Wholesale Pricing to M1R members! - Page 12 - 2003-04 Mach 1 Registry Owners Club

rhite95 · 03-05-2010, 01:05 PM

Quote:

Originally Posted by birdman941

Genuine Ford OE Mach 1 headlights for 200 shipped per pair is BACK!

Steve,

How do I go about ordering a set from you?

birdman941 · 03-05-2010, 01:06 PM

Shoot me a PM

birdman941 · 03-06-2010, 02:12 PM

FRPP will have the 2011 Mustang GT engine this summer.
The controls pack will also be availble.
make a heck of a combo for a factory Five or Street Rod.
400 HP and 30 mpg.

Gameboy_J · 03-06-2010, 10:58 PM

I think I may need a Fuel Rail Pressure Sensor as I just threw a code for it. Can I get a quote on one shipped to 47117 please? It's for the Mach 1.

birdman941 · 03-06-2010, 11:17 PM

Pm sent

birdman941 · 03-08-2010, 08:40 AM

Just so members know,
Joe is off on most Mondays,
so initially it might be difficult to get definite "in stock" verification
on FRPP and OE items.
Once I get more acquainted with the GEF system, it will be a bit better.
I am getting all of the PM's and all parts are looked up.
Steve

Gameboy_J · 03-09-2010, 05:31 AM

Quote:

Originally Posted by birdman941

Just so members know,
Joe is off on most Mondays,
so initially it might be difficult to get definite "in stock" verification
on FRPP and OE items.
Once I get more acquainted with the GEF system, it will be a bit better.
I am getting all of the PM's and all parts are looked up.
Steve

I should be placing that order for the Fuel Rail Pressure Sensor this week.

st0ck Mach 1 · 03-09-2010, 05:46 AM

Steve! need a price for 4.56s

birdman941 · 03-09-2010, 11:13 AM

Quote:

Originally Posted by st0ck Mach 1

Steve! need a price for 4.56s

FRPP site not showing cost for some reason.
Will PM you when I get it.
Sorry for the delay.
Also need your zip.
Sales tax will apply if Ga. address.

Quote:

Originally Posted by Mach1Marauder

I bet he can't wait for your HUGE order!

Bill, it's about saving members dough, but you knew that.

Gameboy_J · 03-10-2010, 03:50 PM

Quote:

Originally Posted by Mach1Marauder

I bet he can't wait for your HUGE order!

Should I order two?

Smartass

birdman941 · 03-10-2010, 04:03 PM

No kidding...........................

grimyth · 03-12-2010, 12:00 PM

Hey B-man,

anychance I could get PC on 4.30's shipped to 31093? thanks

birdman941 · 03-12-2010, 12:11 PM

Quote:

Originally Posted by grimyth

Hey B-man,

anychance I could get PC on 4.30's shipped to 31093? thanks

Pm sent

birdman941 · 03-15-2010, 09:16 AM

Updates:
All below are shipped to lower 48 in USA (Ga. residents add sales tax)

New Ford OE Mach 1 headlights(fits 99-04) $200 Pr. shipped
Ignition:

8 NEW OE Ford ignition coils $215.00 plus shipping (can't beat that)

GEARS!
Your choice 3.55 or 3.73
$139.00 plus shipping

4.10 gears
$129 plus shipping

4.30 or 4.56 gears
$205.00 plus shipping

Add CF Traction lock clutch kit to above $103.00 plus shipping

Add Non IRS gear install kit including axle bearings and seals $95.20 plus shipping

birdman941 · 03-17-2010, 09:03 AM

Mach 1 and 96-04 Cobra brake parts!
Genuine Ford front AND rear brake pads for Mach 1/Cobra
$150 shipped to lower 48

Add front rotors w/brake hoses $229.00 plus shipping (heavy to ship)
and/or
Add rear rotors $159.00 plus shipping (heavy to ship)
Above brake parts in stock

Aluminum drive shaft for 5 speed Mach 1 (in stock)
M-4602-J
(also fits 96-04 Mustang GT w/5 speed and 96-98 Cobra)
$289.00 plus shipping

Mustang9668 · 03-17-2010, 10:30 AM

Quote:

Originally Posted by birdman941

Updates:
All below are shipped to lower 48 in USA (Ga. residents add sales tax)

Ignition:New Ford OE Mach 1 headlights(fits 99-04) $200 Pr. shipped

8 NEW ignition coils PLUS "Powered by SVT coil covers" $329 shipped
or
8 new ignition coils and polished Aluminum Ford Racing Coil covers $529.00 shipped

GEARS!
Your choice 3.55, 3.73, or 4.10
$189.00 shipped

4.30 or 4.56 gears
$249.00 shipped

Add CF Traction lock clutch kit to above $125 shipped

Add Non IRS gear install kit including axle bearings and seals $125

Dang gears are a good bit more than when I got a qoute from Joe a while back.

birdman941 · 03-17-2010, 01:36 PM

Used wrong table.
My bad

Mustang9668 · 03-17-2010, 06:59 PM

Quote:

Originally Posted by birdman941

Used wrong table.
My bad

That's more like it lol.

birdman941 · 03-17-2010, 07:08 PM

Virgin, whoops, thats me.

NUMACHI · 03-18-2010, 12:05 PM

Steve, just wanted to let you know that parts arrived yesterday and everything looks good.

Great guy to deal with. Thank you to you and Joe are in order for giving us fellow machers a great discount.

birdman941 · 03-18-2010, 12:08 PM

Thanks.
No problem, you guys are keeping me very busy!
Almost out of Mt. Dew!

birdman941 · 03-28-2010, 04:21 PM

Just a heads up folks!
For Supercharged Aluminator short blocks, there are 2 available.
One is for 96-01 Cobra and 03-04 Mach 1 front dress,
the other is for Terminators.
Machining is different.

birdman941 · 04-13-2010, 01:47 PM

Ford Racing recentky released a new 8 bolt aluminum flywheel.
It costs significantly LESS than the prior 2000 R flywheel.

NEW less expensive aluminum flywheel

M1R members cost of the new unit is about $330 plus shipping.

Also, Terminator clutches are again available,
as they were backordered for a time.

SparksMach1 · 04-14-2010, 11:30 AM

Man its awesome to have a fellow mach owner working at Ford. Gave me prices for my cobra clutch components that should have been illegal! Said he is shipping everything tooday too. Thanks again man!

-hope you get that vin taken care of quickly too, that thing is going to be a beast when you get it on the road.

birdman941 · 04-14-2010, 12:46 PM

No worries!

03-05-2010, 01:06 PM	#277
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! Shoot me a PM __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

03-06-2010, 02:12 PM	#278
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! FRPP will have the 2011 Mustang GT engine this summer. The controls pack will also be availble. make a heck of a combo for a factory Five or Street Rod. 400 HP and 30 mpg. __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

03-06-2010, 10:58 PM	#279
Gameboy_J Registered User Join Date: Apr 2007 Location: Louisville, KY Posts: 605	Re: Wholesale Pricing to M1R members! I think I may need a Fuel Rail Pressure Sensor as I just threw a code for it. Can I get a quote on one shipped to 47117 please? It's for the Mach 1. __________________ 2003 DSG Mach 1, 5-speed, IUP, 35k miles, 320rwhp/340rwtq 18" Anth. DD FR500's Nitto NT555 & NT555R DR's JLT Ram Air Intake 1/2" Intake Spacer Maximum Motorsports Rear LCA's Xcal3 w/ dyno tune FRPP 4.10 gears Moser Forged Axles FFRP Aluminum DS SLP line lock 8000k Bi-xenon HID's w/matching fogs MGW short throw Fidanza Billet alum. flywheel Eibach Pro-Kit Lowering Springs MM 4 bolt c/c plates BBK Ceramic Coated LT's BBK o/r H pipe Mac SS cat-back

03-06-2010, 11:17 PM	#280
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! Pm sent __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

03-08-2010, 08:40 AM	#281
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! Just so members know, Joe is off on most Mondays, so initially it might be difficult to get definite "in stock" verification on FRPP and OE items. Once I get more acquainted with the GEF system, it will be a bit better. I am getting all of the PM's and all parts are looked up. Steve __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

03-09-2010, 05:46 AM	#283
st0ck Mach 1 not for long Join Date: Aug 2008 Location: santa rosa beach fl Posts: 830	Re: Wholesale Pricing to M1R members! Steve! need a price for 4.56s __________________ BB/S 324 kooks sully accufab cams heads valves bs3 ls1coils sully rails aeromotive regulator Weldon pump 8gal cell batt in trunk tko500(faceplated) spool upr k foxbody spindles metco upper an lowers 502rwhp.

03-10-2010, 04:03 PM	#286
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! No kidding........................... __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

03-12-2010, 12:00 PM	#287
grimyth Registered User Join Date: Oct 2009 Location: Georgia Posts: 76	Re: Wholesale Pricing to M1R members! Hey B-man, anychance I could get PC on 4.30's shipped to 31093? thanks

03-15-2010, 09:16 AM	#289
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! Updates: All below are shipped to lower 48 in USA (Ga. residents add sales tax) New Ford OE Mach 1 headlights(fits 99-04) $200 Pr. shipped Ignition: 8 NEW OE Ford ignition coils $215.00 plus shipping (can't beat that) GEARS! Your choice 3.55 or 3.73 $139.00 plus shipping 4.10 gears $129 plus shipping 4.30 or 4.56 gears $205.00 plus shipping Add CF Traction lock clutch kit to above $103.00 plus shipping Add Non IRS gear install kit including axle bearings and seals $95.20 plus shipping __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno Last edited by birdman941; 04-14-2010 at 04:38 PM.

03-17-2010, 09:03 AM	#290
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! Mach 1 and 96-04 Cobra brake parts! Genuine Ford front AND rear brake pads for Mach 1/Cobra $150 shipped to lower 48 Add front rotors w/brake hoses $229.00 plus shipping (heavy to ship) and/or Add rear rotors $159.00 plus shipping (heavy to ship) Above brake parts in stock Aluminum drive shaft for 5 speed Mach 1 (in stock) M-4602-J (also fits 96-04 Mustang GT w/5 speed and 96-98 Cobra) $289.00 plus shipping __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

03-17-2010, 01:36 PM	#292
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! Used wrong table. My bad __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

03-17-2010, 07:08 PM	#294
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! Virgin, whoops, thats me. __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

03-18-2010, 12:05 PM	#295
NUMACHI R CODE Join Date: Mar 2004 Location: Hagerstown, Maryland Posts: 1,087	Re: Wholesale Pricing to M1R members! Steve, just wanted to let you know that parts arrived yesterday and everything looks good. Great guy to deal with. Thank you to you and Joe are in order for giving us fellow machers a great discount. __________________ 2003 Azure Blue Mach 5 Speed, IUP - - - - - - - - - - - - - - - - - - - - ALMOST STOCK

03-18-2010, 12:08 PM	#296
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! Thanks. No problem, you guys are keeping me very busy! Almost out of Mt. Dew! __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

03-28-2010, 04:21 PM	#297
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! Just a heads up folks! For Supercharged Aluminator short blocks, there are 2 available. One is for 96-01 Cobra and 03-04 Mach 1 front dress, the other is for Terminators. Machining is different. __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

04-13-2010, 01:47 PM	#298
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	New 8 bolt Aluminum flywheel Ford Racing recentky released a new 8 bolt aluminum flywheel. *It costs significantly LESS* than the prior 2000 R flywheel. *NEW less expensive* aluminum flywheel M1R members cost of the new unit is about $330 plus shipping. Also, Terminator clutches are again available, as they were backordered for a time. __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG** "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno Last edited by birdman941; 04-14-2010 at 04:41 PM.

04-14-2010, 11:30 AM	#299
SparksMach1 Shitin 'n Gitin Join Date: Mar 2007 Location: Pasadena, MD Posts: 1,416	Re: Wholesale Pricing to M1R members! Man its awesome to have a fellow mach owner working at Ford. Gave me prices for my cobra clutch components that should have been illegal! Said he is shipping everything tooday too. Thanks again man! -hope you get that vin taken care of quickly too, that thing is going to be a beast when you get it on the road. __________________ 2003 AB Mach -- 442/435 @ the rear ALL MOTOR -Race Gas FRPP BOSS 5.0 block, 10.6:1 compression, Manley H-Beams; Diamond flat-top pistons, P&P heads W/ 5-angle valve job & ARP Head studs, PP upper/lower intake, Comp Stage 2 N/A cams, FR500 springs, valves, and followers, Tube K with coilovers and Bilsteins, Kooks, Stingers, 2.97 T-56 Magnum, 31 Spline Superior axles & Auburn-pro dif, built battle boxes, KB BAP w/ 39lb injectors, and 4:10's.

04-14-2010, 12:46 PM	#300
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Wholesale Pricing to M1R members! No worries! __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)