|
|
Photo Gallery | $ Donations $ | Register | FAQ | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
Technical Q&A. HOW TO's, TSB's & Warranty Items Have a Problem? Technical Questions & Answers. HOW TO's & TSB's, Warranty Issues |
|
Thread Tools | Display Modes |
03-28-2011, 08:32 PM | #1 |
Registered User
Join Date: Mar 2008
Location: Cobb Island, MD
Posts: 587
|
Idle rpm????
I've noticed for a while that she was idling low, 500-600. Well, while adjusting my WOT fuel at the track I noticed an asterisk by the "idle rpm" setting in my diablo tuner, indicating that it's been changed. I have no clue how this could've happened. Sure enough, it was set at 554, down from stock 704. The tuner rpm settings go in increments of 50 so it was 3 notches off. I set it back to stock but was thinking that lower idle rpm would be a little less gas and wear over the long term. So is it okay to lower it back?? Thx in advance for any input.
__________________
Full SLP, JLT, Diablo, 4.10s, DRs 1/8.......7.74 @ 90 1/4......12.09 @ 113.5 |
03-29-2011, 09:42 AM | #2 |
8LB YNER
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
|
Re: Idle rpm????
I had dropped my idle a long time ago, but occasionally I would experience a stall so I raised it back up. Other then that and possibly low vacuum affecting the power brakes you should be fine.
__________________
Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12... |
03-29-2011, 02:45 PM | #3 |
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: Idle rpm????
Mine used to idle at 700 when it had the factory tune. After the diablow canned tune it went up to 800.
Not the answer to your question, but just thought I'd share.
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
03-29-2011, 03:02 PM | #4 |
Loud, fast and fun
Join Date: Apr 2004
Location: Owning Ricers at MIR
Posts: 7,864
|
Re: Idle rpm????
Put it back to stock. Lower idles risk it stalling out more often... especially when coming to a stop. You could have your car stall out when in the shut down part of the track. Don't really want to lose power steering and brakes when doing 100+ LOL
|
03-30-2011, 08:35 PM | #5 |
Registered User
Join Date: Mar 2008
Location: Cobb Island, MD
Posts: 587
|
Re: Idle rpm????
It's been low for a while and havent' stalled once because I'm always in gear unless stop or close to there. I coast in 5th, instead of putting it in neutral, in the shutdown area after stalling once a long time ago. The std. setting in my Diablo is 704, I just keep it there.
__________________
Full SLP, JLT, Diablo, 4.10s, DRs 1/8.......7.74 @ 90 1/4......12.09 @ 113.5 |
03-31-2011, 12:07 AM | #6 |
1 of 124
Join Date: May 2009
Location: PG, Murrland
Posts: 198
|
Re: Idle rpm????
i dont have any tunes or anything in my mach and out of nowhere the idle dropped to about 500-550 or so over the last couple months. used to be in the 700 range like it should be. it's still running strong, so no idea what happened there
__________________
2004 Competition Orange Mach 1 143883 IMSHAKN |
03-31-2011, 05:41 AM | #7 | |
Registered User
Join Date: Oct 2003
Location: Dearborn Heights Michigan
Posts: 794
|
Re: Idle rpm????
Quote:
__________________
Accufab 60 mm twin Throttle body (Thanks Wutang) Predator Custom Tune +.5 lean,+.5 lean 2k up 4k up LC1 w/Ometer display 12.9- 12.7 AFR 2k-7k Mach 1 Floormats Roy Spacer IAC plate MGW Mach 1 License plate frame NGK TR55IX Iridium Bassini o/r X (Thanks cmylxgo) SteedaTri-ax 2.5" Stainless Pypes flowtubes 2.5x2.25 delta 40's Stainless 3 disk Car Chemistry inserts Factory tails quiet at idle and LOUD on the gas |
|
03-31-2011, 10:46 AM | #8 |
Its stock....No really!
Join Date: Jul 2005
Location: Albuquerque, NM
Posts: 4,433
|
Re: Idle rpm????
Mine is set to 800, but its not stock......obviously
__________________
2003 Azure Blue Mach 1 5spd w/ IUP Mods: Lots of new stuff coming.....stay tuned |
04-01-2011, 01:42 PM | #9 |
CAT MASTA!
Join Date: Jun 2007
Location: Vero Beach, Florida
Posts: 3,406
|
Re: Idle rpm????
mine is also set to 800 via custom tune. stock longblock.
now that i think about it a slightly lower idle (700-750) would be a nice change.
__________________
04' Torched 6-speed Build Date: 02/25/2004 Ported Eaton @7psi Viper T-56 Built 8.8,4.10's 441/402 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|