2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > Buying & Selling > 2003-04 Mach 1 - For Sale/Wanted

2003-04 Mach 1 - For Sale/Wanted Post ONLY 03-04 Mach 1s For sale or wanted. Please Put Year, Color & Location in title!

Reply
 
Thread Tools Display Modes
Old 06-24-2019, 11:13 PM   #1
sutyak
it's soo-tack
 
sutyak's Avatar
 
Join Date: Nov 2002
Location: Fairmont, WV
Posts: 2,082
For Sale: Turbo 2004 Mach 1

Love the car but I'm starting a business and would rather have the funds at the moment.
I just swapped the G-Force transmission back into the car and it's running great aside from an exhaust leak I may or may not have time to track down before I sell.

Rear end has 31-spline Mosers, Ford trac lock, and Precision 4.10 gears. 3.55 and 3.90 gears also included. For repeated track abuse it should have c-clip eliminators installed. I never got around to that.
6-point roll bar painted to match the dark shadow grey paint. Padding added for track compliance.
Full-length subframe connectors.
Corbeau seats. Factory seatbelts.
Also have factory seats, but the driver's side is worn and would need recovered.
Motor is forged 8.5:1 CR. Manley rods and CP pistons.
Turbo kit is a modified Hellion with a carefully matched Borg Warner S369 SX-E, good for 1,000hp.
Car should be right about 700whp at 18psi, but have not had it dyno'd since I changed turbos. A 3psi spring is included if 18psi doesn't feel ridiculous enough.
Boost controller is set for 9psi and 18psi. I only run 9psi on the street because 18psi is just absurd and it just blows the tires off after the boost ramps up.
Suspension is coilovers and spherical bushing control arms except for 2 poly lower control arm ends. Bolt sizes have been upgraded. Torque boxes are reinforced.
The odometer shows 91K miles, but barely anything in the car is original.
The car appears to have been repainted or re-cleared, but the previous owner couldn't/wouldn't provide any details there other than it has never been wrecked.
Tuned by Rev Auto in Maryland, and I have the tune file if you have the SCT Pro Racer Package and the license. I've only made minor tweaks for driveability and gear ratios/tires.
The transmission is a highly modified TR-3650 using G-Force gears and a steel bellhousing. Including the twin disc RXT clutch there is over $5,000 invested in this transmission, but the clutch feel and shifting feels near stock. There is some gear noise as to be expected with a more aggressive gear set.
I've put a tremendous amount of time and love into this car and I hate to see it never get driven. Any questions just ask. There's a significant amount of things I've forgotten to list and I may organize this better later.

This is not a thrown-together cheap build. I build my cars with the best parts and am very meticulous. (build thread is here)

The car was to be a 10.0 car built to NHRA standards for competition, but streetable enough to drive to the track and home. While the spherical bushings are a bit much and there are currently no front or rear sway bars, the ride is reasonable on the street.
I did not get a chance to take it to the track.

Asking price includes (uninstalled):

Car
Billet Specialties drag wheels
'99 Cobra intake cams
MSD 2-step
Stronger valve springs
Stock seats (driver side needs recovered and new foam)
Spare transmission (built with stronger shift forks and 26 spline input shaft)
Various trans parts (syncros, gears, etc)
Car cover
4x ugly stock wheels painted flat black by previous owner
Stock drive shaft
Aluminum drive shaft
160# front sprints
Strange adjustable shocks
Poly engine and trans mounts
3.55 gears
3.90 gears
Other stuff I forgot

Asking $20K for vehicle, stuff listed above, and just about any other Mustang part in my garage you want.
Clear WV title
Located ~2hrs south of Pittsburgh
Attached Thumbnails
Mach1.jpg   Mach1_Interior.jpg   Mach1Engine.jpg  
__________________
mark
2004 DSG Mach 1. Built motor. Turbo. 667whp
2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold)
2003 DSG Mach 1. 12.65 @ 106 (sold)

Last edited by sutyak; 07-02-2019 at 07:37 PM.
sutyak is offline   Reply With Quote
Old 06-29-2019, 06:55 AM   #2
Carson45
Registered User
 
Carson45's Avatar
 
Join Date: Apr 2006
Location: Nashville TN
Posts: 77
Re: For Sale: Turbo 2004 Mach 1

Shoot me a text 615-920-2409
Carson45 is offline   Reply With Quote
Old 07-01-2019, 12:09 PM   #3
sutyak
it's soo-tack
 
sutyak's Avatar
 
Join Date: Nov 2002
Location: Fairmont, WV
Posts: 2,082
Re: For Sale: Turbo 2004 Mach 1

Here is the mod breakdown. Any questions just ask.

Transmission/clutch:
TR3650 with G-Force gear set, billet shift forks, bronze pads, 26-spline input shaft, and QuickTime bell housing
Mark Williams slip yolk, Cobra aluminum driveshaft, custom spacer, and safety loop.
Lowered clutch pedal with custom quick ramp quadrant. Billet firewall adjuster. Adjustable clutch cable.
McLeod RXT twin disc clutch and Fidanza aluminum flywheel
MGW shifter

Rear end:
8.8
31 spline Moser axles. All new bearings and seals.
31 spline Ford trac lock diff
4.10 Precision gears
Welded axle tubes
Moser diff cover painted sonic blue and cleared
Housing painted satin black

Motor:
Teskid aluminum block
8.5:1 forged CP pistons
Manley rods
ARP head studs, rod bolts, cam bolts
170 degree thermostat
Moroso aluminum expansion tank

Suspension:
UPR Tubular k member up front with fully adjustable 200# coil overs
Caster camber plates
Fully adjustable 100# coil overs on the rear
Plate-reinforced control arm boxes and welded
Spherical bushings (2 bushings are poly)
Larger lower control arm bolts (can't go back to stock unless the bolts were sleeved)
Full length subframe connectors

Fuel system:
80lb injectors
Lethal performance return style fuel system with dual walboro pumps with adjustable regulator.

Exterior:
03/04 Cobra front bumper
35% tint
17x10 03/04 Cobra style wheels chrome with 315 Nitto 555R drag radial
17x9 front with sumitomo 275 tires

Interior:
Corbeau GTS II Reclining Seat - Black Leather w/ Suede and lumbar
Cobra genuine leather steering wheel, shift knob (5spd), shfit boot, and ebrake boot
Alpine radio. Only front speakers are installed. No rear speaker deck or amps.
Carbon fiber switch plate with fuel pump kill switch. Additional switches available not hooked up.
Maximum Motorsports 6-point roll bar, painted DSG. Padded within NHRA specs. Good for 10.0 or slower. Swing-out and removable door bars.

Turbo setup:
Modified Hellion with a compressor map matched Borg Warner S369 SX-E
9psi for street, 18psi for strip. I do not recommend 18psi on the street with 4.10 gears. The rear will become an ice skate.
50mm JGS BOV (the best)
46mm Precision wastegate
3" downpipe split to 2.5" Magnaflow exhaust
__________________
mark
2004 DSG Mach 1. Built motor. Turbo. 667whp
2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold)
2003 DSG Mach 1. 12.65 @ 106 (sold)
sutyak is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:00 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<