|
|
Power Adders Superchargers, Turbos, Nitrous, etc... |
|
Thread Tools | Display Modes |
08-28-2008, 08:57 PM | #26 |
Registered User
Join Date: Jun 2005
Location: houston (spring), TX
Posts: 60
|
Re: procharged mach1 dyno with nitrous
by the time the n2o hits you should be makin more tq then hp.. what size shot are you running and what was the dyno with just the blower? i dont think you'll double ur hp numbers but you will def see pretty close to double the torque.. which is what i loved on mine!
|
08-28-2008, 10:14 PM | #27 |
Registered User
Join Date: Dec 2005
Location: Herndon, VA
Posts: 541
|
Re: procharged mach1 dyno with nitrous
Just a heads up for those responding still, just saw this on svtperformance. Looks like that motor didn't make it http://www.svtperformance.com/forums...d.php?t=519504 Sorry to hear the luck, something sure wasn't right there.
__________________
2004 Torch Red Mach 1! Eaton Swapped 8psi SLP Longtube Headers SLP Catted Shorty X SLP Powerflo Catback JLT RAI Intake SCT Tune on 4bank chip Nitto DR 275/40/17 MM Lower Control Arms MM Urethane Rack Bushings Hawk HPS Pads w/ MM brake lines MM Full Length Subframes Steeda Tri-ax Sirius For Sale! |
08-28-2008, 10:28 PM | #28 |
Registered User
Join Date: Mar 2006
Location: wolcott,ct
Posts: 1,598
|
Re: procharged mach1 dyno with nitrous
eh im pretty sure thats 2 different people one says there from tn.and there other from nh same name 2 differen people..Alsot the person who blew up was running a turbo set up....
__________________
X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126 |
08-28-2008, 11:26 PM | #29 |
Got boost?
Join Date: Feb 2006
Location: New Jersey
Posts: 1,343
|
Re: procharged mach1 dyno with nitrous
Def not the same people....You guys really need to read.
__________________
03 mach - White 5spd IUP Born 6-9-03 Powered by Procharger 450rwhp 417rwtq |
08-29-2008, 01:48 AM | #30 |
Guest
Join Date: Jun 2004
Location: NH
Posts: 1,309
|
Re: procharged mach1 dyno with nitrous
haha thanks at least someone was.....im fully built no worries......dyno on boost is in the sig 540rwhp 9psi p1sc with slip.....
this nitrous dyno is on pump gas with torco accell.(should =104 octane) the shot will be starting with 35 then 50 and possibly 75 but i doubt it.....75 is the max on my kit. btw im not the dipsh*t ls1killer from svtperf.... im fastbacon over there....(that kid runs a 2v gt....thats really bad readn haha) |
08-29-2008, 01:49 AM | #31 | |
Guest
Join Date: Jun 2004
Location: NH
Posts: 1,309
|
Re: procharged mach1 dyno with nitrous
Quote:
|
|
08-30-2008, 02:57 AM | #32 |
Registered User
Join Date: Dec 2005
Location: Herndon, VA
Posts: 541
|
Re: procharged mach1 dyno with nitrous
My mistake guys, didn't take the time to read it through. Glad that wasn't your setup. When ya heading in for the numbers?
__________________
2004 Torch Red Mach 1! Eaton Swapped 8psi SLP Longtube Headers SLP Catted Shorty X SLP Powerflo Catback JLT RAI Intake SCT Tune on 4bank chip Nitto DR 275/40/17 MM Lower Control Arms MM Urethane Rack Bushings Hawk HPS Pads w/ MM brake lines MM Full Length Subframes Steeda Tri-ax Sirius For Sale! |
08-30-2008, 11:09 AM | #33 |
Guest
Join Date: Jun 2004
Location: NH
Posts: 1,309
|
Re: procharged mach1 dyno with nitrous
any time this week the dyno tuner can take me.....he tunes on his own time as a hobby....so its hard to get on with him.....theres usually a wait..lol
|
09-10-2008, 10:03 PM | #34 |
Registered User
Join Date: Oct 2006
Location: Huntingtown, MD
Posts: 92
|
Re: procharged mach1 dyno with nitrous
I will call BS on your 540HP w/a P1 at 9 psi. I have done way to many procharger installs for that number dream on. You might get it with the 50 shoot and that is a maybe. If you think you have 540 I would love to see a time slip not a inflated dyno sheet. So you are telling me you have a P1 making 9psi on a mach1 running mid to high 10's?
__________________
02 GT Built stroker 4V W/F1A procharger T56 6 speed 10.61 @ 131 |
09-11-2008, 12:32 PM | #35 | |
Line Lock Wussy
Join Date: Dec 2005
Location: Martinsburg, WV
Posts: 1,258
|
Re: procharged mach1 dyno with nitrous
Quote:
__________________
2001 DHG Bullitt -Patiently awaiting Coyote swap |
|
11-18-2008, 02:26 PM | #37 | |
Registered User
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
|
Re: procharged mach1 dyno with nitrous
Quote:
I can see these numbers being true since he has much better heads and better cams than I did. Now what I do not understand is belt slippage with 9psi of boost.
__________________
03 white Mach1 JLT RAI | 1/2 spacer | Catback | 4.56s 7.76@87.8mph |
|
11-18-2008, 03:49 PM | #39 | |
Got boost?
Join Date: Feb 2006
Location: New Jersey
Posts: 1,343
|
Re: procharged mach1 dyno with nitrous
Quote:
__________________
03 mach - White 5spd IUP Born 6-9-03 Powered by Procharger 450rwhp 417rwtq |
|
11-18-2008, 09:23 PM | #40 |
LS What?
Join Date: Jul 2004
Location: CA
Posts: 2,508
|
Re: procharged mach1 dyno with nitrous
Very nice. pm sent.
|
11-19-2008, 12:18 PM | #41 |
Registered User
Join Date: May 2004
Location: SOUTHERN CALIFORNIA
Posts: 1,081
|
Re: procharged mach1 dyno with nitrous
OK, I'll man up and say it. You guys are full of shyte, There is no way you are making that much power, you are full of bullshyte....Guess what, My KB was making 570 to the wheels, I had it retuned, added an extra 1lb of boost and now it is making 699 to the wheels on 87 octane. Wow, I just gained and extra 129 hp in 2 seconds of typing.
__________________
MMR-950 5.0 STROKER PORT/POLISH-FRPP RACING CAMS KB 2.1 15LBS 570RWHP 550RWTQ (SAE) LDC COOLING MOD, DAVIS WP, 8-RIB BELT TKO 600 .82OD 3.55 GEARS EATON POSI/31 SPLINE AXLES COBRA TANK/PUMPS, SCT-2800 MAF, BAP 60LB INJ, FORE FUEL RAILS, -8AN FUEL LINE BASSANI HEADERS/X-PIPE CANTON 7QT PAN MM TUBULAR K-MEMBER/PANHARD BAR ALUMINUM D.S./FLYWHEEL BILSTEIN SPORT VALVE COILOVERS 4-PISTON BREMBO CALIPERS/ROTORS 18X9/18X10 CHROME BULLITS/NITTO DR'S 2001 COBRA FRONT COVER RET Tune |
11-19-2008, 01:39 PM | #42 |
Registered User
Join Date: Oct 2008
Location: Bloomington, IL
Posts: 100
|
Re: procharged mach1 dyno with nitrous
I had a P1 on my 89 with edelbrock performer heads and a GT40 intake.
At 14 PSI that car made 485 hp at the wheels. With a NX 50 shot it made 515 hp at the wheels (going very rich). It did gain 80 ft lbs of torque down low, but minimal gains at the peak. I don't see why 550 hp is a stretch at all. A cammed 4V should be making 350 at the wheels. Using simple math 10PSI should give you 350 (25/15) = 583 hp. 13 PSI --> 350 (28/15) = 653 hp Seems very reasonable to me. |
11-19-2008, 02:27 PM | #43 |
Got boost?
Join Date: Feb 2006
Location: New Jersey
Posts: 1,343
|
Re: procharged mach1 dyno with nitrous
Ok you guys have to get a better understanding on compression ratios and how they are affected with boost. Because if It was me being called out in such a rude manner I would be pissed. his 10.1.1 CR at 13 psi is = to 8.5.1 at almost 20psi....So with a little head work and cams which im under the impression that he has his numbers are not all that unrealistic.
__________________
03 mach - White 5spd IUP Born 6-9-03 Powered by Procharger 450rwhp 417rwtq |
11-19-2008, 04:15 PM | #44 |
Registered User
Join Date: Feb 2007
Location: The Woodlands, TX
Posts: 229
|
Re: procharged mach1 dyno with nitrous
lets see some vids of them! sounds sick
__________________
2007 Audi A4 S-line, black/black - daily 2007 GT - wife's daily 2003 TR Mach SOLD! 2003 Sonic Blue Cobra Sold 1970 Grabber Blue Mach -351w (~475hp) -Long tubes -Holley 750dp -MSD 6al, blaster 2, and billet distributor -Roller conversion with Trick Flow twised wedge heads with 2.02/1.60 valves -Comp Cams roller cam, 2.89/2.92 5.13/5.29 split duration cam -4.11 gears |
11-19-2008, 04:25 PM | #45 |
Mach1 member
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
|
Re: procharged mach1 dyno with nitrous
I'd be up for that.
__________________
2011 Mustang GT Grabber Blue Automatic 2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD |
11-19-2008, 04:33 PM | #46 |
Registered User
Join Date: Mar 2006
Location: wolcott,ct
Posts: 1,598
|
Re: procharged mach1 dyno with nitrous
mach day at epping? WHEN AND WHO AM I SPANKING?
__________________
X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126 |
11-20-2008, 12:25 PM | #47 | |
Got boost?
Join Date: Feb 2006
Location: New Jersey
Posts: 1,343
|
Re: procharged mach1 dyno with nitrous
Quote:
__________________
03 mach - White 5spd IUP Born 6-9-03 Powered by Procharger 450rwhp 417rwtq |
|
11-20-2008, 02:22 PM | #48 |
Registered User
Join Date: Mar 2006
Location: wolcott,ct
Posts: 1,598
|
Re: procharged mach1 dyno with nitrous
i got my cage ready, But ill get kicked more then likely for needing an 8-10 point lol.
__________________
X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|