|
08-11-2018, 09:13 AM | #101 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: New build
Looks good!
I need to get one of those work lights you’ve got
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
08-13-2018, 12:14 PM | #102 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Re: New build
I'm not familiar with all the different cage setups and structural workings etc. that is done when you build a setup like this. The frame tie ins you added are pretty **** cool. Is that something you need when you tube out the rear, or more of a typical strengthening for the type of power you'll be putting down?
__________________
|
08-17-2018, 11:46 AM | #103 |
Mach-T
Join Date: Jun 2004
Location: DFW
Posts: 2,865
|
Re: New build
your main loop is fitting in very nicely! Love how tight it is.
Once it is tacked in, how do you weld the top of the bars?
__________________
Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP |
08-17-2018, 11:50 AM | #104 | |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: New build
Quote:
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... Last edited by littlemags; 08-17-2018 at 12:19 PM. |
|
08-17-2018, 11:53 AM | #105 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: New build
. Great question. My side outriggers are not full welded BUT tacked. Once everything is tacked in top I will cut the outrigger tacks and basically drop the cage down so we can tig the top of the bars. A quick lift and jack under the outriggers they will be back in place. At that point make sure everything is level again and final weld outriggers in place. I will post pics this weekend
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
08-17-2018, 12:04 PM | #106 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: New build
couple update pics...i welded my Merillat upper control arm mount in place solid. Leveled and came out good for a rookie welder.
Rear is Team z outlaw rear end shortened to 46". Once i add axles and brakes I will be a little over 51"...This (from my calculations) put me with a 15x12 rim with 4-4.5" backspacing. The rims should fit under the vehicle nicely. I will use a more concise measurement once I get to that point BUT for now...fitting everything up so see where I am at. Will need to powdercoat rear end after I tack in upper shock mount bar for the coilovers. If everything goes well I will mount upper mount and then rip that rear out and install Merillat lower control mounts shortly.
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
08-17-2018, 12:22 PM | #107 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: New build
Awesome Job going on here!
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
09-01-2018, 03:27 PM | #108 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: New build
shocks fitted...everything fits great...will pull down rear end and send to powder coat. replacing BOTH lower torque boxes...
ok...this isnt a hard thing to do BUT it is messy and time consuming...this will take care of the drivers side lower torque box that was starting to pull away from stock location. drivers side wheel tub fit into location as well... Roy cole has been helping with the cage so once we are done with that I will start tacking the tubs and seam sealing everything before paint...
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
09-01-2018, 10:30 PM | #109 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: New build
Awesome job and progress mags.
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
11-27-2018, 03:00 PM | #110 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: New build
been slow on getting stuff done BUT a few update pics...HUGE thanks to Roy for his help
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
12-03-2018, 10:01 PM | #111 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: New build
Awesome!!! Guessing Dynamat to finish it off??
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
12-04-2018, 01:41 PM | #112 |
Registered User
Join Date: Jul 2004
Location: Raleigh , NC
Posts: 2,093
|
Re: New build
Dynamat?? Dynamat equal weight.
__________________
2004 Torch Red Procharged Mach 1 |
12-04-2018, 05:39 PM | #113 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: New build
lol...no dynamat....
I will epoxy finish all the interior flooring and UNDER the car. I plan on painting the entire inside floor/ underside with hammer coat black.
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
03-10-2019, 08:25 PM | #114 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: New build
couple more update pics....
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
03-10-2019, 08:27 PM | #115 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: New build
i know it doesnt look like a lot.....but have gotten a bit done. thanks again to ROY for all his help....couldnt have gotten this far without his help for sure
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
03-14-2019, 03:14 PM | #116 |
Registered User
Join Date: Jul 2004
Location: Raleigh , NC
Posts: 2,093
|
Re: New build
Hell yeah! Thanks for the updated pics!
__________________
2004 Torch Red Procharged Mach 1 |
04-04-2019, 05:56 PM | #117 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: New build
more pics..painted inside and re-shoot the engine bay....fitting doors back on with fenders and hood...then re-shoot the outside with fresh CX (dark shadow grey) paint....
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
04-14-2019, 06:57 AM | #118 |
Registered User
Join Date: Feb 2013
Location: Ny
Posts: 32
|
Re: New build
what head gaskets did you use with the procharger set up? 20 psi 100 shot?
|
04-17-2019, 03:40 PM | #119 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: New build
cometic....
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
05-03-2019, 10:03 AM | #120 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: New build
Looking good! Are you on M1R on Facebook?
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
05-06-2019, 02:35 PM | #121 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: New build
to be honest...I don't know...I will look
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
11-11-2019, 12:48 AM | #122 |
Registered User
Join Date: Jan 2005
Location: Durham/Canada
Posts: 236
|
Re: New build
Any updates on your build!
Fantastic job!
__________________
1982 GT 2003 Mach 1 2003 Marauder 2011 Shelby GT 500 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|