24-2009, 07:22 PM	#15
wannamach1 finallygottamach1 Join Date: Dec 2008 Location: Martinsville,VA Posts: 259	Re: Hello! New Mach Owner! Welcome and congrats! __________________ finallygottamach1

11-24-2009, 07:32 PM	#16
jbrad88 Original Owner Join Date: Apr 2003 Location: Houston, Texas Posts: 5,172	Re: Hello! New Mach Owner! Welcome __________________ JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars

11-24-2009, 08:15 PM	#17
Boss6T7 Registered User Join Date: Jun 2007 Location: Castle Rock, CO Posts: 438	Re: Hello! New Mach Owner! Welcome from Kansas. __________________ 2003 Black Mach 1 automatic, IUP Born 6/20/03 PHP intake spacer, FRPP alum drive shaft MRT H-pipe w/cats, SLP LM2 catback Lowered-Hotchkis cc, Steeda kit, Vogtland springs MGW & UPR accessories, Baer drilled/slotted rotors NGK Iridium TR55IX plugs,TCI tranny pan IAC restrictor plate, 3.90 rear gears Vortec V-2 SQ SCI-TRIM Dynojet: 403 RWHP, 377 RWTQ 6.5 psi boost 1967 Coupe Born 9/13/66 369 Dart Block Stroker, nitrous

11-25-2009, 12:02 PM	#18
machinu04 Registered User Join Date: Apr 2009 Location: Clarksville Tn. Posts: 67	Re: Hello! New Mach Owner! Welcome from Tn. __________________ 04 Black Mach 1 Diablosport Tuner K&N CAI SLP Catted X Pipe Borla Stinger Catback Hurst S.T. Shifter Bullitt DD Rims

11-25-2009, 07:20 PM	#19
24kmach My First Mach, Jan. 1969 Join Date: Jan 2005 Location: Tacoma, Washington Posts: 13,070	Re: Hello! New Mach Owner! Welcome from Tacoma, Washington. __________________ I couldn't repair your brakes, so I made your horn louder. Mach 1 owner since January 1969. First ride in a P51D August 28,2010. Member Based in Kent, Washington, Pacific Cascade Mustang Club is the only original Mustang club in the Puget Sound Area and according to Mustang Club of America, we are the oldest in the nation.

11-25-2009, 10:09 PM	#21
Mighty-d Registered User Join Date: Nov 2009 Location: Canton, GA Posts: 120	Re: Hello! New Mach Owner! Thanks for the warm welcome! __________________ "Speed Matters" Mach 1, 2003 with Vortech! YAHOO!

11-25-2009, 10:16 PM	#23
Azure Blurr I miss my friend Join Date: Jul 2006 Location: Middle Georgia Posts: 6,020	Re: Hello! New Mach Owner! Welcome from just down the road.

11-26-2009, 10:44 AM	#25
blk 04 mach 1 Registered User Join Date: Dec 2008 Location: Hallsville Texas Posts: 953	Re: Hello! New Mach Owner! welcome from yet another texan!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)