Eaton swap set up $1,800 - 2003-04 Mach 1 Registry Owners Club

droptop mach · 06-22-2009, 12:10 AM

Trying to help someone sell this set up. I worked @ Hpp when we installed this on his Mach 1 Now he's going twin turbo. He's a stand up Guy.

http://www.dfwstangs.net/classifieds...=105846&cat=21

Road Racin Mach · 06-22-2009, 12:46 AM

Quote:

Originally Posted by droptop mach

Trying to help someone sell this set up. I worked @ Hpp when we installed this on his Mach 1 Now he's going twin turbo. He's a stand up Guy.

http://www.dfwstangs.net/classifieds...=105846&cat=21

tempting.....how firm is he? do you know the mileage on this setup by chance?

frisko4one5 · 06-22-2009, 01:25 AM

is this 100% complete for a swap?

redmach2K3 · 06-22-2009, 02:57 AM

Yeah whats all needed because I've got cash in hand.

vtecDIS · 06-22-2009, 04:28 AM

great price if complete! wish i had the $$ right now! maybe in a few months!

Silver_Bullet · 06-22-2009, 10:17 AM

I don't see a timing cover

nickster · 06-22-2009, 12:50 PM

still the best deal i have seen on a 98 persent complete kit

Silver_Bullet · 06-22-2009, 01:39 PM

I didn't say it was a bad deal.Just to let everbody know about the timing cover.I think it is a great deal

droptop mach · 06-22-2009, 03:21 PM

Its missing the timing cover

LOOKnGO · 06-22-2009, 03:34 PM

It looks like a clean low mileage kit, maybe see if the harmonic balancer is there, along with both alt brackets (I see one), alt bolt, intercooler pump bracket, P/S hoses, belts, p/s bracket, and the main hard line engine intercooler lines to water manifold, maf. It is a great start kit at a fair price

droptop mach · 06-22-2009, 08:03 PM

I would buy it. But have a list of stuff i NEED to do.

Mach1Marauder · 06-22-2009, 09:45 PM

Actually, the guy is a flake, but if ol' Jeremy states his rep on the actual parts, then it should be ok to buy from.

droptop mach · 06-22-2009, 10:01 PM

Quote:

Originally Posted by Mach1Marauder

Actually, the guy is a flake, but if ol' Jeremy states his rep on the actual parts, then it should be ok to buy from.

How is that BILL? Why even post up some dumb *** ****?

I've been selling Parts and cars for 13 years. My ebay account is nothing buy postives.

<-- Is a stand up Guy.

my fear · 06-22-2009, 10:26 PM

ive bought alot of parts from him to. hes been very stand up to me when i bought parts.

Machstang46 · 06-22-2009, 10:32 PM

Pm sent

droptop mach · 06-22-2009, 10:33 PM

Quote:

Originally Posted by my fear

ive bought alot of parts from him to. hes been very stand up to me when i bought parts.

I am with everyone. These arent My parts I'll give you his # He's not going to rip anyone off.

Bill is just mad cause he banged a Fat ugly old hag on Dfwstangs and i made fun of him lol Dont lie COL.Sanders

LOOKnGO · 06-22-2009, 10:41 PM

Old and Ugly? he is a Hero

droptop mach · 06-22-2009, 10:46 PM

Quote:

Originally Posted by LOOKnGO

Old and Ugly? he is a Hero

Very old and ugly.

Unrealford · 06-22-2009, 10:48 PM

Quote:

Originally Posted by droptop mach

Very old and ugly.

Mach1Marauder · 06-22-2009, 11:21 PM

Quote:

Originally Posted by droptop mach

How is that BILL? Why even post up some dumb *** ****?

I've been selling Parts and cars for 13 years. My ebay account is nothing buy postives.

<-- Is a stand up Guy.

Learn to to read you fatazz tater eater!!!!!!!!!!

Did I say YOU were flakey??????

Quote:

but if ol' Jeremy states his rep on the actual parts, then it should be ok to buy from.

droptop mach · 06-23-2009, 12:09 AM

Chill out Mild Bill.

Mach1Marauder · 06-23-2009, 01:38 AM

Quote:

Originally Posted by droptop mach

Chill out Mild Bill.

If you'd learn to READ taterhead, I wouldn't have to chill and your tardazz wouldn't get edited by the dang language filter.
This isn't DFWstangs.

ASMACH · 06-23-2009, 04:35 PM

is the seller willing to ship it? or is it a local sale only

droptop mach · 06-23-2009, 06:08 PM

I'm sure he'll ship

DWL · 06-28-2009, 03:16 PM

This kit doesn't have the front timing cover, maf, or the harmonic balancer. It does have the Intercooler pump bracket, the alternator, the brackets & bolts for the alt. This post is for Tom who was calling asking about these items.Tom I don't have your # call me if you see this.

06-22-2009, 12:10 AM	#1
droptop mach Registered User Join Date: Mar 2009 Location: Richardson Texas Posts: 200	Eaton swap set up $1,800 Trying to help someone sell this set up. I worked @ Hpp when we installed this on his Mach 1 Now he's going twin turbo. He's a stand up Guy. http://www.dfwstangs.net/classifieds...=105846&cat=21

06-22-2009, 01:25 AM	#3
frisko4one5 2K3MACH Join Date: Nov 2007 Location: San francisco california Posts: 1,199	Re: Eaton swap set up $1,800 is this 100% complete for a swap? __________________ 03 Torch Red Auto IUP 1 of 528 MODS: PERFORMANCE: JLT RAI,Bassani Exhaust ,Roush Subframe Connectors, UPR o/r X-Pipe, Eibach Prokit, Bilstien shocks/struts APPERANCE: Mach 1 ID PLATE, GE "Mach 1 Shaker" Hood Side Stripes,"Ram Air" Shaker Emblems, Sequential Tails,18x9 black 03 cobra rims w/ BGF KDW 275/40's UPR auto shift ball w/ OD, 03 Cobra Spoiler, 03 Cobra Rear, 03 Cobra skirts, 03 Cobra Front 280RWHP / 307RWTQ Tuned by Nextgen

06-22-2009, 02:57 AM	#4
redmach2K3 Registered User Join Date: May 2007 Location: kansas Posts: 558	Re: Eaton swap set up $1,800 Yeah whats all needed because I've got cash in hand. __________________ 2003 Mach 1 Mustang Torch Red 5 Spd slowing putting it together....

06-22-2009, 04:28 AM	#5
vtecDIS hunt'n for chevy's Join Date: May 2006 Location: Southern CA Posts: 583	Re: Eaton swap set up $1,800 great price if complete! wish i had the $$ right now! maybe in a few months! __________________ 2003 Torched Mach1, IUP, 5spd GO: JLT RAI, Hurst Short Shifter, F1 Stage 2 Clutch, Mac o/r H, Bassani SS Catback, EGR/IAC Restrictors, UPR Firewall Adjstr/Quadrant, MMR RSD, HEAR: Power Acoustic BMAF4000D, Boss 3.5 Farad Cap, 8AWG wires, couple of 10" Alpine Type R's @ 1000+ RMS SHOW: Shorty Antenna, 1" Shaker Extension, Eibach Sportlines, Honeycomb Panel, 18" Bullitts 2002 Trans Am WS6 M6. Sold but not forgotten

06-22-2009, 10:17 AM	#6
Silver_Bullet 2003 DSG Mach 1 Join Date: Feb 2005 Location: Orlando,Fl Posts: 132	Re: Eaton swap set up $1,800 I don't see a timing cover __________________ Procharger 60lb injectors 03-04 Cobra gas tank and Cobra pumps 40 amp Kenne bell boost A pump Borla Stinger Cat-Back Exhaust System Mac Durablack O/R Prochamber 4.30 Gears T56 Black anodized locking Mach 1 MGW fuel door 03-04 Cobra mirrors 03-04 Cobra front bumper 03-04 Cobra trunk and spoiler Cobra 10th anniversary seats Mach 1000 audio sound system

06-22-2009, 12:50 PM	#7
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,323	Re: Eaton swap set up $1,800 still the best deal i have seen on a 98 persent complete kit __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,39#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

06-22-2009, 01:39 PM	#8
Silver_Bullet 2003 DSG Mach 1 Join Date: Feb 2005 Location: Orlando,Fl Posts: 132	Re: Eaton swap set up $1,800 I didn't say it was a bad deal.Just to let everbody know about the timing cover.I think it is a great deal __________________ Procharger 60lb injectors 03-04 Cobra gas tank and Cobra pumps 40 amp Kenne bell boost A pump Borla Stinger Cat-Back Exhaust System Mac Durablack O/R Prochamber 4.30 Gears T56 Black anodized locking Mach 1 MGW fuel door 03-04 Cobra mirrors 03-04 Cobra front bumper 03-04 Cobra trunk and spoiler Cobra 10th anniversary seats Mach 1000 audio sound system

06-22-2009, 03:21 PM	#9
droptop mach Registered User Join Date: Mar 2009 Location: Richardson Texas Posts: 200	Re: Eaton swap set up $1,800 Its missing the timing cover

06-22-2009, 03:34 PM	#10
LOOKnGO I BUY MACH & COBRA PARTS Join Date: Dec 2007 Location: Berryville, va Posts: 2,640	Re: Eaton swap set up $1,800 It looks like a clean low mileage kit, maybe see if the harmonic balancer is there, along with both alt brackets (I see one), alt bolt, intercooler pump bracket, P/S hoses, belts, p/s bracket, and the main hard line engine intercooler lines to water manifold, maf. It is a great start kit at a fair price

06-22-2009, 08:03 PM	#11
droptop mach Registered User Join Date: Mar 2009 Location: Richardson Texas Posts: 200	Re: Eaton swap set up $1,800 I would buy it. But have a list of stuff i NEED to do.

06-22-2009, 09:45 PM	#12
Mach1Marauder I see slow people! Join Date: Jun 2003 Location: NOT at HPP Racing!!!!!! Posts: 25,892	Re: Eaton swap set up $1,800 Actually, the guy is a flake, but if ol' Jeremy states his rep on the actual parts, then it should be ok to buy from. __________________ WILD BILL PRO-AMERICAN TorchRed 2003 MACH1 (Louise) "I remember my fallen brothers so that they may live on." "The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants." Thomas Jefferson PERFORMANCE SOLUTION FOR ALL YOUR PERFORMANCE NEEDS CALL: (602) 269-8955

06-22-2009, 10:26 PM	#14
my fear Registered User Join Date: Jun 2007 Location: DALLAS, TX Posts: 301	Re: Eaton swap set up $1,800 ive bought alot of parts from him to. hes been very stand up to me when i bought parts. __________________ 2003 DSG mach 1:best 1/4-12.81 at 106.0 spinin hard out the gate Performance: HPP tuned 313hp and 333tq BBK long tube headers BBK O/R x pipe MAC pro dumps FRPP 4.10 competition stage 2 clutch MGW shifter JLT RAI FIORE quadrant Steeda firewall adjuster Roy's 1/2" intake spacer HPP tuned HPM mega bite jr. upper and lower arms Looks: 17x9 17x10.5 03 cobra wheels 03 cobra side skirts 01 cobra bumper(needs paint) 01 cobra tails lights(fixed yay ) H&R SS springs

06-22-2009, 10:32 PM	#15
Machstang46 Registered User Join Date: Jun 2009 Location: Shelton, CT Posts: 11	Re: Eaton swap set up $1,800 Pm sent

06-22-2009, 10:41 PM	#17
LOOKnGO I BUY MACH & COBRA PARTS Join Date: Dec 2007 Location: Berryville, va Posts: 2,640	Re: Eaton swap set up $1,800 Old and Ugly? he is a Hero

06-23-2009, 12:09 AM	#21
droptop mach Registered User Join Date: Mar 2009 Location: Richardson Texas Posts: 200	Re: Eaton swap set up $1,800 Chill out Mild Bill.

06-23-2009, 04:35 PM	#23
ASMACH Registered User Join Date: Feb 2008 Location: Carbondale IL Posts: 255	Re: Eaton swap set up $1,800 is the seller willing to ship it? or is it a local sale only

06-23-2009, 06:08 PM	#24
droptop mach Registered User Join Date: Mar 2009 Location: Richardson Texas Posts: 200	Re: Eaton swap set up $1,800 I'm sure he'll ship

06-28-2009, 03:16 PM	#25
DWL Registered User Join Date: Oct 2008 Location: dallas Posts: 20	Re: Eaton swap set up $1,800 This kit doesn't have the front timing cover, maf, or the harmonic balancer. It does have the Intercooler pump bracket, the alternator, the brackets & bolts for the alt. This post is for Tom who was calling asking about these items.Tom I don't have your # call me if you see this.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: