Re: Insert Your Exhaust Sound Clips Here
|
Re: Insert Your Exhaust Sound Clips Here
2003 Mach 1, 5-speed
Headers: Stock Mid Pipe: Mac O/R H pipe Cat-back: Mac SS Cat-back w/ 3.5" tips http://www.youtube.com/watch?v=qZgF68X3kZY |
Re: Insert Your Exhaust Sound Clips Here
Mac long tubes, Mac prochamber, Mac mufflers & tail pipes, Magnaflow 4 inch rolled tips. All SS.
http://www.youtube.com/watch?v=KTNVqfVhxO0 |
Re: Insert Your Exhaust Sound Clips Here
|
Re: Insert Your Exhaust Sound Clips Here
How much was your set-up? Where you get the Pypes X from? Thanks.
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
Quote:
I'd say about $500 total, give or take some. That includes having the mufflers welded in. Of course it would be cheaper buying an o/r x-pipe. I also have some handmade 4" stainless tips. |
Re: Insert Your Exhaust Sound Clips Here
Pypes O/R X pipe and stock mufflers
Just bought a Borla Stinger cat-back on ebay tonight so I'll have sound clips of that soon. http://www.youtube.com/watch?v=2BFTPnLvA-g |
Re: Insert Your Exhaust Sound Clips Here
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
Quote:
I'm thinking about picking up a HD camera, and if so I'll be making new videos including some interior, I've had a handful of people ask about it. |
Re: Insert Your Exhaust Sound Clips Here
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
Where did you buy the Pypes X & Mac cb from? Still lookinh for the cheapest place so I can finish my exhaust. Thanks
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
I bought the c/b from a website that is no longer up anymore, that was in 2006, don't know where's cheapest now. Bought the X from RPMoutlet, though they have raised the price now, I got it for 150 shipped. It's like 190 now. I'd get a X off ebay, either pypes or UPR. Last I checked you could get a new one for around 150-160 shipped (UPR or Pypes)
|
Re: Insert Your Exhaust Sound Clips Here
I seen those Pypes on ebay. I guess the newer MAC cb are aluminized steel? Bot sure if better/worse than ss. Thanks.
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
There should be aluminized and ss available, aluminized is cheaper than SS. Mine is aluminized with the black coating. SS is "better", though it really depends on where you live and the conditions in which you drive the car. If your area is known for rust, you drive in snow, road salt, a lot of rain, live by the ocean, etc, then SS has a better chance to survive longer.
|
Re: Insert Your Exhaust Sound Clips Here
Quote:
check out brenspeed.com thats where i got my pypes catted x and mac catback. |
Re: Insert Your Exhaust Sound Clips Here
Cool, I'm in Ewa also, who did your install when you received your exhaust?
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
i installed it myself and it wasnt fun. the x pipe and the mac came in six pieces. i had trouble aligning the thing under jackstands. plus i had to saw off the stock exhaust by hand. in the end i had it all together but it still didnt align correctly. the x pipe was low and scraping the speed bumps. so i took it to exhaust systems hawaii. they charged me 100 just to align the pipes.
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
I thought about going thru ESH. Otherwise Henry Tabios in Ewa. Thanks.
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
headers= stock
midpipe= Pypes o/r x catback= stock tailpipes/Hooker Maximum flow mufflers/4" tips REVS AND DRIVE |
Re: Insert Your Exhaust Sound Clips Here
Headers- stock
Midpipe- stock catback- Magnapack http://s81.photobucket.com/albums/j2...ent=Before.flv Headers- stock Midpipe- Magnaflow catted catback- Magnapack http://s81.photobucket.com/albums/j2...rent=After.flv |
Re: Insert Your Exhaust Sound Clips Here
kinda of a long vid its got some friends cars on it but here my clip of my exhaust mac cb pypes catted x
http://www.youtube.com/watch?v=_cJYDoF1RWA |
Re: Insert Your Exhaust Sound Clips Here
Here's a new clip. It's not actually new, but I re-edited some older clips trying to get better quality now that youtube has the higher quality playback. So you have to be logged into youtube for the high quality. Not sure it's much different, maybe a little clearer sound and picture. I think I'm getting a HD camera soon.
http://youtube.com/watch?v=eLI4hLJm0mY Pypes O/R X and Mac cat-back |
Re: Insert Your Exhaust Sound Clips Here
Here are updated ones.
Headers: American Racing Long Tube Headers Midpipe: American Racing Off-Road X Catback: Stainless Steel Systems Dyno1(no tune): http://www.youtube.com/watch?v=o_lQF-NYkbo Dyno2(no tune, slightly longer video): http://www.youtube.com/watch?v=RTMfM_YvGKY&feature=user Short Drive-by(don't mind friends fag music): http://s9.photobucket.com/albums/a87...t=100_0520.flv |
Re: Insert Your Exhaust Sound Clips Here
Sounds great.
How is the ground clearance with the American Racing headers? Also do you think they are wide enough to get an auto trans out without pulling a header. |
Re: Insert Your Exhaust Sound Clips Here
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
anybody have a clip of a full bassani exhaust. bassani midlengths, bassani catted/ o/r x pipe, and bassani catback?
also interested in bassani mids, bassani x-pipe and mac catback, or bassani mids, mac h-pipe, and borla catback |
Re: Insert Your Exhaust Sound Clips Here
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
I thought i would make a couple video clips of our car's side exhaust incase anyone's interested in a similar setup. The setup we have is stock headers, cats, flowmaster mufflers, and then the pipes return towards the front and then turn out.
This first clip is just of a start-up rev/idle. http://i6.photobucket.com/albums/y23...h_100_1356.jpg This clip is of a drive-by. http://i6.photobucket.com/albums/y23...h_100_1358.jpg And this clip is of takeoff. http://i6.photobucket.com/albums/y23...h_100_1357.jpg |
Re: Insert Your Exhaust Sound Clips Here
sounds good. That can't be azure blue???
|
Re: Insert Your Exhaust Sound Clips Here
It aint. It's bright atlantic blue.
|
Re: Insert Your Exhaust Sound Clips Here
oo, looks really good man!
|
Re: Insert Your Exhaust Sound Clips Here
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
its a true mach 1.
|
Re: Insert Your Exhaust Sound Clips Here
Wow, I always wanted to see what a Bright Atlantic Blue mach would look like... and it's amazing :) nicely done. What was the original color?
|
Re: Insert Your Exhaust Sound Clips Here
It was originally Azure Blue.
|
Re: Insert Your Exhaust Sound Clips Here
does anyone by chance have a clip of their mach w/ stock manifolds, stock mid pipe and mac cat back? considering this or slp lm1's. thanks
|
Re: Insert Your Exhaust Sound Clips Here
On you tube 1MeanStang is supposed to be that set-up. Or just search Mach 1 exhaust and you'll find it. I recently installed Mac 2 1/2" Stainless steel CB but w/off road xpipes. Sh*t is loud!! But having some fitment issues with the driver side set-up, banging the underbody. Still trying to tweek it to fit right in fact. It does sound really good though. I think I should have gone SLP LM1. Mine drones loud at cruising speed, 2000 rpm's.
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
Headers: Stock
Mid-Pipe: Bassani o/r X Cat Back: Bassani Stainless Steal http://s69.photobucket.com/albums/i5...t=MOV06960.flv |
Re: Insert Your Exhaust Sound Clips Here
03 Azure Blue mach 1
-Stock Headers -Stock H-Pipe -Spintech Pro-Streets welded in. http://www.youtube.com/watch?v=ntNIsn8TdCA Catted X-Pipe coming soon |
Re: Insert Your Exhaust Sound Clips Here
anyone have mac lts, mac CATTED h, and flowmasters?
or mac lts, mac catted h, and mac catback? |
Re: Insert Your Exhaust Sound Clips Here
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
Anyone have a stock Mach 1 setup with just a UPR X-Pipe?
|
Re: Insert Your Exhaust Sound Clips Here
Quote:
http://www.youtube.com/watch?v=2BFTPnLvA-g |
Re: Insert Your Exhaust Sound Clips Here
heres BETTIE!!!!!
manafolds: SLP long tubes mid pipe: SLP O/R X-pipe cat-back: SPINTECH Super Pro Streets http://www.youtube.com/watch?v=qaMQkalMkoI |
Re: Insert Your Exhaust Sound Clips Here
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
Alright, thanks guys. How about this, does anyone have a MAC catback system. The one I'm looking for has an item number of TK8604. Like just that alone. No mid pipe or anything else.
|
Re: Insert Your Exhaust Sound Clips Here
Quote:
|
Re: Insert Your Exhaust Sound Clips Here
Looking for...
O/R H-Pipe Single Chamber Flows Thanks! |
Re: Insert Your Exhaust Sound Clips Here
No new exhaust for me, but wanted to put up my HD video now that youtube plays HD
Pypes X Mac catback Click watch in HD if your computer can handle it. http://www.youtube.com/watch?v=226FujL3Pnw |
All times are GMT -4. The time now is 04:31 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com