Insert Your Exhaust Sound Clips Here - Page 15 - 2003-04 Mach 1 Registry Owners Club

2003greyMach · 07-20-2009, 12:32 AM

http://www.youtube.com/watch?v=1NHXr5QZGys

stock headers
MRT H-Pipe
SSS Catback (adrenaline mufflers)

1/4 mile run (in car)

http://www.youtube.com/watch?v=Uj3cQEaDics

03stangmach1 · 07-22-2009, 01:57 AM

Does anyone have the regular borla catback (not the stingers) with a midpipe. If so, could I hear it?? Thanks!

Mudd92 · 09-02-2009, 08:21 PM

Anyone with an lt's o/r h and mac catback?>

Mudd92 · 09-03-2009, 02:46 PM

Well Ill try to get a clip I just ordered one last night.

04Mach1Blurr · 09-03-2009, 07:22 PM

Would like to hear any H pipe cats or no cats with the Borla Stinger catback. Stock manifolds. If im going to throw coilovers on, my bassani catted x is gonna be draging o feel. So any h pipe set up with stingers would be great to choose which one i want

MattN03 · 09-03-2009, 09:58 PM

Quote:

Originally Posted by 04Mach1Blurr

Would like to hear any H pipe cats or no cats with the Borla Stinger catback. Stock manifolds. If im going to throw coilovers on, my bassani catted x is gonna be draging o feel. So any h pipe set up with stingers would be great to choose which one i want

I have a stock manifolds, MRT O/R H-pipe, & Borla Stingers. This is a loud combo, but I like it overall. It has an annoying sound between 2000-3000 RPM (kinda like a glasspack I guess), but after that, it clears up and sounds mean. I get lots of compliments on it.

Here are couple of mine:

http://videos.streetfire.net/video/0...h-OR_86052.htm

http://videos.streetfire.net/video/0...h-MR_71324.htm

04Mach1Blurr · 09-04-2009, 12:12 AM

Quote:

Originally Posted by MattN03

I have a stock manifolds, MRT O/R H-pipe, & Borla Stingers. This is a loud combo, but I like it overall. It has an annoying sound between 2000-3000 RPM (kinda like a glasspack I guess), but after that, it clears up and sounds mean. I get lots of compliments on it.

Here are couple of mine:

http://videos.streetfire.net/video/0...h-OR_86052.htm

http://videos.streetfire.net/video/0...h-MR_71324.htm

Sounds good, a little raspy, but good. Im really not into the raspy sound.. so im trying to find a median between the exhaust with or without cats. Thanks!

Keep the other sound clips comin please!

MattN03 · 09-04-2009, 01:13 PM

Quote:

Originally Posted by 04Mach1Blurr

Sounds good, a little raspy, but good. Im really not into the raspy sound.. so im trying to find a median between the exhaust with or without cats. Thanks!

Keep the other sound clips comin please!

I agree on the rasp-I've just gotten used to it. I'd like to try an o/r x-pipe sometime and see if that would get rid of the rasp.

04Mach1Blurr · 09-04-2009, 02:58 PM

Quote:

Originally Posted by MattN03

I agree on the rasp-I've just gotten used to it. I'd like to try an o/r x-pipe sometime and see if that would get rid of the rasp.

I feel like any system without cats just gives a louder rasp. To some its a bonus in liking it, to me, ehh not so much, i need something that is strong yet doesnt sound like a tin can is stuck in my exhaust somewhere lol

MattN03 · 09-04-2009, 03:10 PM

Quote:

Originally Posted by 04Mach1Blurr

I feel like any system without cats just gives a louder rasp. To some its a bonus in liking it, to me, ehh not so much, i need something that is strong yet doesnt sound like a tin can is stuck in my exhaust somewhere lol

I've heard a catted H & Stingers in person before and it sounded just like mine except less rasp and overall dB level-very deep sounding still. Maybe try YouTube for a vid with this config if you don't get any hits here?

04Mach1Blurr · 09-04-2009, 03:26 PM

Quote:

Originally Posted by MattN03

I've heard a catted H & Stingers in person before and it sounded just like mine except less rasp and overall dB level-very deep sounding still. Maybe try YouTube for a vid with this config if you don't get any hits here?

Will do, thanks!

Mudd92 · 09-13-2009, 10:48 PM

I need to get a sound clip asap. WOW I am VERY happy with my mac catback, ALOT louder but goddang it sounds wicked! Turns alot more heads from a distance thats for sure. Sounds great with the bbk lts, bbk o/r h pipe and mac catback!

DarySmith · 09-18-2009, 06:36 PM

stock header
bassani x with metal cats
SLP LM1

http://s535.photobucket.com/albums/e...0915184850.flv

DarkMach1 · 09-25-2009, 05:44 PM

Heres mine, no headers, Mac prochamber and SSS adrenaline.

http://s643.photobucket.com/albums/u...soundclips.flv

EPIKMACH · 09-26-2009, 03:50 PM

Mac LT's, Mac o/r h, & Bassani catback....

1qkmch · 09-30-2009, 11:27 PM

Here is mine. BBK long tubes, BBK o/r H, and Bassani SS cat back. I'm thinking about switching to an x-pipe though.
http://www.youtube.com/watch?v=_tRXVvEUz4o

blumnday99 · 10-01-2009, 02:59 AM

Crower Stage 2 Cams, Bassani Mid-Length Headers, Bassani High Flow Catted X-Pipe, Magnaflow Catbacks

http://www.youtube.com/watch?v=o5CjYH_El3k

http://www.youtube.com/watch?v=asb5mUrDXu4

MattN03 · 10-01-2009, 01:03 PM

Quote:

Originally Posted by blumnday99

Crower Stage 2 Cams, Bassani Mid-Length Headers, Bassani High Flow Catted X-Pipe, Magnaflow Catbacks

http://www.youtube.com/watch?v=o5CjYH_El3k

http://www.youtube.com/watch?v=asb5mUrDXu4

How do you get away with running the cams, etc in CA with smog testing?

jstan · 10-02-2009, 01:49 AM

stock manifolds
bassani offroad X
flowmaster 40s
im not the brightest crayon in the box, and its really close which distorts it, so you may want to adjust speakers accordingly

http://s74.photobucket.com/albums/i2...t=DSCN3523.flv

st0ck Mach 1 · 10-05-2009, 10:37 AM

just a quick clip, the right pipe has been straightened will post more after tune

Kooks LTs
Kooks X 3x2.5
dynomax ultra flow ss

http://www.youtube.com/watch?v=lVbf8yRpA7o

MattN03 · 10-05-2009, 09:28 PM

Quote:

Originally Posted by st0ck Mach 1

just a quick clip, the right pipe has been straightened will post more after tune

Kooks LTs
Kooks X 3x2.5
dynomax ultra flow ss

http://www.youtube.com/watch?v=lVbf8yRpA7o

Sounds awesome!

st0ck Mach 1 · 10-06-2009, 04:54 PM

thx matt

jledesma · 10-26-2009, 04:00 PM

Just messing around with my GoPro camera and Moviemaker. Finally figured out how to post a **** video on here, deet deh dee!

http://www.youtube.com/watch?v=_mRVcrK6nWs
http://www.youtube.com/watch?v=xsoIa9S5SA4

Mustang9668 · 10-26-2009, 07:23 PM

Quote:

Originally Posted by jledesma

Just messing around with my GoPro camera and Moviemaker. Finally figured out how to post a **** video on here, deet deh dee!

http://www.youtube.com/watch?v=_mRVcrK6nWs
http://www.youtube.com/watch?v=xsoIa9S5SA4

Cool video's. I like that camera.

jledesma · 10-27-2009, 02:26 AM

Quote:

Originally Posted by Mustang9668

Cool video's. I like that camera.

Thanks, for the price, these little cameras are awesome. A HD version is out soon. Got mine off ebay new and saved $$$ over retail.

07-20-2009, 12:32 AM	#351
2003greyMach Registered User Join Date: Jun 2007 Location: Grapevine, Texas Posts: 76	Re: Insert Your Exhaust Sound Clips Here http://www.youtube.com/watch?v=1NHXr5QZGys stock headers MRT H-Pipe SSS Catback (adrenaline mufflers) 1/4 mile run (in car) http://www.youtube.com/watch?v=Uj3cQEaDics __________________ 2003 Darkshadow grey Mach1 K&N FIPK MRT catted H-Pipe SSS 304 Cat Back PHP Intake Spacer MGW short throw shifter frpp aluminum driveshaft frpp 4.10 gears Moser 31 spline axles :best quarter mile time: 60 1.932 330 5.539 1/8 8.486 mph 84.02 1000 11.038 1/4 13.184 mph 103.82 Last edited by 2003greyMach : 09-06-2009 at 10:59 PM.

07-22-2009, 01:57 AM	#352
03stangmach1 Registered User Join Date: Jul 2009 Location: Boston, Mass. Posts: 15	Re: Insert Your Exhaust Sound Clips Here Does anyone have the regular borla catback (not the stingers) with a midpipe. If so, could I hear it?? Thanks!

09-02-2009, 08:21 PM	#353
Mudd92 03 Mach Join Date: Jan 2009 Location: Savannah, GA Posts: 520	Re: Insert Your Exhaust Sound Clips Here Anyone with an lt's o/r h and mac catback?> __________________ -03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R H, Mac Catback, JLT RAI, 98 Cobra cams, 1/2" intake spacer 331/334 Eaton swap in progress -Joey

09-03-2009, 02:46 PM	#354
Mudd92 03 Mach Join Date: Jan 2009 Location: Savannah, GA Posts: 520	Re: Insert Your Exhaust Sound Clips Here Well Ill try to get a clip I just ordered one last night. __________________ -03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R H, Mac Catback, JLT RAI, 98 Cobra cams, 1/2" intake spacer 331/334 Eaton swap in progress -Joey

09-03-2009, 07:22 PM	#355
04Mach1Blurr Registered User Join Date: Jul 2008 Location: Arlington, VA Posts: 658	Re: Insert Your Exhaust Sound Clips Here Would like to hear any H pipe cats or no cats with the Borla Stinger catback. Stock manifolds. If im going to throw coilovers on, my bassani catted x is gonna be draging o feel. So any h pipe set up with stingers would be great to choose which one i want __________________ http://i917.photobucket.com/albums/a...lklkllcopy.png 2004 D.S.G. Mach 1 Mustang--Mods: J.L.T. R.A.I--1/2in. I.M.S.--Predator Handheld Tuner--MGW Short Throw Shifter--Bassani catted X pipe--Borla Stinger Catback--255/40zr/17 Nitto N555s--03/04 Cobra Front Clip--H.I.D.s Dual Beam Headlights, Single Beam Fogs--H.I.D.s 6000k color output--MSD 2-step Launch Control--Murdered out Tails

09-13-2009, 10:48 PM	#362
Mudd92 03 Mach Join Date: Jan 2009 Location: Savannah, GA Posts: 520	Re: Insert Your Exhaust Sound Clips Here I need to get a sound clip asap. WOW I am VERY happy with my mac catback, ALOT louder but goddang it sounds wicked! Turns alot more heads from a distance thats for sure. Sounds great with the bbk lts, bbk o/r h pipe and mac catback! __________________ -03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R H, Mac Catback, JLT RAI, 98 Cobra cams, 1/2" intake spacer 331/334 Eaton swap in progress -Joey

09-18-2009, 06:36 PM	#363
DarySmith Registered User Join Date: Sep 2005 Location: Colleyville, TX Posts: 89	Re: Insert Your Exhaust Sound Clips Here stock header bassani x with metal cats SLP LM1 http://s535.photobucket.com/albums/e...0915184850.flv __________________ 2003 Mach 1 Azure Blue 2.1 Kenne Bell IC - 8 rib Built bottom end, low compression pistons stage 3 cams 60 lbs injectors cobra cold air big oval throttle body BAP, Cobra tank, dual pumps custom tune, bas x-pipe, metal cats, slp exhaust steeda wing, vogtland springs, 245 Front, 315 Rear 580 HP 520 TQ

09-25-2009, 05:44 PM	#364
DarkMach1 Registered User Join Date: Aug 2008 Location: Miami,FL Posts: 254	Re: Insert Your Exhaust Sound Clips Here Heres mine, no headers, Mac prochamber and SSS adrenaline. http://s643.photobucket.com/albums/u...soundclips.flv __________________ 2004 black 5spd mach1 Mods-PHP intake spacer, Steeda tri-ax short shifter, SSS adrenaline catback, Mac prochamber, FRPP trac-lok, Moser 31 spline axles, FRPP 4.10 gears 292whp and 304wtq

09-26-2009, 03:50 PM	#365
EPIKMACH Registered User Join Date: Jul 2007 Location: Sacramento,California Posts: 616	Re: Insert Your Exhaust Sound Clips Here Mac LT's, Mac o/r h, & Bassani catback.... __________________ 03 Torch Red Mach 1=Born on 4/17/03 Full Maximum Motorsports susp. Bilstein's. MGW. Centerforce. Mac LT's & o/r H. Bassani CB. 18" DD FR500's Xcal2 tune=315rwhp & 327rwtq. 91 Oxford White LX Notch Sportlines. Bilstein's. MGW. Centerforce. Edelbrock Head's & intake. E cam. Mac LT's & O/R H. Magnaflow CB. 5 lug swap w/ Cobra brakes. 17" DD 10th anniversary Cobra's. =300rwhp & 320rwtq.

09-30-2009, 11:27 PM	#366
1qkmch Registered User Join Date: Sep 2009 Location: Oklahoma Posts: 118	Re: Insert Your Exhaust Sound Clips Here Here is mine. BBK long tubes, BBK o/r H, and Bassani SS cat back. I'm thinking about switching to an x-pipe though. http://www.youtube.com/watch?v=_tRXVvEUz4o

10-01-2009, 02:59 AM	#367
blumnday99 Registered User Join Date: Aug 2003 Location: Los Angeles, CA Posts: 273	Re: Insert Your Exhaust Sound Clips Here Crower Stage 2 Cams, Bassani Mid-Length Headers, Bassani High Flow Catted X-Pipe, Magnaflow Catbacks http://www.youtube.com/watch?v=o5CjYH_El3k http://www.youtube.com/watch?v=asb5mUrDXu4 __________________ Forged 4.6 // Crower Stage 2 Cams // Melling High Performance Oil Pump // Canton 7 Qt. Oil Pan Procharger D1SC w/ 3-Core Intercooler // Procharger Race Bypass Valve //Bassani Mid-Length Headers // Bassani Hi-Flow X-Pipe // Magnaflow Cat-Back 60 lb. Fuel Injectors // Cobra Tank w/ Duel Pumps + BAP MGW Short Throw Shifter // McLeod Twin-Disc Clutch KYB AGX Adjustable Struts // KYB Quad Shocks // Eibach Pro Kit // MAC Subframe Connectors // Hotchkis CC Plate Tuned and Built by RET

10-02-2009, 01:49 AM	#369
jstan Registered User Join Date: Mar 2009 Location: Cedar Park, Texas Posts: 49	Re: Insert Your Exhaust Sound Clips Here stock manifolds bassani offroad X flowmaster 40s im not the brightest crayon in the box, and its really close which distorts it, so you may want to adjust speakers accordingly http://s74.photobucket.com/albums/i2...t=DSCN3523.flv

10-05-2009, 10:37 AM	#370
st0ck Mach 1 not for long Join Date: Aug 2008 Location: lawrenceville GA Posts: 244	Re: Insert Your Exhaust Sound Clips Here just a quick clip, the right pipe has been straightened will post more after tune Kooks LTs Kooks X 3x2.5 dynomax ultra flow ss http://www.youtube.com/watch?v=lVbf8yRpA7o __________________ not for long

10-06-2009, 04:54 PM	#372
st0ck Mach 1 not for long Join Date: Aug 2008 Location: lawrenceville GA Posts: 244	Re: Insert Your Exhaust Sound Clips Here thx matt __________________ not for long

10-26-2009, 04:00 PM	#373
jledesma Book'em Danno! Join Date: Jun 2007 Location: Ewa Beach, HI Posts: 251	Re: Insert Your Exhaust Sound Clips Here Just messing around with my GoPro camera and Moviemaker. Finally figured out how to post a ** video on here, deet deh dee! http://www.youtube.com/watch?v=_mRVcrK6nWs http://www.youtube.com/watch?v=xsoIa9S5SA4 __________________ STOP & GO STUFF: Drilled/slotted rotors w/Hawk HPS pads, NGK iridium plugs, K&N filter, Roy's 3/8" spacer, 4.10's, SCT X3, Pypes o/r X, MAC SS 2 1/2" CB. LOOKS: Cobra folding mirrors, Smoked fogs & headlights with clear corners. Near future:** Accufab, intake, converter & trans mod, suspension mods, rims/tires. Last edited by jledesma : 10-26-2009 at 04:55 PM. Reason: corrections.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: