2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Tuning & Dyno Testing/Results

Tuning & Dyno Testing/Results Questions, experiences & results for electronic tuning and dyno tests

Reply
 
Thread Tools Display Modes
Old 10-06-2008, 09:04 PM   #26
one mach 1
Pro-gun Conservative!
 
one mach 1's Avatar
 
Join Date: Jul 2003
Location: Murrieta Calif.
Posts: 3,608
Re: Do gears affect Dyno Numbers?

Quote:
Originally Posted by jh 2004 mach View Post
my tuner told me to put my gears in before the tune because they would load the motor at diffrent rpms than the stock gears i dont know if thats true but now i wonder what my 318rwhp would be with out 430s and 10.5dds with315s
Just drive the car, and a few ponies won't be noticed except by you. What counts is how it performs on the track!(and the street)!
__________________
Gear head with 4.56's
one mach 1 is offline   Reply With Quote
Old 10-06-2008, 09:09 PM   #27
jh 2004 mach
Registered User
 
jh 2004 mach's Avatar
 
Join Date: Sep 2008
Location: trevor, Wisconsin
Posts: 431
Re: Do gears affect Dyno Numbers?

thats true dont matter to me she performs just fine
jh 2004 mach is offline   Reply With Quote
Old 06-27-2012, 11:57 PM   #28
Mach828
Dark Knight
 
Mach828's Avatar
 
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
Re: Do gears affect Dyno Numbers?

Just wanted to post my experience.

Here is a dyno of my car. The green line is with 4.10 gears, the red line is 4.56 gears plus I added long tube headers and an off road x vs the off road prochamber and stock manifolds I ran during the green line. Both runs were dyno'd on the same dyno, both SAE corrected, and both received dyno tunes by the same tuner (air fuel and timing were nearly identical).

Assuming the long tube headers gained me 12hp (which is common), I lost 4% due to the gear change. So my numbers should be more like 326hp/322tq.

Quote:
Originally Posted by My mods at time of this post
E70 Tuned, Borla CB, Flowtech LTs and OR X, RAI, 90mm LMAF, XCAL3, 96 Cobra Intake Cams, 4.56s, NGK TR55s, various suspension and non performance related mods
__________________

Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods.

Tuned by me with SCT Advantage

Last edited by Mach828; 03-19-2014 at 12:36 PM.
Mach828 is offline   Reply With Quote
Old 12-06-2012, 08:29 PM   #29
watman02
Registered User
 
watman02's Avatar
 
Join Date: Aug 2009
Location: Denver, Ia
Posts: 443
Re: Do gears affect Dyno Numbers?

When my budduy dynoed his car we did a pull in 3rd and in 4th with same tune and car made 20more hp in 4th. just thought i would tow that out there car was a 96 g with a stick and 3.73
__________________
mods:cai, flowmaster 40's, o/r x tune
best et: 13.17@107mph & 8.56@84.5 1/8
new mods: spacer, 98 cobra cams 4.10's
new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76
New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets
TUNED by ME!....with SCT proracer softwear!!
482hp / 481tq
new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4

00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune
times: 1.8 60' 12.8 @111

Last edited by watman02; 12-11-2012 at 12:59 PM.
watman02 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 07:21 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<