|
|
|
|
|
|
|||||||
| Photo Gallery | $ Donations $ | Register | FAQ | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
12-10-2007, 10:23 AM
|
#1 |
|
Registered User
 
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,845
|
Cog Set-up ( Video Clip )
Just a little clip of the mods . No more belt issues going on over here !
http://videos.streetfire.net/video/f...0000a23c9e.htm Cog Idle http://videos.streetfire.net/video/0...0000b5032d.htm
__________________
1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING Last edited by Linumup; 12-10-2007 at 10:56 AM. |
|
|
|
12-10-2007, 10:45 AM
|
#2 |
|
2004 Black Mach1 5-Speed
 
Join Date: Feb 2004
Location: Overland Park, KS
Posts: 375
  |
Re: Cog Set-up ( Video Clip )
That...is just...yummy.
|
|
|
|
|
12-10-2007, 01:23 PM
|
#3 | |
|
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,845
|
Re: Cog Set-up ( Video Clip )
Quote:
__________________
1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING |
|
|
|
|
|
12-10-2007, 01:28 PM
|
#4 |
|
Registered User
 
Join Date: Mar 2006
Location: wolcott,ct
Posts: 1,592
|
Re: Cog Set-up ( Video Clip )
very sexy man, how much is one of them cog belts lol
__________________
X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126 |
|
|
|
12-10-2007, 01:32 PM
|
#5 | |
|
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,845
|
Re: Cog Set-up ( Video Clip )
Quote:
Not much more then i was paying for the 112.5 8 rib actually . About a 100 , but now im not eating them , spitting belt residue all over the motor , but most of all im not replacing belts . Finally .
__________________
1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING |
|
|
|
|
|
12-10-2007, 01:34 PM
|
#6 | |
|
Registered User
Join Date: Mar 2006
Location: wolcott,ct
Posts: 1,592
|
Re: Cog Set-up ( Video Clip )
Quote:
__________________
X cal 2 jannetty racing tuned Turbo mach to many mods to list 9s or bust in 09 10.8@126 |
|
|
|
|
|
12-10-2007, 01:40 PM
|
#7 | |
|
Torque-a-licious
Join Date: Jun 2007
Location: Foster City, CA
Posts: 1,487
|
Re: Cog Set-up ( Video Clip )
Hm, I'd have to say that "yummy" about describes it!
Do you have a dyno vid of the car?
__________________
Cobra motor in. 422/453 Quote:
|
|
|
|
|
|
12-10-2007, 01:58 PM
|
#8 | |
|
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,845
|
Re: Cog Set-up ( Video Clip )
Quote:
__________________
1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING |
|
|
|
|
|
12-10-2007, 04:08 PM
|
#9 | |
|
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,845
|
Re: Cog Set-up ( Video Clip )
Quote:
 
__________________
1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING |
|
|
|
|
|
12-10-2007, 04:39 PM
|
#10 | |
|
CAT MASTA!
Join Date: Jun 2007
Location: Vero Beach, Florida
Posts: 3,160
|
Re: Cog Set-up ( Video Clip )
Quote:
mach sounds sick man!
__________________
04' Torched 6-speed Build Date: 02/25/2004 Eaton Swapped @8psi 416rwhp SAE 380RWTQ SAE Eaton + ET streets = blown stock rear. "AS I DRIVE THROUGH THE VALLEY OF RICE, I SHALL FEAR NO IMPORT. FOR TORQUE ARTE WITH ME." |
|
|
|
|
|
12-10-2007, 05:50 PM
|
#11 |
|
Nazty Performance
 
Join Date: Oct 2004
Location: San Antonio, TX.
Posts: 782
|
Re: Cog Set-up ( Video Clip )
Congrats on the new dyno numbers! Sick!
 Naz |
|
|
|
|
12-10-2007, 06:07 PM
|
#12 |
|
Missing Third!
Join Date: Aug 2006
Location: Sterling,Va
Posts: 913
|
Re: Cog Set-up ( Video Clip )
Nice sounds mean, I cant wait to start up my car with the D1
__________________
2004 Mach1-Sold Forged-D1 10.89@128mph |
|
|
|
|
12-10-2007, 06:41 PM
|
#13 |
|
Registered User
Join Date: May 2004
Location: SOUTHERN CALIFORNIA
Posts: 1,029
|
Re: Cog Set-up ( Video Clip )
Sounds SWEEEEET
__________________
MMR-950 5.0 STROKER PORT/POLISH-FRPP RACING CAMS KB 2.1 15LBS 570RWHP 550RWTQ (SAE) LDC COOLING MOD, DAVIS WP, 8-RIB BELT TKO 600 .82OD 3.55 GEARS EATON POSI/31 SPLINE AXLES COBRA TANK/PUMPS, SCT-2800 MAF, BAP 60LB INJ, FORE FUEL RAILS, -8AN FUEL LINE BASSANI HEADERS/X-PIPE CANTON 7QT PAN MM TUBULAR K-MEMBER/PANHARD BAR ALUMINUM D.S./FLYWHEEL BILSTEIN SPORT VALVE COILOVERS 4-PISTON BREMBO CALIPERS/ROTORS 18X9/18X10 CHROME BULLITS/NITTO DR'S 2001 COBRA FRONT COVER RET Tune |
|
|
|
|
12-10-2007, 06:54 PM
|
#14 | ||||
|
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,845
|
Re: Cog Set-up ( Video Clip )
Quote:
Quote:
Quote:
Quote:
Now all of you see why i wanted to stay with the belt and blower set-up instead of the TT set-up . Totally sounds badazz .
__________________
1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING |
||||
|
|
|
|
12-10-2007, 09:06 PM
|
#15 |
|
Blower Guru
Join Date: Dec 2002
Location: Motor City
Posts: 2,194
 |
Re: Cog Set-up ( Video Clip )
You know...I have my sh!t workin like a champ now...but that setup makes me want to spend money. I need to see that car in person and what is really involved in making it work with my setup. I am actually more interested in the sprag pulley more than anything.
Post some good pics please. -Corey
__________________
YouTube Videos: http://www.youtube.com/slugbitchracing 2003 Mustang Mach 1 AutoMatic (Torch Red) Born On Date: 2.28.03 Vin: 396895 Adoption Date: 9.07.09 Best ET: 9.54 Best MPH: 149.99 Best 60FT: 1.32 All done on 17" Radials |
|
|
|
|
12-11-2007, 12:01 PM
|
#16 | |
|
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,845
|
Re: Cog Set-up ( Video Clip )
Quote:
I know that it saves blower life and relieves stress off the crank . But the Cog is da shizznit ! LMAO The issue you will have is with the coolant piping and accessories to include fan . And the A/C system Here is a few more pics for ya !
__________________
1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING |
|
|
|
|
|
12-16-2007, 10:05 AM
|
#17 |
|
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,845
|
Re: Cog Set-up ( Video Clip )
Went out cruising on Fri.. Temps here were 50+ and sunny . The car is running tremendously . About dang time . Everything was tight and nothing leaking . Best of all no belt slip or breaks . WooHoo !
Im thinking this clutch pulley was a great idea for this set-up . This thing is incredible . Not cheap but keeping my crank in tact . LOL http://www.atiperformanceproducts.co...lley/index.htm
__________________
1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING |
|
|
|
|
12-28-2007, 09:39 AM
|
#18 | |
|
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,845
|
Re: Cog Set-up ( Video Clip )
Quote:
Want to see the final numbers . Still have a good bit left . 1. ) Need you to port my heads 2. ) Switch out my F.I. from 83s to 150s 3.) Switch out my crank cog pulley for 28 psi like i was originally set up for . But switched my blower pulley to a ATI Super pulley now only 23 4. ) Drop in a 300 pill I guess there is another 150 RWHP to be had . But thats only going to happen when ( if ) someone else puts a big number up ?
__________________
1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING |
|
|
|
|
|
12-28-2007, 11:05 AM
|
#19 | |
|
Blower Guru
Join Date: Dec 2002
Location: Motor City
Posts: 2,194
|
Re: Cog Set-up ( Video Clip )
Quote:
-Corey
__________________
YouTube Videos: http://www.youtube.com/slugbitchracing 2003 Mustang Mach 1 AutoMatic (Torch Red) Born On Date: 2.28.03 Vin: 396895 Adoption Date: 9.07.09 Best ET: 9.54 Best MPH: 149.99 Best 60FT: 1.32 All done on 17" Radials |
|
|
|
|
|
12-28-2007, 01:57 PM
|
#20 | |
|
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,845
|
Re: Cog Set-up ( Video Clip )
Quote:
Ill probably just end up sending mine out to be treated . We will see , you never know . One thing for sure an auto will be more traffic friendly for sure . What are you running in yours ?
__________________
1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING |
|
|
|
|
|
12-28-2007, 02:50 PM
|
#21 |
|
Registered User
Join Date: Oct 2006
Location: Poughkeepsie, NY
Posts: 344
|
Re: Cog Set-up ( Video Clip )
Have you run her at the track? Just curious what she'd do. Do you guys (cmylxgo & lynemup) have any video clips of running your cars on the street or track? I hope not... it may make me dump $$$$ into my car again!!!
__________________
2003 Mach 1 (Black) ATI PSC1 9# 3-Core Intercooler 62mm BBK TB K&N Airfilter FR 42# Injectors Focus Fuel Pump KB Boost-A-Pump Full SS Bassani Ex. Diablo MAFia Steeda TriAx Shifter Stewart Gauges AEM Air/Fuel Gauge Eibach Sportlines MM Panhardbar SLP Linelock AFS 17x10.5 Mach1 315/35/17 BFG Drag Radials Stock Internals Conservative Tune 438hp/405tq |
|
|
|
|
12-28-2007, 03:19 PM
|
#22 | |
|
Blower Guru
Join Date: Dec 2002
Location: Motor City
Posts: 2,194
|
Re: Cog Set-up ( Video Clip )
Quote:
http://www.slugbitchracing.com/clips....Winner.v2.wmv Here is a vid of me braking in my Hoosier Drag Radials... http://www.slugbitchracing.com/clips...adial.Test.wmv Here is a vid of me Joy Riding the cars... http://www.slugbitchracing.com/clips/Mach1.Joy.Ride.wmv Here is a vid of my car tooling around on the street... http://www.slugbitchracing.com/clips/Mach1.Fly.By.wmv
__________________
YouTube Videos: http://www.youtube.com/slugbitchracing 2003 Mustang Mach 1 AutoMatic (Torch Red) Born On Date: 2.28.03 Vin: 396895 Adoption Date: 9.07.09 Best ET: 9.54 Best MPH: 149.99 Best 60FT: 1.32 All done on 17" Radials |
|
|
|
|
|
12-28-2007, 03:21 PM
|
#23 | |
|
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 1,641
|
Re: Cog Set-up ( Video Clip )
Quote:
__________________
2004 mach 1-procharged 302 stroker being built.....John at MP. http://idsserver.net/modularperformance/ want to buy a F1a..PM me if anyone sees one up for sale. http://www.youtube.com/watch?v=dFo_61ocFLc |
|
|
|
|
|
12-28-2007, 03:27 PM
|
#24 | |
|
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,845
|
Re: Cog Set-up ( Video Clip )
Quote:
 I so need someone to cruise with and video . Sweet Man ! Looks like a scary neighborhood though ? 
__________________
1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING |
|
|
|
|
|
12-29-2007, 12:17 AM
|
#25 |
|
Registered User
Join Date: Oct 2006
Location: Poughkeepsie, NY
Posts: 344
|
Re: Cog Set-up ( Video Clip )
D-a-m-n you Corey
 !!! There goes my savings account!!!! LOL Thanks.... those are impressive!!! I still need to get some bigger tires to appreciate the power I got. It's like driving on ice with my stock rims and tires!
__________________
2003 Mach 1 (Black) ATI PSC1 9# 3-Core Intercooler 62mm BBK TB K&N Airfilter FR 42# Injectors Focus Fuel Pump KB Boost-A-Pump Full SS Bassani Ex. Diablo MAFia Steeda TriAx Shifter Stewart Gauges AEM Air/Fuel Gauge Eibach Sportlines MM Panhardbar SLP Linelock AFS 17x10.5 Mach1 315/35/17 BFG Drag Radials Stock Internals Conservative Tune 438hp/405tq |
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
