Insert Your Exhaust Sound Clips Here - 2003-04 Mach 1 Registry Owners Club

Orange whip 04 · 04-25-2006, 01:07 AM

Maybe it would be easy if everyone was to just submit your sound clips all under this post and have a moderator sticky this for us so we can find it fast when we need to find a certain exhaust setup ? Just give a brief listing of your setup and link to your clip. Easy as pie.

P.S. Be specific on your setup... example

Headers: Stock
Mid pipe: SLP offroad X
Cat back: SLP loudmouth1 resonators

black_mach_03 · 04-25-2006, 07:41 AM

JBA Mid-length headers
JBA catted H-pipe
No mufflers/piping stops at the rear axle/turndowns
Bunch of vacuum lines disconnected

idle/rev 6000 rpm

http://videos.streetfire.net/search/...1F3159D5C9.htm

mgk2 · 04-25-2006, 09:30 AM

I found the video clarity excelent, sorry there was some wind flutter. I too choose the stainless steel bumper inserts for my blue Mach 1. I am very anxious to receive and install my Kooks headers and catted x-pipe to mate to my Borla stingers.
I hope to post also!
Mike

Orange whip 04 · 04-25-2006, 11:09 PM

Is this post worth a sticky Moderators ?

So our sound clips dont get lost. They will always be near the top for the future which will provide quick access to the links. Thanks

Orange whip 04 · 04-26-2006, 12:10 AM

These clips are irrelavant to the 4.6 4 valve, but for those of you inquiring of 5.0 liter exhaust sounds i thought i would throw this in for you. This is what the SLP cat back sounds like on a 5.0.

Headers - stock

Mid pipe - MAC Offroad H-pipe

Cat back - SLP Loudmouth 1 Resonators (1987-93 GT systems use part number SLP-31016).

Idle/Rev- http://www.stangnet.com/media/slp_idel_rev.mp3

Take off- http://www.stangnet.com/media/slp_takeoff.mp3

Inside- http://www.stangnet.com/media/slp_inside.mp3

Orange whip 04 · 04-26-2006, 12:34 AM

Brought to you by fas4d.

Headers - Stock

Mid pipe - MAC offroad H pipe

Cat back - Stock pipe with cut in Flowmasters.

http://videos.streetfire.net/video/E...B2F0E0ECD6.htm

Orange whip 04 · 04-26-2006, 12:42 AM

Brought to you by Mach1nut

Headers - stock

Mid pipe - Bassani offroad X pipe

Cat back - Flowmasters Delta Flow 40's welded in.

http://videos.streetfire.net/Player....6-17D9C94EAD8B

Orange whip 04 · 04-26-2006, 12:58 AM

Brought to you by Mach1nut - A before and after prespective.

Headers - stock

Mid pipe - Factory cats

Cat back - Factory stock

After

Headers - stock

Mid pipe - Bassani Catted X-pipe

Cat back - Flowmasters Delta flow 40 series

http://videos.streetfire.net/video/E...93F2E093D1.htm

Orange whip 04 · 04-26-2006, 01:27 AM

Brought to you by black mach 03.

Headers - JBA Mid-Length Headers

Mid pipe - JBA Catted H-Pipe

Cat back - No Mufflers/Turndowns

http://videos.streetfire.net/player....E-75BBE56293CE

Orange whip 04 · 04-26-2006, 01:33 AM

Brought to you by BlueDevil04

Headers - Hooker Long Tubes

Mid pipe - Hooker shorty O/R X Pipe

Cat back - Single Chamber Flowmasters

http://videos.streetfire.net/Player....E-B87DF6C57B3A

http://videos.streetfire.net/Player....7-26F0E855EC32

http://media.putfile.com/04-Mach-1-3

http://media.putfile.com/04-Mach-1-2

http://media.putfile.com/04-Mach-1

Orange whip 04 · 04-26-2006, 01:50 AM

Brought to you by SPDASND

Headers - Stock

Mid pipe - Bassani Catted X-pipe

Cat back - Borla stingers

http://videos.streetfire.net/video/7...42B411709C.htm

Orange whip 04 · 04-26-2006, 02:04 AM

Brought to you by The Mach Says

Headers - Stock

Mid pipe - Stock

Cat back - Borla Stingers

http://videos.streetfire.net/Player....4-8A0E28769563

Orange whip 04 · 04-26-2006, 02:08 AM

Brought to you by BrianWannaMach

Headers - Stock

Mid pipe - Stock

Cat back - Borla Stingers

http://www.mustang-club.com/OnTheRoad/05mr_thu_1.wmv

Orange whip 04 · 04-26-2006, 02:15 AM

Brought to you by threefitydotcom

Headers - Stock

Mid pipe - Magnaflow Offroad X-pipe

Cat back - Magnaflow (Not the packs)

http://videos.streetfire.net/video/3...E81F0776D8.htm

Orange whip 04 · 04-26-2006, 02:27 AM

Brought to you by J1mJ1m

Headers - Stock

Mid pipe - SLP offroad X-pipe

Cat back - MAC SS system

http://videos.streetfire.net/video/1...0EE127888D.htm

http://videos.streetfire.net/video/1...915B4DD8EC.htm

Orange whip 04 · 04-26-2006, 02:37 AM

Brought to you by instantmassege

Headers - Stock

Mid pipe - MAC Offroad Prochamber

Cat back - Borla Stingers

http://videos.streetfire.net/video/5...7B523E27A9.htm

http://videos.streetfire.net/video/A...DC06D02D20.htm

Orange whip 04 · 04-26-2006, 02:50 AM

Brought to you by DTMach1

Headers - Stock

Mid pipe - MAC Offroad Prochamber

Cat back - SLP loudmouth 1 resonators

http://media.putfile.com/DT23

Orange whip 04 · 04-26-2006, 03:17 AM

Brought to you by BONESTOCK

Headers - Stock

Mid pipe - Bassani Offroad X-pipe

Cat back - Magnaflow ( Not the packs )

http://videos.streetfire.net/video/2...AD536464C9.htm

http://videos.streetfire.net/video/...DE1753CCA3B.htm

Orange whip 04 · 04-26-2006, 02:23 PM

Brought to you by tim03mach

Headers - Stock

Mid pipe - Stock

Cat back - SLP loudmouth 1 Resonators

https://home.comcast.net/~colt1877/slploudmouth.wmv

https://home.comcast.net/~taw596/in_car.wmv

https://home.comcast.net/~taw596/in_car2.wmv

John and Renae · 04-26-2006, 05:17 PM

Headers Stock

Mid-Pipe Stock

Converter Back- Stainless Steel Systems

http://www.eaglewheels.com/sound/adrenaline2.wma

Gunny · 04-26-2006, 10:14 PM

Headers - Stock

Mid-Pipe - MRT Catted H-Pipe

Cat BAck - SLP Loudmouth 1

http://videos.streetfire.net/video/w...BDEEB1E38B.htm

demonspeed98 · 04-26-2006, 11:40 PM

Quote:

Originally Posted by Gunny

Headers - Stock

Mid-Pipe - MRT Catted H-Pipe

Cat BAck - SLP Loudmouth 1

http://media.putfile.com/04-MACH-186

Haha, I just got done ordering a prochamber to go with the SLP kit I'm getting from you. I was looking through clips on the web and came across this one (not knowing it was you), I was like "sweet! That is lous as hell!".

Hopefully the prochamber will sound as good as that MRT H you have!

Orange whip 04 · 04-27-2006, 02:26 PM

Thanks to the moderator Tony for making this a sticky, i think it will benefit us all inquiring about exhaust sounds and furture decissions for our own exhaust systems. Keep the sound/vid clips coming guys/gals. Who needs mustangexhaust dot come eh ??? We got our own now.

Orange whip 04 · 05-01-2006, 12:11 AM

Brought to you by 40mach1

Headers - JBA Shortys

Mid pipe - MRT Catted H-pipe

Cat back - Magnaflow (Magnapacks)

http://media.putfile.com/MRT-1

http://media.putfile.com/MRT-2

Orange whip 04 · 05-02-2006, 03:16 AM

Brought to you by Mustang Exhaust

Headers - Stock

Mid pipe - Magnaflow Catted X-pipe

Cat back - Borla Stinger Cat Back

http://www.mustangexhaust.com/forums...on=play&id=176

04-25-2006, 01:07 AM	#1
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Insert Your Exhaust Sound/Vid Clips Here Maybe it would be easy if everyone was to just submit your sound clips all under this post and have a moderator sticky this for us so we can find it fast when we need to find a certain exhaust setup ? Just give a brief listing of your setup and link to your clip. Easy as pie. P.S. Be specific on your setup... example Headers: Stock Mid pipe: SLP offroad X Cat back: SLP loudmouth1 resonators Last edited by Orange whip 04; 09-23-2006 at 02:24 AM.

04-25-2006, 07:41 AM	#2
black_mach_03 Registered User Join Date: Jan 2004 Location: Tucson, AZ Posts: 433	Re: Insert Your Exhaust Sound Clips Here JBA Mid-length headers JBA catted H-pipe No mufflers/piping stops at the rear axle/turndowns Bunch of vacuum lines disconnected idle/rev 6000 rpm http://videos.streetfire.net/search/...1F3159D5C9.htm __________________ BONE STOCK Last edited by black_mach_03; 05-03-2006 at 04:24 AM.

04-25-2006, 09:30 AM	#3
mgk2 Registered User Join Date: Aug 2002 Location: Pembroke Pines,Fla Posts: 971	Re: Insert Your Exhaust Sound Clips Here I found the video clarity excelent, sorry there was some wind flutter. I too choose the stainless steel bumper inserts for my blue Mach 1. I am very anxious to receive and install my Kooks headers and catted x-pipe to mate to my Borla stingers. I hope to post also! Mike

04-25-2006, 11:09 PM	#4
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Is this post worth a sticky Moderators ? So our sound clips dont get lost. They will always be near the top for the future which will provide quick access to the links. Thanks

04-26-2006, 12:10 AM	#5
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here These clips are irrelavant to the 4.6 4 valve, but for those of you inquiring of 5.0 liter exhaust sounds i thought i would throw this in for you. This is what the SLP cat back sounds like on a 5.0. Headers - stock Mid pipe - MAC Offroad H-pipe Cat back - SLP Loudmouth 1 Resonators (1987-93 GT systems use part number SLP-31016). Idle/Rev- http://www.stangnet.com/media/slp_idel_rev.mp3 Take off- http://www.stangnet.com/media/slp_takeoff.mp3 Inside- http://www.stangnet.com/media/slp_inside.mp3 Last edited by Orange whip 04; 04-26-2006 at 02:52 PM.

04-26-2006, 12:34 AM	#6
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by fas4d. Headers - Stock Mid pipe - MAC offroad H pipe Cat back - Stock pipe with cut in Flowmasters. http://videos.streetfire.net/video/E...B2F0E0ECD6.htm

04-26-2006, 12:42 AM	#7
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by Mach1nut Headers - stock Mid pipe - Bassani offroad X pipe Cat back - Flowmasters Delta Flow 40's welded in. http://videos.streetfire.net/Player....6-17D9C94EAD8B Last edited by Orange whip 04; 04-26-2006 at 02:51 PM.

04-26-2006, 12:58 AM	#8
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by Mach1nut - A before and after prespective. Headers - stock Mid pipe - Factory cats Cat back - Factory stock After Headers - stock Mid pipe - Bassani Catted X-pipe Cat back - Flowmasters Delta flow 40 series http://videos.streetfire.net/video/E...93F2E093D1.htm

04-26-2006, 01:27 AM	#9
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by black mach 03. Headers - JBA Mid-Length Headers Mid pipe - JBA Catted H-Pipe Cat back - No Mufflers/Turndowns http://videos.streetfire.net/player....E-75BBE56293CE

04-26-2006, 01:33 AM	#10
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by BlueDevil04 Headers - Hooker Long Tubes Mid pipe - Hooker shorty O/R X Pipe Cat back - Single Chamber Flowmasters http://videos.streetfire.net/Player....E-B87DF6C57B3A http://videos.streetfire.net/Player....7-26F0E855EC32 http://media.putfile.com/04-Mach-1-3 http://media.putfile.com/04-Mach-1-2 http://media.putfile.com/04-Mach-1

04-26-2006, 01:50 AM	#11
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by SPDASND Headers - Stock Mid pipe - Bassani Catted X-pipe Cat back - Borla stingers http://videos.streetfire.net/video/7...42B411709C.htm

04-26-2006, 02:04 AM	#12
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by The Mach Says Headers - Stock Mid pipe - Stock Cat back - Borla Stingers http://videos.streetfire.net/Player....4-8A0E28769563

04-26-2006, 02:08 AM	#13
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by BrianWannaMach Headers - Stock Mid pipe - Stock Cat back - Borla Stingers http://www.mustang-club.com/OnTheRoad/05mr_thu_1.wmv

04-26-2006, 02:15 AM	#14
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by threefitydotcom Headers - Stock Mid pipe - Magnaflow Offroad X-pipe Cat back - Magnaflow (Not the packs) http://videos.streetfire.net/video/3...E81F0776D8.htm

04-26-2006, 02:27 AM	#15
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by J1mJ1m Headers - Stock Mid pipe - SLP offroad X-pipe Cat back - MAC SS system http://videos.streetfire.net/video/1...0EE127888D.htm http://videos.streetfire.net/video/1...915B4DD8EC.htm

04-26-2006, 02:37 AM	#16
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by instantmassege Headers - Stock Mid pipe - MAC Offroad Prochamber Cat back - Borla Stingers http://videos.streetfire.net/video/5...7B523E27A9.htm http://videos.streetfire.net/video/A...DC06D02D20.htm Last edited by Orange whip 04; 04-26-2006 at 02:50 PM.

04-26-2006, 02:50 AM	#17
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by DTMach1 Headers - Stock Mid pipe - MAC Offroad Prochamber Cat back - SLP loudmouth 1 resonators http://media.putfile.com/DT23 Last edited by Orange whip 04; 04-26-2006 at 02:49 PM.

04-26-2006, 03:17 AM	#18
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by BONESTOCK Headers - Stock Mid pipe - Bassani Offroad X-pipe Cat back - Magnaflow ( Not the packs ) http://videos.streetfire.net/video/2...AD536464C9.htm http://videos.streetfire.net/video/...DE1753CCA3B.htm Last edited by Orange whip 04; 05-02-2006 at 06:42 PM.

04-26-2006, 02:23 PM	#19
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by tim03mach Headers - Stock Mid pipe - Stock Cat back - SLP loudmouth 1 Resonators https://home.comcast.net/~colt1877/slploudmouth.wmv https://home.comcast.net/~taw596/in_car.wmv https://home.comcast.net/~taw596/in_car2.wmv

04-26-2006, 05:17 PM	#20
John and Renae The Blurr Join Date: Apr 2003 Location: Sugarland, Texas Posts: 4,207	Re: Insert Your Exhaust Sound Clips Here Headers Stock Mid-Pipe Stock Converter Back- Stainless Steel Systems http://www.eaglewheels.com/sound/adrenaline2.wma __________________ JB 03 Torch Red Mach 1 Stainless Steel Systems Converter Back 18x9 18x10 Wheel Replicas Magnum 500's Kirban Shifter 4.10's & 31 spline Mosers and 31 Spline Posi (installed by Pyle Bros) Eibach Pro Kit KN Cai Full time now at...

04-27-2006, 02:26 PM	#23
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Thanks to the moderator Tony for making this a sticky, i think it will benefit us all inquiring about exhaust sounds and furture decissions for our own exhaust systems. Keep the sound/vid clips coming guys/gals. Who needs mustangexhaust dot come eh ??? We got our own now.

05-01-2006, 12:11 AM	#24
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by 40mach1 Headers - JBA Shortys Mid pipe - MRT Catted H-pipe Cat back - Magnaflow (Magnapacks) http://media.putfile.com/MRT-1 http://media.putfile.com/MRT-2

05-02-2006, 03:16 AM	#25
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by Mustang Exhaust Headers - Stock Mid pipe - Magnaflow Catted X-pipe Cat back - Borla Stinger Cat Back http://www.mustangexhaust.com/forums...on=play&id=176

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: