Louder Surge valve or BOV for Procharger? - 2003-04 Mach 1 Registry Owners Club

Machofmanhattan · 05-27-2006, 12:50 AM

Hey guys does anyone know of a more aggressive sounding bypass valve or compatible BOV for the procharger P-1sc kit? I'm leaving it as blow through and will only be pushing 8-10lbs but would like something with a little more kick than the procharger tweety bird bypass. Any suggestions/tips?

beerformeplz · 05-27-2006, 01:19 AM

Get the race valve, TRUST me it is plenty loud!

Machofmanhattan · 05-27-2006, 02:32 AM

will it still be very loud with only 8-10lbs of boost? I always thought the race valves were for higher boost levels. Thanks-

beerformeplz · 05-27-2006, 02:44 AM

Nope, im only running 11 #s. Cant have too big a bov.

IZZY · 05-27-2006, 03:33 AM

Val, I made 10 psi on the big end, with a previously owned Procharged mustang. I originally installed the smaller BOV that came with the kit, however, dissatisfied with it, I swapped it for the race version. Not only did it sound better but it also performed better. It sounded amazing whenever I got out of her. There was no mistaking the "woosh" of the race version.

BONESTOCK · 05-27-2006, 09:02 AM

Nice!

Got any links to the race version?

Mach 1 · 05-27-2006, 09:11 AM

You got me curious too. Sounds that good?

Linumup · 05-27-2006, 09:30 AM

Im running two Vortech Mini bov in different locations . You can listen for yourself to hear them . They have a very unique sound . You will be able to run one . I had to use two due to the amount of CFMs im pushing . I know Corey is running one large . I prefer the look of the minis myself . But that is your decision .

Here is a clip for you !

http://videos.streetfire.net/video/9...6C5724B087.htm

Mach 1 · 05-27-2006, 10:23 AM

Wow. That sounds nice! I might have to get me one of them.

beerformeplz · 05-27-2006, 01:11 PM

I really think the race ati is too loud and anoying for anything but a race application.If you want attention though thats the bov you need.

yellowmach9184 · 05-27-2006, 01:26 PM

where does the ati race bov mount is there any specific location

BONESTOCK · 05-27-2006, 01:38 PM

Sick, Linemup!! Sounds great!

blowngt · 05-27-2006, 01:40 PM

I've got the Procharger race BPV and you can't hear it at all, unless your comming down from 6-7k pull. Then you can hear it, but much less that the stock procharger piece.

Kinda hard to explain, but the stock piece was louder that the race by pass valve.

beerformeplz · 05-27-2006, 02:24 PM

Quote:

Originally Posted by blowngt

I've got the Procharger race BPV and you can't hear it at all, unless your comming down from 6-7k pull. Then you can hear it, but much less that the stock procharger piece.

Kinda hard to explain, but the stock piece was louder that the race by pass valve.

Is yours blow through or draw through?

beerformeplz · 05-27-2006, 02:25 PM

With the race valve on a blow through application you will hear the " whoosh " sound untill you get boost then it gets quiet. Mine sounds like a jet plane thats idiling.

blowngt · 05-27-2006, 02:54 PM

Quote:

Originally Posted by beerformeplz

Is yours blow through or draw through?

Draw thru.

cmylxgo · 05-27-2006, 03:06 PM

Quote:

Originally Posted by blowngt

Draw thru.

You will not get the noise you are looking for in a draw through design because you will have to recirculate your metered air. The blow off noise you are talking about is when the boost is vented to atmosphere.

-Corey

blowngt · 05-27-2006, 03:14 PM

Quote:

Originally Posted by cmylxgo

You will not get the noise you are looking for in a draw through design because you will have to recirculate your metered air. The blow off noise you are talking about is when the boost is vented to atmosphere.

-Corey

I know this, I'm not looking to change a thing. It's strange that the little stock POS by pass that procharger includes with the P & D series is MUCH louder than this race BPV. I'm not complaining, just trying to explain the difference.

VIPERBLUELX · 05-27-2006, 04:04 PM

The red race bypass is the only way to go, I love mine, money well spent.

BONESTOCK · 05-27-2006, 04:43 PM

Where's a good place to order up the red race bypass?

VIPERBLUELX · 05-27-2006, 06:18 PM

www.procharger.com

beerformeplz · 05-27-2006, 07:09 PM

Ill try to get a video of the sound tonight. I wouldnt recommend it for a daily driver though.

VIPERBLUELX · 05-27-2006, 07:14 PM

Quote:

Originally Posted by beerformeplz

Ill try to get a video of the sound tonight. I wouldnt recommend it for a daily driver though.

with the windows up and the A/C on I can't even hear mine

beerformeplz · 05-27-2006, 07:35 PM

Quote:

Originally Posted by VIPERBLUELX

with the windows up and the A/C on I can't even hear mine

Wish I could say that.

BONESTOCK · 05-27-2006, 07:43 PM

So because of the noise you'd not suggest it for a daily? Or is it a drivablity thing?

05-27-2006, 12:50 AM	#1
Machofmanhattan Rex R Join Date: Sep 2004 Location: Cortez, CO- Manhattan, KS Posts: 1,241	Louder Surge valve or BOV for Procharger? Hey guys does anyone know of a more aggressive sounding bypass valve or compatible BOV for the procharger P-1sc kit? I'm leaving it as blow through and will only be pushing 8-10lbs but would like something with a little more kick than the procharger tweety bird bypass. Any suggestions/tips? __________________ 2003 Torch Red Mach 1 PROCHARGED D1SC 9lbs w/ Sheetmetal intercooler 492rwhp / 434rwtq Forged Shortblock compliments of: www.houseofboost.com

05-27-2006, 01:19 AM	#2
beerformeplz Roll Tide ! Join Date: May 2004 Location: Richmond Posts: 2,491	Re: Louder Surge valve or BOV for Procharger? Get the race valve, TRUST me it is plenty loud! __________________ "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. " - Thomas Jefferson

05-27-2006, 02:32 AM	#3
Machofmanhattan Rex R Join Date: Sep 2004 Location: Cortez, CO- Manhattan, KS Posts: 1,241	Re: Louder Surge valve or BOV for Procharger? will it still be very loud with only 8-10lbs of boost? I always thought the race valves were for higher boost levels. Thanks- __________________ 2003 Torch Red Mach 1 PROCHARGED D1SC 9lbs w/ Sheetmetal intercooler 492rwhp / 434rwtq Forged Shortblock compliments of: www.houseofboost.com

05-27-2006, 02:44 AM	#4
beerformeplz Roll Tide ! Join Date: May 2004 Location: Richmond Posts: 2,491	Re: Louder Surge valve or BOV for Procharger? Nope, im only running 11 #s. Cant have too big a bov. __________________ "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. " - Thomas Jefferson

05-27-2006, 03:33 AM	#5
IZZY Lidia...merely a dream. Join Date: Feb 2004 Location: MIAMI, FL. Posts: 1,568	Re: Louder Surge valve or BOV for Procharger? Val, I made 10 psi on the big end, with a previously owned Procharged mustang. I originally installed the smaller BOV that came with the kit, however, dissatisfied with it, I swapped it for the race version. Not only did it sound better but it also performed better. It sounded amazing whenever I got out of her. There was no mistaking the "woosh" of the race version.

05-27-2006, 09:02 AM	#6
BONESTOCK Registered User Join Date: Jul 2004 Location: MA Posts: 1,685	Re: Louder Surge valve or BOV for Procharger? Nice! Got any links to the race version? __________________ 2004 Torch Red Mach 1 born on 03/26/04purchased on 07/14/04 465rwhp 409rwtq Let's go for a ride in my car! Procharged Dyno vid!

05-27-2006, 09:11 AM	#7
Mach 1 DSG guarded by a GSD Join Date: Apr 2006 Location: No. Easton, MA Posts: 1,681	Re: Louder Surge valve or BOV for Procharger? You got me curious too. Sounds that good? __________________ Procharged P-1SC Intercooled, 9 psi, 42 lb injectors, 80 mm Lightning MAF w/MAF.ia, 255 lph GT pump, NGK TR-6 plugs, Water/Methanol injection, SCT X cal 2 tuned by DEZ Racing, 10.5" AFS Rear wheels w/Nitto DR's, AutoMeter fuel/boost guages, MGW orange handle shifter, Sequential taillights, Visus louvers, Magnaflow catted x-pipe w/Magnapacks. 429 rwhp, 365 rwtq Dyno pic Engine bay pic

05-27-2006, 09:30 AM	#8
Linumup Registered User Join Date: Sep 2005 Location: Hydes Md. Posts: 6,483	Re: Louder Surge valve or BOV for Procharger? Im running two Vortech Mini bov in different locations . You can listen for yourself to hear them . They have a very unique sound . You will be able to run one . I had to use two due to the amount of CFMs im pushing . I know Corey is running one large . I prefer the look of the minis myself . But that is your decision . Here is a clip for you ! http://videos.streetfire.net/video/9...6C5724B087.htm __________________ 1045 RWHP 838 RWTQ Race Tune 23psi 878 RWHP 678 RWTQ Street Tune 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by SGS Automotive DYNO KING

05-27-2006, 10:23 AM	#9
Mach 1 DSG guarded by a GSD Join Date: Apr 2006 Location: No. Easton, MA Posts: 1,681	Re: Louder Surge valve or BOV for Procharger? Wow. That sounds nice! I might have to get me one of them. __________________ Procharged P-1SC Intercooled, 9 psi, 42 lb injectors, 80 mm Lightning MAF w/MAF.ia, 255 lph GT pump, NGK TR-6 plugs, Water/Methanol injection, SCT X cal 2 tuned by DEZ Racing, 10.5" AFS Rear wheels w/Nitto DR's, AutoMeter fuel/boost guages, MGW orange handle shifter, Sequential taillights, Visus louvers, Magnaflow catted x-pipe w/Magnapacks. 429 rwhp, 365 rwtq Dyno pic Engine bay pic

05-27-2006, 01:11 PM	#10
beerformeplz Roll Tide ! Join Date: May 2004 Location: Richmond Posts: 2,491	Re: Louder Surge valve or BOV for Procharger? I really think the race ati is too loud and anoying for anything but a race application.If you want attention though thats the bov you need. __________________ "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. " - Thomas Jefferson

05-27-2006, 01:26 PM	#11
yellowmach9184 Registered User Join Date: May 2006 Location: carteret,nj Posts: 75	Re: Louder Surge valve or BOV for Procharger? where does the ati race bov mount is there any specific location

05-27-2006, 01:38 PM	#12
BONESTOCK Registered User Join Date: Jul 2004 Location: MA Posts: 1,685	Re: Louder Surge valve or BOV for Procharger? Sick, Linemup!! Sounds great! __________________ 2004 Torch Red Mach 1 born on 03/26/04purchased on 07/14/04 465rwhp 409rwtq Let's go for a ride in my car! Procharged Dyno vid!

05-27-2006, 01:40 PM	#13
blowngt Registered User Join Date: May 2006 Location: South Florida Posts: 90	Re: Louder Surge valve or BOV for Procharger? I've got the Procharger race BPV and you can't hear it at all, unless your comming down from 6-7k pull. Then you can hear it, but much less that the stock procharger piece. Kinda hard to explain, but the stock piece was louder that the race by pass valve. __________________ 2000 Spring Edition 4v GT F1A installed waiting for a tune.....

05-27-2006, 02:25 PM	#15
beerformeplz Roll Tide ! Join Date: May 2004 Location: Richmond Posts: 2,491	Re: Louder Surge valve or BOV for Procharger? With the race valve on a blow through application you will hear the " whoosh " sound untill you get boost then it gets quiet. Mine sounds like a jet plane thats idiling. __________________ "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. " - Thomas Jefferson

05-27-2006, 04:04 PM	#19
VIPERBLUELX Registered User Join Date: Mar 2005 Posts: 553	Re: Louder Surge valve or BOV for Procharger? The red race bypass is the only way to go, I love mine, money well spent. __________________ 98 Cobra 468rwhp/450rwtq stock motor

05-27-2006, 04:43 PM	#20
BONESTOCK Registered User Join Date: Jul 2004 Location: MA Posts: 1,685	Re: Louder Surge valve or BOV for Procharger? Where's a good place to order up the red race bypass? __________________ 2004 Torch Red Mach 1 born on 03/26/04purchased on 07/14/04 465rwhp 409rwtq Let's go for a ride in my car! Procharged Dyno vid!

05-27-2006, 06:18 PM	#21
VIPERBLUELX Registered User Join Date: Mar 2005 Posts: 553	Re: Louder Surge valve or BOV for Procharger? www.procharger.com __________________ 98 Cobra 468rwhp/450rwtq stock motor

05-27-2006, 07:09 PM	#22
beerformeplz Roll Tide ! Join Date: May 2004 Location: Richmond Posts: 2,491	Re: Louder Surge valve or BOV for Procharger? Ill try to get a video of the sound tonight. I wouldnt recommend it for a daily driver though. __________________ "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. " - Thomas Jefferson

05-27-2006, 07:43 PM	#25
BONESTOCK Registered User Join Date: Jul 2004 Location: MA Posts: 1,685	Re: Louder Surge valve or BOV for Procharger? So because of the noise you'd not suggest it for a daily? Or is it a drivablity thing? __________________ 2004 Torch Red Mach 1 born on 03/26/04purchased on 07/14/04 465rwhp 409rwtq Let's go for a ride in my car! Procharged Dyno vid!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: