2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > Buying & Selling > Mustangs Parts For Sale/Wanted

Mustangs Parts For Sale/Wanted Looking for a Mustang or Part or have one for sale? Post it here!

Reply
 
Thread Tools Display Modes
Old 07-31-2006, 08:09 PM   #1
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
ABS Pump Delete Brake Manifold

If interested in removing the ABS pump for 94-2010 Mustang GT/Cobra/Mach 1/V-6, let me know and I will machine the delete manifold to replace the ABS pump without having to re-plumb and flare lines. The factory ABS pump can be re-installed down the road if desired. THIS IS FOR OFF ROAD USE ONLY. http://www.prbmachining-absdeletemanifolds.com/

These manifolds are machined out of T-6061 aluminum and weigh (98-04) 0.32lbs. (94-97) 0.5lbs. The 98-04 ABS pump & bracket weighs 9.7lbs. The 94-97 ABS pump & bracket weighs 13.5 lbs.

Links below shows pictures of 94-97 ABS Delete Manifolds Cobra/GT:

http://i101.photobucket.com/albums/m.../absblock1.jpg
http://www.mach1registry.org/forums/...3&postcount=73


Link below shows a 98 ABS Delete for GT/Cobra (which is unique) with a line lock mounted to the side.

http://forums.corral.net/forums/show...34&postcount=8


Links below shows pictures of 99-04 ABS Delete Manifold for GT/Cobra/Mach 1/2001 Bullitt GT:

http://www.moddedmustangs.com/forums...ml#post3434080
http://i297.photobucket.com/albums/m...R/DSCF0037.jpg
http://www.mach1registry.org/forums/...6&postcount=17
http://i160.photobucket.com/albums/t...t/100_3275.jpg
Attached Images
File Type: jpg 223.jpg (51.7 KB, 116 views)
File Type: jpg 003.jpg (46.6 KB, 214 views)
File Type: jpg 004.JPG (134.2 KB, 144 views)
File Type: jpg 213.JPG (122.9 KB, 115 views)
File Type: jpg 006.JPG (121.5 KB, 147 views)
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/

Last edited by Phil; 06-08-2018 at 02:33 PM.
Phil is offline   Reply With Quote
Old 08-01-2006, 01:33 AM   #2
wchamberlain
Registered User
 
wchamberlain's Avatar
 
Join Date: May 2006
Location: Alvin, TX
Posts: 932
Re: ABS Pump Delete Brake Manifold

Does this convert it to manual brakes?????
__________________
13 Mustang GT 5.0
Deep Impact Blue 6 spd

04 Mach 1
OW 5 spd

89 5.0 LX Hatch
Auto, bone stock
wchamberlain is offline   Reply With Quote
Old 08-01-2006, 04:40 AM   #3
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by wchamberlain
Does this convert it to manual brakes?????
No...
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 08-01-2006, 08:44 AM   #4
wchamberlain
Registered User
 
wchamberlain's Avatar
 
Join Date: May 2006
Location: Alvin, TX
Posts: 932
Re: ABS Pump Delete Brake Manifold

So what does it do then?
__________________
13 Mustang GT 5.0
Deep Impact Blue 6 spd

04 Mach 1
OW 5 spd

89 5.0 LX Hatch
Auto, bone stock
wchamberlain is offline   Reply With Quote
Old 08-01-2006, 09:15 AM   #5
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by wchamberlain
So what does it do then?
http://www.mach1registry.org/forums/...oving+abs+pump
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 08-02-2006, 04:28 PM   #6
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by wchamberlain
So what does it do then?
It replaces the Bosch ABS pump which weighs 9.7 lbs. The brake lines reconnect to the manifold so you don't have to replumb the brake lines. The line will fit to the manifold just like reconnecting to the ABS pump. It's mainly for owners that are serious about weight reduction for drag racing/road racing..

http://www.mach1registry.org/forums/...6&postcount=17

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/

Last edited by Phil; 08-02-2006 at 05:18 PM.
Phil is offline   Reply With Quote
Old 08-02-2006, 07:39 PM   #7
dj33
Registered User
 
Join Date: Mar 2004
Location: Acton, Ma
Posts: 190
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by Phil
It replaces the Bosch ABS pump which weighs 9.7 lbs. The brake lines reconnect to the manifold so you don't have to replumb the brake lines. The line will fit to the manifold just like reconnecting to the ABS pump. It's mainly for owners that are serious about weight reduction for drag racing/road racing..

http://www.mach1registry.org/forums/...6&postcount=17

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT
Phil,
Quick question, where does the manifold bolt up to?
Thanks
__________________
2004 Mach 1
Azure Blue
Automatic
12.06 1/4
7.640 1/8
1.645 60 ft
112.34 mph
New England Dragway Modified # 713

Special Thanks to Mike Dez Racing and
Tube Chassis Designz
dj33 is offline   Reply With Quote
Old 08-01-2006, 09:52 AM   #8
Angus66
1/4 Mile Drags Moderator
 
Angus66's Avatar
 
Join Date: Aug 2003
Location: Guntersville, AL
Posts: 2,630
Thumbs up Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by Phil
If interested in removing the ABS pump let me know and I will make the brake manifold to replace the pump without having to replace/replumb your brake lines..

These are made of T-6061 aluminum and weigh 0.2lbs. The ABS pump weighs 9.7lbs. $70 shipped..

http://www.mach1registry.org/forums/...1&postcount=16
Nifty looking part Phil - thanks for offering these for sale to other racers. :THUMBSUP:

I'll probably be getting one of these from you in the near future.

I need to get my new axles/c-clip eliminators/etc install going 1st though...
Angus66 is offline   Reply With Quote
Old 08-01-2006, 03:15 PM   #9
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by Angus66
Nifty looking part Phil - thanks for offering these for sale to other racers. :THUMBSUP:

I'll probably be getting one of these from you in the near future.

I need to get my new axles/c-clip eliminators/etc install going 1st though...
Thanks Bill.. I'll keep one on the side for you.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 08-07-2006, 07:51 PM   #10
DTMach1
semi-pro moderator
 
DTMach1's Avatar
 
Join Date: May 2004
Location: Virginia Beach
Posts: 4,955
Re: ABS Pump Delete Brake Manifold

Quick question, is there a way to shut off the ABS light? Or do ya just deal with it?
__________________

2004 Mach 1
IUP/5spd/DSG
Engine, etc done...sits in the garage
DTMach1 is offline   Reply With Quote
Old 08-07-2006, 07:57 PM   #11
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by DTMach1
Quick question, is there a way to shut off the ABS light? Or do ya just deal with it?
As of now, my ABS light stays on.. I have to talk to J. Chambers to see if it can be turned off by a tuner!!??..
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 08-07-2006, 09:46 PM   #12
DTMach1
semi-pro moderator
 
DTMach1's Avatar
 
Join Date: May 2004
Location: Virginia Beach
Posts: 4,955
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by Phil
As of now, my ABS light stays on.. I have to talk to J. Chambers to see if it can be turned off by a tuner!!??..
Cool, I was wondering if it could be removed with a tune, or maybe pulling a reference line out of the 'puter.
__________________

2004 Mach 1
IUP/5spd/DSG
Engine, etc done...sits in the garage
DTMach1 is offline   Reply With Quote
Old 08-08-2006, 08:48 PM   #13
manny
Registered User
 
manny's Avatar
 
Join Date: Aug 2004
Location: kansas city, ks.
Posts: 1,123
Re: ABS Pump Delete Brake Manifold

You might have to live with that light Phil. My ABS light comes on each time I start the engine and drive it for 3 miles or more, and stays on until I turn off the engine and restart it, at which time it resets itself, only to come on again within 3 miles of driving. The reason that this happens with my car is because I have the ET Streets on, and the ABS asensors are not reading the same speed at all wheels due to the difference in size on the front/rear tires. You can always take out the bulb if needed though, since you are no longer ABS equipped anyways. I asked my tuner about turning off the light and he told me that he couldn't.
__________________
04 Mach1 5-spd, NOS (100 shot), goes 11.7's in the 1/4
manny is offline   Reply With Quote
Old 08-08-2006, 08:52 PM   #14
DTMach1
semi-pro moderator
 
DTMach1's Avatar
 
Join Date: May 2004
Location: Virginia Beach
Posts: 4,955
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by manny
You might have to live with that light Phil. My ABS light comes on each time I start the engine and drive it for 3 miles or more, and stays on until I turn off the engine and restart it, at which time it resets itself, only to come on again within 3 miles of driving. The reason that this happens with my car is because I have the ET Streets on, and the ABS asensors are not reading the same speed at all wheels due to the difference in size on the front/rear tires. You can always take out the bulb if needed though, since you are no longer ABS equipped anyways. I asked my tuner about turning off the light and he told me that he couldn't.
Anyone have a usable wiring diagram to the PCM? I think you should be able to pull the ABS refrence line from the 'puter...but who knows.
__________________

2004 Mach 1
IUP/5spd/DSG
Engine, etc done...sits in the garage
DTMach1 is offline   Reply With Quote
Old 08-09-2006, 05:56 AM   #15
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by manny
You might have to live with that light Phil. My ABS light comes on each time I start the engine and drive it for 3 miles or more, and stays on until I turn off the engine and restart it, at which time it resets itself, only to come on again within 3 miles of driving. The reason that this happens with my car is because I have the ET Streets on, and the ABS asensors are not reading the same speed at all wheels due to the difference in size on the front/rear tires. You can always take out the bulb if needed though, since you are no longer ABS equipped anyways. I asked my tuner about turning off the light and he told me that he couldn't.
Manny,

Your right, my ABS light has been on since last year when I pulled the rear sensors & exciter rings. Earlier this year I pulled the fuse to ABS pump & now just recently removed the pump. I may just remove the bulbs, I have the air bag & abs light that stay on all the time.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 10-26-2007, 11:35 PM   #16
YellowMenace
Registered User
 
YellowMenace's Avatar
 
Join Date: Nov 2003
Location: Schertz, TX
Posts: 2,639
Re: ABS Pump Delete Brake Manifold

If any of you guys put on one of these and have no use for your ABS controller (the eletronic part, not the physical part the manifold replaces), I'm interested in one. My ABS turns it's self off erratically and my Ford brake tech thinks its the controller.
__________________
Zinc yellow NMRA Factory Stock configuration Coyote 5.0 engine, FRPP Control Pack and a bunch of other stuff. Best ET in this configuration 10.693@123
YellowMenace is offline   Reply With Quote
Old 10-28-2007, 02:07 AM   #17
MACHYOUNG
Registered User
 
MACHYOUNG's Avatar
 
Join Date: Jun 2004
Location: Garden Grove, CA
Posts: 394
Re: ABS Pump Delete Brake Manifold

OK Phil, I'm in the market for one. With the 9" install went the ABS sensors and rings. May as well ditch 8+ lbs off the front of the car. Please let me know! Thanks.
Robert
__________________
03 Mach, Black, original auto, T56 as of 4/1/10
NA - 12.36@108.52 w/ 1.740 60' @ Fontana 1/15/06
N2O - 10.98@120.64 w/ 1.54 60' @ Famoso 11/17/07
MACHYOUNG is offline   Reply With Quote
Old 10-28-2007, 10:16 AM   #18
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by MACHYOUNG View Post
OK Phil, I'm in the market for one. With the 9" install went the ABS sensors and rings. May as well ditch 8+ lbs off the front of the car. Please let me know! Thanks.
Robert

Rob,

OK, I'll contact you by PM! I don't have any made up now, I will have to purchase some T-6061 stock.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 10-28-2007, 10:42 AM   #19
4-v mach
Sold & Parting Out
 
Join Date: Oct 2007
Location: Palm Beach Gardens, FL
Posts: 1,164
Re: ABS Pump Delete Brake Manifold

hey phil,

i cetrainly want one for my mach...im just trying to find some spare time to take pics of that 96 cobra pump for you too...thanks!
__________________
04 AB 5sp IUP
Every Bolt-On Imaginable
Full Tubular Drag Suspension
Moser 35-Spline, Spool, C-Elim's, 4.88's, etc.
Zex 100 Shot
SCT by Justin @ VMP Tuning
15x10 Beadlock & 17x4.5 Aluma-Star 2.0's
M/T 28x10.5 ET Drags
Massive Diet = 2950 lbs


stock: 408hp, 438tq on 100 shot: 11.03 @ 127.3

Aluma-Star's 4 SALE Best Offer
Al Papitto built ~11.5:1, .020 over Teksid, custom Comp cams, custom CP domed pistons, ported heads/intake by Kris Starnes
513hp, 410tq on 100 shot: 10.79 @ 133.1
4-v mach is offline   Reply With Quote
Old 07-25-2008, 02:50 AM   #20
Greg_RD
Registered User
 
Join Date: Jul 2008
Location: Santo Domingo, D.R.
Posts: 1
Smile Re: ABS Pump Delete Brake Manifold

Excuse me Phil,

I have a 1994 Ford Mustang GT (actually stroked to 347 and blown), my ABS module is not working so i might as well remove it since it only adds extra weight. I also have a friend with the same problem in a 1995 Mustang GT. I am very interested in ordering two of your ABS Module Delete. My email is greg_guzman24@hotmail.com.

Please contact me as to all the available information to the Delete module as well as the instructions for purchasing two of them.


Thanks,

Greg
Greg_RD is offline   Reply With Quote
Old 07-25-2008, 09:21 PM   #21
UCF_stang
KOOL-A1D
 
Join Date: Oct 2007
Location: Orlando, FL
Posts: 18
Re: ABS Pump Delete Brake Manifold

About six months since i have had mine and it works absolutely flawlessly.
__________________
-1996 Mystic Cobra
11.57 @117
stock motor
stock tranny
stock rear
.55/.37 nitrous jets
UCF_stang is offline   Reply With Quote
Old 07-26-2008, 01:15 PM   #22
rcodemach1
Registered User
 
rcodemach1's Avatar
 
Join Date: Jan 2004
Location: san diego, ca
Posts: 1,461
Re: ABS Pump Delete Brake Manifold

I have one from Phil but plans changed for the car & I'm not going to use it. A very nice part by the way. It's still in the original package. PM me for pricing.
__________________

'03 Mach, Oxford White, 5-spd, Eaton
'03 Mach, Black, automatic (parting out)
'98 GT, 410w, C4, Vortech

rcodemach1 is offline   Reply With Quote
Old 07-26-2008, 01:39 PM   #23
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by Up2par View Post
Phil, are these still available. If so, I need one 2002 GT, lmk
Thanks for your order Frank.

Quote:
Originally Posted by Greg_RD View Post
Excuse me Phil,

I have a 1994 Ford Mustang GT (actually stroked to 347 and blown), my ABS module is not working so i might as well remove it since it only adds extra weight. I also have a friend with the same problem in a 1995 Mustang GT. I am very interested in ordering two of your ABS Module Delete. My email is greg_guzman24@hotmail.com.

Please contact me as to all the available information to the Delete module as well as the instructions for purchasing two of them.


Thanks,

Greg
PM has been sent to you, thanks for your interest.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 08-17-2008, 12:42 PM   #24
Bert5.0
Registered User
 
Join Date: Aug 2008
Location: wichita, ks
Posts: 7
Re: ABS Pump Delete Brake Manifold

I need one for my 1994 Mustang GT.
Bert5.0 is offline   Reply With Quote
Old 08-19-2008, 03:29 PM   #25
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: ABS Pump Delete Brake Manifold

Quote:
Originally Posted by Bert5.0 View Post
I need one for my 1994 Mustang GT.
Sorry, I did not see this post. My PayPal account is: pbastian@adelphia.net

Once I recieve the money, I will get it machined and in the mail in about 2 weeks.

Thanks!
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:59 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<