got the mach dynoed today - 2003-04 Mach 1 Registry Owners Club

TOWGUNNER · 06-08-2008, 10:25 PM

I was attending a car show and there was dyno there. I paid 75 bucks for 3 runs. This was the first time ever getting a mustang dynoed better yet a mach 1. It was not the dyno chasis. It was the one that they unbolt the wheels and attach it to there machines on each side. One of there portable ones that they take around alot. Not sure which one is better but just wanted to get it tuned. There was no Air fuel ratio so that sucked because I couldnt see what air fuel ratio I was at. Well I got 3 pulls and this was the outcome. Not to happy with it either so I hope it was off. 349 HP flywheel SAE corrected and 329 tourqe? so is that about 270 to the wheels and 329 tourqe to the wheels? I have posted the 2 sheets that I recieved from them. The only mods I have on the car are jegs off road h pipe, flowmaster 40 series, jlt cold air intake, FRPP aluminum drive shaft and thats it. The car is a 04 Mach 1 5 speed with 27k miles.

Bad_Mach · 06-09-2008, 01:54 AM

Your Mach sure sounded good on that dyno. Torque looks decent, but rwhp did seem low. Kind of hard to believe that its peak hp was at 5400 when we redline at 6800?

mach1of03 · 06-09-2008, 09:43 AM

It looked good and sounded good. It`s almost like they shut it down to early.

TOWGUNNER · 06-09-2008, 10:02 AM

yeah got me wondering if I should take it somewhere else. Thanks for the compliments.

beckerb · 06-09-2008, 10:18 AM

Lots of dyno shops (at least here in NC) will shut it down early unless you sign a paper stating that if it blows its your nickel so to speak.

KEVINC66 · 06-09-2008, 11:48 AM

If it was me,I would get it done by a professional tuner,that way he can make any adjustments while its on the dyno.Just reenforcing what was stated before

Bad_Mach · 06-09-2008, 02:09 PM

I would take it up to Watertown, SD and let Andy tune it. Its about 185 miles away. He does a great job. Give him a call. http://www.dynotuneusa.com/
This weekend I read there is going to be a "drive-on" chassis dyno in Onawa, but still won't be able to get it tuned.

06-08-2008, 10:25 PM	#1
TOWGUNNER Registered User Join Date: May 2007 Location: Va Posts: 276	got the mach dynoed today I was attending a car show and there was dyno there. I paid 75 bucks for 3 runs. This was the first time ever getting a mustang dynoed better yet a mach 1. It was not the dyno chasis. It was the one that they unbolt the wheels and attach it to there machines on each side. One of there portable ones that they take around alot. Not sure which one is better but just wanted to get it tuned. There was no Air fuel ratio so that sucked because I couldnt see what air fuel ratio I was at. Well I got 3 pulls and this was the outcome. Not to happy with it either so I hope it was off. 349 HP flywheel SAE corrected and 329 tourqe? so is that about 270 to the wheels and 329 tourqe to the wheels? I have posted the 2 sheets that I recieved from them. The only mods I have on the car are jegs off road h pipe, flowmaster 40 series, jlt cold air intake, FRPP aluminum drive shaft and thats it. The car is a 04 Mach 1 5 speed with 27k miles. Last edited by TOWGUNNER; 05-18-2009 at 02:57 AM.

06-09-2008, 01:54 AM	#2
Bad_Mach Registered User Join Date: Sep 2007 Location: Bronson, IA Posts: 33	Re: got the mach dynoed today Your Mach sure sounded good on that dyno. Torque looks decent, but rwhp did seem low. Kind of hard to believe that its peak hp was at 5400 when we redline at 6800? __________________ 2003 Mach 1, Azure Blue, 5 speed, IUP, JLT CAI, Diablosport Predator, X-pipe, Flowmasters, Pro 5.0 Shifter, 4.10's, Eibach Sportline Springs, 17x9/17x10.5 Chrome Mach Wheels 1987 Coupe, Silver & Black 2 tone, Cage, Minitubed. Procharged 438W on E85. 936rwhp, 8.87@153mph Nov. '08 Car Craft Feature!

06-09-2008, 09:43 AM	#3
mach1of03 #1052 of 9652 Join Date: Sep 2004 Location: sioux city iowa Posts: 994	Re: got the mach dynoed today It looked good and sounded good. It`s almost like they shut it down to early.

06-09-2008, 10:02 AM	#4
TOWGUNNER Registered User Join Date: May 2007 Location: Va Posts: 276	Re: got the mach dynoed today yeah got me wondering if I should take it somewhere else. Thanks for the compliments.

06-09-2008, 10:18 AM	#5
beckerb Registered User Join Date: Jun 2008 Location: Whitsett, North Carolina Posts: 338	Re: got the mach dynoed today Lots of dyno shops (at least here in NC) will shut it down early unless you sign a paper stating that if it blows its your nickel so to speak. __________________ Speed kills - buy a ricer and live forever !!! 2004 Ford MACH I Mustang, Pro-Charger 535 RWHP 2007 Dodge SRT-8 Superbee 2007 Hemi Quad Cab 4X4 2006 Harley V-Rod , 1999 S&S 1200 Sportster 2005 H/D FatBoy(Stage II),1973 BMW R75/5 restored 2004 Ducati Monster SR2,1972 BMW R75/5 restored 2002 Viper SRT-10 575 RWHP,2000 Custom 883 Sportster 1992 Stealth RT TT (Stage III) 633.9 AWHP 1992 Stealth RT, 1985 Mustang GT 30K miles 1991 Stealth RT TT 1985 Jeep CJ Rock Crawler

06-09-2008, 11:48 AM	#6
KEVINC66 Registered User Join Date: Oct 2006 Location: Corpus Christi, Texas Posts: 945	Re: got the mach dynoed today If it was me,I would get it done by a professional tuner,that way he can make any adjustments while its on the dyno.Just reenforcing what was stated before __________________ 2000 GT vert,03 Mach1 engine,auto, shaker hood,Mach1 brakes,C&L CAI,K&N,Tokico D Spec,UPR Coilover K frame with Steeda front sway bar,rear upper and lower control arms,4.30's,FRPP aluminum DS,17x9 deep dish chrome Mach1 rims with 275x40x17 Fuzion Z1's,Mac Catbac with 3 1/2 chrome tips,honeycomb rear panel,front Mach1 chin spoiler,Mach1 grill delete kit,polished aluminum gas cap.

06-09-2008, 02:09 PM	#7
Bad_Mach Registered User Join Date: Sep 2007 Location: Bronson, IA Posts: 33	Re: got the mach dynoed today I would take it up to Watertown, SD and let Andy tune it. Its about 185 miles away. He does a great job. Give him a call. http://www.dynotuneusa.com/ This weekend I read there is going to be a "drive-on" chassis dyno in Onawa, but still won't be able to get it tuned. __________________ 2003 Mach 1, Azure Blue, 5 speed, IUP, JLT CAI, Diablosport Predator, X-pipe, Flowmasters, Pro 5.0 Shifter, 4.10's, Eibach Sportline Springs, 17x9/17x10.5 Chrome Mach Wheels 1987 Coupe, Silver & Black 2 tone, Cage, Minitubed. Procharged 438W on E85. 936rwhp, 8.87@153mph Nov. '08 Car Craft Feature!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)