O/R or Catted? - 2003-04 Mach 1 Registry Owners Club

CBrowning84 · 08-05-2006, 12:34 PM

I have the Magnaflow Catback, and I want it louder. Not a HUGE amount louder, but definately louder. I just don't want to be annoying.

I'm looking at getting a ProChamber. The catted version is 200+ more, and if the O/R isn't that much louder than the Catted, I would probably just get that.

dantheratman · 08-05-2006, 02:28 PM

dont know for sure what catted sounds like but mine isnt crazy loud uncatted.. unless you really stomp on it but definately has a really good "throaty" sound.

wchamberlain · 08-05-2006, 03:05 PM

It depends on what insanely loud is, I have the flow kit and it seems raspy, with BBK off road x-pipe. Honestly I just like the sound of off-roads versus catted personally. I don't think off-roads will give you that much more power, it's just what you prefer with the sound of your exhaust system

ruggersmach · 08-05-2006, 05:24 PM

Quote:

Originally Posted by CBrowning84

I have the Magnaflow Catback, and I want it louder. Not a HUGE amount louder, but definately louder. I just don't want to be annoying.

I'm looking at getting a ProChamber. The catted version is 200+ more, and if the O/R isn't that much louder than the Catted, I would probably just get that.

Go with this set up; see signature. It is probably what you are looking for.

CBrowning84 · 08-05-2006, 08:24 PM

I'm looking for a really deep sound, pretty smooth and not very raspy, which is why I went for the magnaflows. I hear the Prochamber helps as well with the deepness. I just don't know the sound level difference b/t catted and o/r

townson24 · 08-05-2006, 08:51 PM

Just an idle video clip. The first one is w/o cats and the second one is w/ cats. Will give you some idea of sound diff.
http://videos.streetfire.net/video/c...5c0a24478c.htm
http://videos.streetfire.net/video/5...b1934fa6bb.htm

To me there is a pretty big diff. in sound. w/o the cats it was too loud for me. Had some mini high flow's welded in.

03Mach150BP · 08-05-2006, 09:02 PM

Quote:

Originally Posted by ruggersmach

Go with this set up; see signature. It is probably what you are looking for.

CBrowning84 · 08-07-2006, 08:54 AM

I think i've decided to go with the O/R. I figure I can always add some mini-cats or something later!

townson24 · 08-07-2006, 09:25 AM

If in the future you decide to add mini cats, look for them on ebay. I found mine for $38 a piece. Local shops wanted between $150-250 per cat depending on the brand.

CBrowning84 · 08-07-2006, 02:17 PM

thanks for the heads up. Now I gotta go see if my exhaust guy will install the O/R!

matab14 · 08-10-2006, 02:33 AM

Quote:

Originally Posted by CBrowning84

thanks for the heads up. Now I gotta go see if my exhaust guy will install the O/R!

GAH Chase!.....Put that SH*T on yourself!.....It flippin easy....especially the xpipe part of it all!!!..........quit being pussy....The only way you will fully appreciate it........is if ya do it yourself!

matab14 · 08-10-2006, 02:34 AM

If not Tom (cool as ****) will do it, ask bailey!

S & S MUFFLER
DRAFFENVILLE, KY

stang03 · 08-10-2006, 03:30 PM

Bring it to the house....we will put it on!!

matab14 · 08-10-2006, 11:31 PM

[quote=stang03]Bring it to the house....we will put it on!![/QUOTE

EFF THAT ****!.......He's always disrespecting......I aint helping him put **** on!.......lol.......Just playin man, see ya Saturday!

CBrowning84 · 08-11-2006, 08:45 PM

lol you guys are crazy. We'll put it on ourselves then wooWOO

08-05-2006, 12:34 PM	#1
CBrowning84 wears sunglasses at night Join Date: Jun 2006 Location: KY Posts: 1,151	O/R or Catted? I have the Magnaflow Catback, and I want it louder. Not a HUGE amount louder, but definately louder. I just don't want to be annoying. I'm looking at getting a ProChamber. The catted version is 200+ more, and if the O/R isn't that much louder than the Catted, I would probably just get that. __________________ 2003 Sonic Blue Cobra Current Mods: - Hypercoated FR500's (18x9,18x10) - BFG KDW2 (265/35/18, 295/35/18) - Saleen Rear Wing - Densecharger Cold-air Intake - Bassani X-Pipe w/ high-flow cats, Magnaflow Catback w/ Flowmaster Mufflers - 2.93 Pulley - 470/534 rwhp/tq

08-05-2006, 02:28 PM	#2
dantheratman Registered User Join Date: Jan 2006 Location: here,here Posts: 593	Re: O/R or Catted? dont know for sure what catted sounds like but mine isnt crazy loud uncatted.. unless you really stomp on it but definately has a really good "throaty" sound.

08-05-2006, 03:05 PM	#3
wchamberlain Registered User Join Date: May 2006 Location: Ft Bragg, NC Posts: 929	Re: O/R or Catted? It depends on what insanely loud is, I have the flow kit and it seems raspy, with BBK off road x-pipe. Honestly I just like the sound of off-roads versus catted personally. I don't think off-roads will give you that much more power, it's just what you prefer with the sound of your exhaust system __________________ 04 Mach 1 OW 5 spd 07 Harley Davidson Street Glide FLHX Cobalt Blue 94 Bronco 351W 89 5.0 LX Hatch Auto, bone stock

08-05-2006, 08:24 PM	#5
CBrowning84 wears sunglasses at night Join Date: Jun 2006 Location: KY Posts: 1,151	Re: O/R or Catted? I'm looking for a really deep sound, pretty smooth and not very raspy, which is why I went for the magnaflows. I hear the Prochamber helps as well with the deepness. I just don't know the sound level difference b/t catted and o/r __________________ 2003 Sonic Blue Cobra Current Mods: - Hypercoated FR500's (18x9,18x10) - BFG KDW2 (265/35/18, 295/35/18) - Saleen Rear Wing - Densecharger Cold-air Intake - Bassani X-Pipe w/ high-flow cats, Magnaflow Catback w/ Flowmaster Mufflers - 2.93 Pulley - 470/534 rwhp/tq

08-05-2006, 08:51 PM	#6
townson24 Registered User Join Date: Jun 2004 Location: Houston, Tx. Posts: 553	Re: O/R or Catted? Just an idle video clip. The first one is w/o cats and the second one is w/ cats. Will give you some idea of sound diff. http://videos.streetfire.net/video/c...5c0a24478c.htm http://videos.streetfire.net/video/5...b1934fa6bb.htm To me there is a pretty big diff. in sound. w/o the cats it was too loud for me. Had some mini high flow's welded in. __________________ mods: jlt cai, php spacer, brisk spark plugs, bbk ceramic lt's, bbk catted short h pipe, SSS catback, carbon fiber driveshaft, upr upper and lower control arms, mgw shifter, chip/tune, HP custom cams, canton 9qt pan w/ windage tray, 3.90 gears, steeda pullies, rear seat delete, p&p manifold. 349 HP & 320 TQ car weight:3340 w/half tank of fuel

08-07-2006, 08:54 AM	#8
CBrowning84 wears sunglasses at night Join Date: Jun 2006 Location: KY Posts: 1,151	Re: O/R or Catted? I think i've decided to go with the O/R. I figure I can always add some mini-cats or something later! __________________ 2003 Sonic Blue Cobra Current Mods: - Hypercoated FR500's (18x9,18x10) - BFG KDW2 (265/35/18, 295/35/18) - Saleen Rear Wing - Densecharger Cold-air Intake - Bassani X-Pipe w/ high-flow cats, Magnaflow Catback w/ Flowmaster Mufflers - 2.93 Pulley - 470/534 rwhp/tq

08-07-2006, 09:25 AM	#9
townson24 Registered User Join Date: Jun 2004 Location: Houston, Tx. Posts: 553	Re: O/R or Catted? If in the future you decide to add mini cats, look for them on ebay. I found mine for $38 a piece. Local shops wanted between $150-250 per cat depending on the brand. __________________ mods: jlt cai, php spacer, brisk spark plugs, bbk ceramic lt's, bbk catted short h pipe, SSS catback, carbon fiber driveshaft, upr upper and lower control arms, mgw shifter, chip/tune, HP custom cams, canton 9qt pan w/ windage tray, 3.90 gears, steeda pullies, rear seat delete, p&p manifold. 349 HP & 320 TQ car weight:3340 w/half tank of fuel

08-07-2006, 02:17 PM	#10
CBrowning84 wears sunglasses at night Join Date: Jun 2006 Location: KY Posts: 1,151	Re: O/R or Catted? thanks for the heads up. Now I gotta go see if my exhaust guy will install the O/R! __________________ 2003 Sonic Blue Cobra Current Mods: - Hypercoated FR500's (18x9,18x10) - BFG KDW2 (265/35/18, 295/35/18) - Saleen Rear Wing - Densecharger Cold-air Intake - Bassani X-Pipe w/ high-flow cats, Magnaflow Catback w/ Flowmaster Mufflers - 2.93 Pulley - 470/534 rwhp/tq

08-10-2006, 02:34 AM	#12
matab14 is Designin Locomotives.. Join Date: Apr 2006 Location: Mt Vernon, IL Posts: 1,033	Re: O/R or Catted? If not Tom (cool as **) will do it, ask bailey! S & S MUFFLER DRAFFENVILLE, KY __________________ ~Matt 2007 Honda 600rr Blue / Silver sold. 2006 F150 SUPERCREW XLT 4X4 2.5" Lift 18x9 Moto Metal 951 Wheels 325/60/18 Nitto Grappelers SOLD** 2004 Comepition Orange 5 Speed w/ IUP DOB: JAN 23 2004 Gone But Not Forgotten

08-10-2006, 03:30 PM	#13
stang03 Azure Blue Fan Club Join Date: Jul 2003 Location: Murray, Kentucky Posts: 1,092	Re: O/R or Catted? Bring it to the house....we will put it on!! __________________ TOTALED 2004 Azure Blue Mach 5-speed w/ IUP -Procharger P1SC (8psi) - Lincoln Aviator Fuel Pump - Intercooler - Anderson Powerpipe - Lightning 90mm MAF - 42lb. Injectors - A/F, Fuel Pressure,Boost gauges - SLP Catted X - SLP "Loudmouth" Catback - Eibach Springs - Tokico Illuminas - Ford Racing Fr500 Wheels - Toyo Proxes 4 (245/40/18) - Pioneer AVH-P6800DVD 7" DDIN Screen 430RWHP / 400RWTQ

08-10-2006, 11:31 PM	#14
matab14 is Designin Locomotives.. Join Date: Apr 2006 Location: Mt Vernon, IL Posts: 1,033	Re: O/R or Catted? [quote=stang03]Bring it to the house....we will put it on!![/QUOTE EFF THAT **!.......He's always disrespecting......I aint helping him put on!.......lol.......Just playin man, see ya Saturday! __________________ ~Matt 2007 Honda 600rr Blue / Silver sold. 2006 F150 SUPERCREW XLT 4X4 2.5" Lift 18x9 Moto Metal 951 Wheels 325/60/18 Nitto Grappelers SOLD** 2004 Comepition Orange 5 Speed w/ IUP DOB: JAN 23 2004 Gone But Not Forgotten

08-11-2006, 08:45 PM	#15
CBrowning84 wears sunglasses at night Join Date: Jun 2006 Location: KY Posts: 1,151	Re: O/R or Catted? lol you guys are crazy. We'll put it on ourselves then wooWOO __________________ 2003 Sonic Blue Cobra Current Mods: - Hypercoated FR500's (18x9,18x10) - BFG KDW2 (265/35/18, 295/35/18) - Saleen Rear Wing - Densecharger Cold-air Intake - Bassani X-Pipe w/ high-flow cats, Magnaflow Catback w/ Flowmaster Mufflers - 2.93 Pulley - 470/534 rwhp/tq

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: