FS: Lots of stock Parts some aftermarket - 2003-04 Mach 1 Registry Owners Club

dontmockthemach · 05-08-2008, 12:44 AM

I have the complete intake system, from shaker to throttlebody, not including the shaker. I have the throttle body - to - airbox corked with a #10 from lowes, worked great for me, but you could remove and put in the air jug as well. Also included is the stock filter, which is in great shape, and a k & n filter I bought from vic on here. I never used it, was the wrong one. Asking 100+ shipping obo

I also have the stock shifter from the car and shift knob. Make offer, + shipping

Stock catback- make offer, buyer pays shipping. I will get a quote to whoever is interested.

Sparetire/Jack combo asking 130 shipped

Magnaflow 3.5 inch slash cut style exhaust tips with hangers. Make offer

Stock Front bumper, slight dent on front right side, probably could use repainting. Normal rock and bug chips. Black, with foglights or clear euro fogs, your choice if available. Asking 50 + shipping

Foglights euro style- make offer. The plastic over one bolt hole in back cracked, I glued on a washer in place and it lined up and worked fine until I removed them. Make offer

ZEX Nitrous Spark Plugs, make offer. Suckers were expensive but I have no use for them anymore. Want them out of here. Set of 8, probably less than 1000 miles

If I can think of anything else I have lying around, I will post it up. Open to trades, just let me know. Thanks

dontmockthemach · 05-09-2008, 12:51 PM

Also have the Stock maf housing that can be included with the shaker tubing stuff

dontmockthemach · 05-19-2008, 12:49 PM

Make offers if you must, need this stuff gone

mach1mustangman · 05-19-2008, 03:39 PM

Can you post me some pics of the exhaust tips. I'm very interested in them.

JMACH · 05-20-2008, 12:20 AM

Would you happen to have the pipe that goes from the shaker to the air filter? Pm me if so... Been lookin for one for a while.

dontmockthemach · 05-20-2008, 01:39 PM

exhaust tips

dontmockthemach · 05-20-2008, 01:40 PM

they could def. use a clean up, but they are in great shape. no dents or dings to be found

mach1mustangman · 05-20-2008, 09:11 PM

The inside of them measure 2 1/2" right? Could you measure the length of them for me, so I can get an idea of how they might fit the car?

dontmockthemach · 05-25-2008, 01:45 AM

they are about 14.5 inches at the begging of the slant, and about 15.5 towards the top, being the longest part. Yes, inlet of pipe is 2.5 inches

TransAxle · 05-25-2008, 11:34 PM

you have the stock TB?

creeper46l · 05-26-2008, 02:12 PM

is the stock catback cut?

dontmockthemach · 05-31-2008, 12:17 PM

Catback is cut, I was told a muffler shop could install the connecting pipe to put it back together. Its the only way to remove it

I do not have the stock tb.

The pipe that goes from the shaker to the air box is sold

dontmockthemach · 06-05-2008, 12:24 PM

Also have the factory shaker mounting bracket

05-09-2008, 12:51 PM	#2
dontmockthemach Black Pearl Join Date: Oct 2006 Location: Okinawa, Japan Posts: 765	Re: FS: Lots of stock Parts some aftermarket Also have the Stock maf housing that can be included with the shaker tubing stuff __________________ *Procharged Black 03*

05-19-2008, 12:49 PM	#3
dontmockthemach Black Pearl Join Date: Oct 2006 Location: Okinawa, Japan Posts: 765	Re: FS: Lots of stock Parts some aftermarket Make offers if you must, need this stuff gone __________________ *Procharged Black 03*

05-19-2008, 03:39 PM	#4
mach1mustangman Registered User Join Date: Feb 2008 Location: Etowah, NC Posts: 108	Re: FS: Lots of stock Parts some aftermarket Can you post me some pics of the exhaust tips. I'm very interested in them. Last edited by mach1mustangman; 05-19-2008 at 03:59 PM.

05-20-2008, 12:20 AM	#5
JMACH Registered User Join Date: Apr 2008 Location: Houston, TX Posts: 60	Re: FS: Lots of stock Parts some aftermarket Would you happen to have the pipe that goes from the shaker to the air filter? Pm me if so... Been lookin for one for a while.

05-20-2008, 01:39 PM	#6
dontmockthemach Black Pearl Join Date: Oct 2006 Location: Okinawa, Japan Posts: 765	Re: FS: Lots of stock Parts some aftermarket exhaust tips Attached Thumbnails __________________ *Procharged Black 03*

05-08-2008, 12:44 AM	#1
dontmockthemach Black Pearl Join Date: Oct 2006 Location: Okinawa, Japan Posts: 765	FS: Lots of stock Parts some aftermarket I have the complete intake system, from shaker to throttlebody, not including the shaker. I have the throttle body - to - airbox corked with a #10 from lowes, worked great for me, but you could remove and put in the air jug as well. Also included is the stock filter, which is in great shape, and a k & n filter I bought from vic on here. I never used it, was the wrong one. Asking 100+ shipping obo I also have the stock shifter from the car and shift knob. Make offer, + shipping Stock catback- make offer, buyer pays shipping. I will get a quote to whoever is interested. Sparetire/Jack combo asking 130 shipped Magnaflow 3.5 inch slash cut style exhaust tips with hangers. Make offer Stock Front bumper, slight dent on front right side, probably could use repainting. Normal rock and bug chips. Black, with foglights or clear euro fogs, your choice if available. Asking 50 + shipping Foglights euro style- make offer. The plastic over one bolt hole in back cracked, I glued on a washer in place and it lined up and worked fine until I removed them. Make offer ZEX Nitrous Spark Plugs, make offer. Suckers were expensive but I have no use for them anymore. Want them out of here. Set of 8, probably less than 1000 miles If I can think of anything else I have lying around, I will post it up. Open to trades, just let me know. Thanks __________________ *Procharged Black 03*

05-20-2008, 01:40 PM	#7
dontmockthemach Black Pearl Join Date: Oct 2006 Location: Okinawa, Japan Posts: 765	Re: FS: Lots of stock Parts some aftermarket they could def. use a clean up, but they are in great shape. no dents or dings to be found __________________ *Procharged Black 03*

05-20-2008, 09:11 PM	#8
mach1mustangman Registered User Join Date: Feb 2008 Location: Etowah, NC Posts: 108	Re: FS: Lots of stock Parts some aftermarket The inside of them measure 2 1/2" right? Could you measure the length of them for me, so I can get an idea of how they might fit the car?

05-25-2008, 01:45 AM	#9
dontmockthemach Black Pearl Join Date: Oct 2006 Location: Okinawa, Japan Posts: 765	Re: FS: Lots of stock Parts some aftermarket they are about 14.5 inches at the begging of the slant, and about 15.5 towards the top, being the longest part. Yes, inlet of pipe is 2.5 inches __________________ *Procharged Black 03*

05-25-2008, 11:34 PM	#10
TransAxle Registered User Join Date: Feb 2008 Location: Buford, GA Posts: 332	Re: FS: Lots of stock Parts some aftermarket you have the stock TB? __________________ 2003 Torch Red Mach 1 - 5spd - C&L Inlet Pipe, K&N Drop in Intake, 85mm MAF, Diablo Predator Programmer, Pro5.0 Shifter, Spec Stage 2 Clutch, Steel Flywheel, Roys P&P Intake Manifold, Roys Intake Spacer, Magnaflow Tru-x X-Pipe, Magnaflow Magnapack Cat-Back, Tokico Gas Struts, Eibach Springs

05-26-2008, 02:12 PM	#11
creeper46l This scoop sucks Join Date: Mar 2004 Location: Bremen, IN Posts: 383	Re: FS: Lots of stock Parts some aftermarket is the stock catback cut? __________________ 2012 BOSS 302 2010 FLEX ecoboost

05-31-2008, 12:17 PM	#12
dontmockthemach Black Pearl Join Date: Oct 2006 Location: Okinawa, Japan Posts: 765	Re: FS: Lots of stock Parts some aftermarket Catback is cut, I was told a muffler shop could install the connecting pipe to put it back together. Its the only way to remove it I do not have the stock tb. The pipe that goes from the shaker to the air box is sold __________________ *Procharged Black 03*

06-05-2008, 12:24 PM	#13
dontmockthemach Black Pearl Join Date: Oct 2006 Location: Okinawa, Japan Posts: 765	Re: FS: Lots of stock Parts some aftermarket Also have the factory shaker mounting bracket __________________ *Procharged Black 03*

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)