|
|
Photo Gallery | $ Donations $ | Register | FAQ | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
06-13-2005, 08:57 PM | #11 |
Torque wins!
Join Date: Dec 2004
Location: Florida
Posts: 13,167
|
Re: BBK Dual 65mm Throttle body review
Update:
It was cool and damp the past few days here in Florida with the tropical storm and all. When driving, I noticed that the idle would hang a bit around 1200 PM and eventually fall to 800 RPM or so when the engine was at operating temperature. I sat and figured out what it was ( I THINK) I HAD made the IAC restrictor with 2 small (9/32" or so) holes and it occurred to me that not enough air was going through it to "feed" the IAC motor. I went and made another IAC plate this afternoon, this time with the one "normal" size hole, and the other hole 1/8". I started it up and the idle returned IMMEDIATELY, but went down to 500 RPM before recovering with the A/C on, and wanted to stall. I opened up the plate to 3/16" and it seems fine now. I'll see in the morning how it is. I think I am at 99% now. Hopefullyanyway.
__________________
The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|