procharged mach1 dyno with nitrous - 2003-04 Mach 1 Registry Owners Club

ls1 killer · 08-17-2008, 05:44 PM

hopefully should have this dynoed this week on a 50 shot...kit is an nx wet kit...

if anyone has any info on blown n02 injected cars id love to hear it.....im vert interested to see what it will put down as well...

540rwhp at 9psi with a lot of slip...i hopefully will break 600,but im not sure

Scott McClure · 08-17-2008, 05:45 PM

Good luck.

ls1 killer · 08-17-2008, 06:47 PM

im not to worried...i suppose worse case i could run 16 more psi.....maybe then i could...lmao

Scott McClure · 08-17-2008, 07:47 PM

Sorry if it sounded negative. I really meant good luck.

Awd This · 08-17-2008, 10:40 PM

Good luck, When did you get forged? Guess I missed alot.

ls1 killer · 08-18-2008, 03:17 AM

Quote:

Originally Posted by Scott McClure

Sorry if it sounded negative. I really meant good luck.

thanks man lol and for awd i blew it ski high last year and had the motor top to bottom build from steen racing being that when i blew it up a few pieces made it up top and screwed up the heads, so i just ended up doing everything....

set up is similar to cmylxgo just with a lot less rwhp lmao.....it has the 10.1:1 cr motor.....because of the centrifugal blower

the tuner is telling me that with the blower you almost see double the shot.....50=100 so thats what im not really sure about.....im sure it will def. get a colder intake charge though.

Beefy Nugz · 08-18-2008, 02:20 PM

Nice #'s. Is that a P1 or D1?

04azuremach · 08-18-2008, 02:23 PM

You're getting slip at 9 PSI? Guess I'm screwed when I run 15 LOL

ls1 killer · 08-18-2008, 02:43 PM

its a p1sc.....im thinking of just doing the d1sc and putting the 4.0 pulley on.......i just dont want to blow a belt.....

whatching my gauge boost is peaking at 5800....then it slips and read 8 eventhough i was told 9 by the dyno all the way to 7k

04azuremach · 08-18-2008, 02:46 PM

What size pulley is on the P1 to make 9 psi? 6 rib?

beerformeplz · 08-18-2008, 03:11 PM

Good luck with the Steen motor.

ls1 killer · 08-18-2008, 08:32 PM

Quote:

Originally Posted by beerformeplz

Good luck with the Steen motor.

haha why would you say that..lol it was taken apart and re - built up in new england just to make sure what was paid for was done.....it was perfect.....

did you have a bad expieriance??

beerformeplz · 08-18-2008, 09:13 PM

Quote:

Originally Posted by ls1 killer

haha why would you say that..lol it was taken apart and re - built up in new england just to make sure what was paid for was done.....it was perfect.....

did you have a bad expieriance??

Sucks to pay for a motor and then have to have someone check it out.

ls1 killer · 08-18-2008, 10:21 PM

Quote:

Originally Posted by beerformeplz

Sucks to pay for a motor and then have to have someone check it out.

it was free to get it done and was worth the piece of mind....i wouldnt buy a built motor without doing that 1st

beerformeplz · 08-20-2008, 10:08 AM

I didnt see anywhere if you had head work and cams also? That seems like alot of hp for only 9#s.

ls1 killer · 08-20-2008, 02:44 PM

Quote:

Originally Posted by beerformeplz

I didnt see anywhere if you had head work and cams also? That seems like alot of hp for only 9#s.

the hp is actually low for the setup but yes the heads are done as well as the cams..

04azuremach · 08-20-2008, 02:46 PM

Quote:

Originally Posted by ls1 killer

the hp is actually low for the setup but yes the heads are done as well as the cams..

What is your setup, btw?

ls1 killer · 08-20-2008, 05:57 PM

Quote:

Originally Posted by 04azuremach

What is your setup, btw?

stock compression, ported heads, xtreme energy cams...works well surprisingly

04azuremach · 08-20-2008, 05:58 PM

Quote:

Originally Posted by ls1 killer

stock compression, ported heads, xtreme energy cams...works well surprisingly

****!! You've definitely given me high hopes for my project then!

ls1 killer · 08-20-2008, 07:39 PM

Quote:

Originally Posted by 04azuremach

****!! You've definitely given me high hopes for my project then!

gotta love it with 15psi and a baby shot you could be close to 700 at the wheels...

Madmax305 · 08-21-2008, 06:55 PM

Quote:

Originally Posted by beerformeplz

I didnt see anywhere if you had head work and cams also? That seems like alot of hp for only 9#s.

I second that!

ls1 killer · 08-21-2008, 07:41 PM

Quote:

Originally Posted by Madmax305

I second that!

now you know and knowing is half the battle......GI.........

ragu1585 · 08-28-2008, 08:10 AM

theres alot of negative people in here it sounds like!

anywayz how did the nitrous work out for you.. i had a 50 shot on my cobra with a ported eaton.. made 55hp and 95ft lbs..

ls1 killer · 08-28-2008, 03:57 PM

yes there are.....dyno is supposed to be this coming week.....i just finished my digital window switch and plug in bottle heater.....

just need to fill the bottle and tune it....also using the torco accelerator during the dyno so i hope that helps.....

im hoping for 600hp if i can pull it off and 500 ft pounds....but im pretty excited to see how it works out.....great kit none the less

sideways03 · 08-28-2008, 04:29 PM

Will you be running pump gas with the nitrous?

08-17-2008, 05:44 PM	#1
ls1 killer Guest Join Date: Jun 2004 Location: NH Posts: 1,309	procharged mach1 dyno with nitrous hopefully should have this dynoed this week on a 50 shot...kit is an nx wet kit... if anyone has any info on blown n02 injected cars id love to hear it.....im vert interested to see what it will put down as well... 540rwhp at 9psi with a lot of slip...i hopefully will break 600,but im not sure

08-17-2008, 05:45 PM	#2
Scott McClure Mach1 member Join Date: Aug 2003 Location: East Haven, CT Posts: 3,349	Re: procharged mach1 dyno with nitrous Good luck. __________________ 2011 Mustang GT Grabber Blue Automatic 2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD

08-17-2008, 06:47 PM	#3
ls1 killer Guest Join Date: Jun 2004 Location: NH Posts: 1,309	Re: procharged mach1 dyno with nitrous im not to worried...i suppose worse case i could run 16 more psi.....maybe then i could...lmao

08-17-2008, 07:47 PM	#4
Scott McClure Mach1 member Join Date: Aug 2003 Location: East Haven, CT Posts: 3,349	Re: procharged mach1 dyno with nitrous Sorry if it sounded negative. I really meant good luck. __________________ 2011 Mustang GT Grabber Blue Automatic 2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD

08-17-2008, 10:40 PM	#5
Awd This Got boost? Join Date: Feb 2006 Location: New Jersey Posts: 1,343	Re: procharged mach1 dyno with nitrous Good luck, When did you get forged? Guess I missed alot. __________________ 03 mach - White 5spd IUP Born 6-9-03 Powered by Procharger 450rwhp 417rwtq

08-18-2008, 02:20 PM	#7
Beefy Nugz Registered User Join Date: Jan 2007 Location: St. Louis, MO Posts: 531	Re: procharged mach1 dyno with nitrous Nice #'s. Is that a P1 or D1? __________________ SOME KENNY BROWN CHASSIS AND SUSP. COMPONENTS 4:10'S MAC LONG TUBES WITH O/R-X AND MAGNA FLOWS. ORANGE BLAST P/P INTAKE W/ SPACER PSR K-MEMBER WITH A-ARMS AND COILOVERS P1SC 9LBS. 422HP - 390TQ 11'S AND COUNTING

08-18-2008, 02:23 PM	#8
04azuremach Loud, fast and fun Join Date: Apr 2004 Location: Owning Ricers at MIR Posts: 7,864	Re: procharged mach1 dyno with nitrous You're getting slip at 9 PSI? Guess I'm screwed when I run 15 LOL

08-18-2008, 02:43 PM	#9
ls1 killer Guest Join Date: Jun 2004 Location: NH Posts: 1,309	Re: procharged mach1 dyno with nitrous its a p1sc.....im thinking of just doing the d1sc and putting the 4.0 pulley on.......i just dont want to blow a belt..... whatching my gauge boost is peaking at 5800....then it slips and read 8 eventhough i was told 9 by the dyno all the way to 7k

08-18-2008, 02:46 PM	#10
04azuremach Loud, fast and fun Join Date: Apr 2004 Location: Owning Ricers at MIR Posts: 7,864	Re: procharged mach1 dyno with nitrous What size pulley is on the P1 to make 9 psi? 6 rib?

08-18-2008, 03:11 PM	#11
beerformeplz Roll Tide ! Join Date: May 2004 Location: Richmond Posts: 2,491	Re: procharged mach1 dyno with nitrous Good luck with the Steen motor. __________________ "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. " - Thomas Jefferson

08-20-2008, 10:08 AM	#15
beerformeplz Roll Tide ! Join Date: May 2004 Location: Richmond Posts: 2,491	Re: procharged mach1 dyno with nitrous I didnt see anywhere if you had head work and cams also? That seems like alot of hp for only 9#s. __________________ "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. " - Thomas Jefferson

08-28-2008, 08:10 AM	#23
ragu1585 Registered User Join Date: Jun 2005 Location: houston (spring), TX Posts: 60	Re: procharged mach1 dyno with nitrous theres alot of negative people in here it sounds like! anywayz how did the nitrous work out for you.. i had a 50 shot on my cobra with a ported eaton.. made 55hp and 95ft lbs..

08-28-2008, 03:57 PM	#24
ls1 killer Guest Join Date: Jun 2004 Location: NH Posts: 1,309	Re: procharged mach1 dyno with nitrous yes there are.....dyno is supposed to be this coming week.....i just finished my digital window switch and plug in bottle heater..... just need to fill the bottle and tune it....also using the torco accelerator during the dyno so i hope that helps..... im hoping for 600hp if i can pull it off and 500 ft pounds....but im pretty excited to see how it works out.....great kit none the less

08-28-2008, 04:29 PM	#25
sideways03 LS What? Join Date: Jul 2004 Location: CA Posts: 2,508	Re: procharged mach1 dyno with nitrous Will you be running pump gas with the nitrous? __________________ Black 03 Mach 1 FOR SALE

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)