2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 06-15-2009, 06:43 PM   #1
Dan03mach
Spool'n UP
 
Dan03mach's Avatar
 
Join Date: Nov 2003
Location: DFW TX
Posts: 3,952
Official Turbo HP/TQ Thread

Got this off of SVT and I thought it would be nice to have a Turbo Thread over here. So post up what you have.

Sticky Please

Turbo Manfacturer:
Single or Twin or Hellraiser:
A/R Type:
Stock or Modified Cold Side Piping:
Stock or Modified Downpipe:
Heads:
Intake Type:
Boost:
Boost Controller Type: Electronic or Manual:
Electric Cut Out, Yes or No:
Wastegate: Open or Closed:
Intercooler: Stock or Modified:
Timing: How Much?
Cams:
Engine Mods:
Headers:
Gas: Pump of Race
Start Spool:
Full Spool:
RWHP:
RWTQ:
Type of Dyno Used: Mustang or DynoJet:
Draw Thru or Blow Thru:
Air Fuel Ratio:
__________________
03 Dark Shadow Grey Mach1
"SMOKEY"

"SLOW STREET CAR"

Mods:

Turbocharged
9 Sec. Slow Street Car
Dan03mach is offline   Reply With Quote
Old 06-15-2009, 06:51 PM   #2
Dan03mach
Spool'n UP
 
Dan03mach's Avatar
 
Join Date: Nov 2003
Location: DFW TX
Posts: 3,952
Re: Offical Turbo HP/TQ Thread

Turbo Manfacturer: Dan03mach Custom
Single or Twin or Hellraiser: Single Turbonetics T76
A/R Type: .96
Stock or Modified Cold Side Piping: 2.5"-3"
Stock or Modified Downpipe: Single 3" to dual 2.5"
Heads: Stock 03 Ported by NAZ
Intake Type: Stock
Boost:20lbs
Boost Controller Type: Electronic or Manual:Manual
Electric Cut Out, Yes or No: No
Wastegate: Open or Closed: Closed
Intercooler: Stock or Modified: Modified
Timing: How Much?17*
Cams:Comp XE274
Engine Mods:Forged .020" over bore
Headers:Custom shorties
Gas: Pump of Race: 104
Start Spool:3k
Full Spool:4k
RWHP:745
RWTQ:715
Type of Dyno Used: Mustang or DynoJet: DynoJet
Draw Thru or Blow Thru: Blow Thru BA 2800
Air Fuel Ratio: 10.0


Updated numbers will come when tune is complete.
__________________
03 Dark Shadow Grey Mach1
"SMOKEY"

"SLOW STREET CAR"

Mods:

Turbocharged
9 Sec. Slow Street Car

Last edited by Dan03mach; 11-19-2009 at 11:14 AM.
Dan03mach is offline   Reply With Quote
Old 06-15-2009, 09:46 PM   #3
DTMach1
semi-pro moderator
 
DTMach1's Avatar
 
Join Date: May 2004
Location: Virginia Beach
Posts: 4,955
Re: Offical Turbo HP/TQ Thread

I'm in a giving mood today....
__________________

2004 Mach 1
IUP/5spd/DSG
Engine, etc done...sits in the garage
DTMach1 is offline   Reply With Quote
Old 07-03-2009, 09:36 PM   #4
tom281
forty-six & 2
 
tom281's Avatar
 
Join Date: Jan 2005
Location: NE Indiana
Posts: 508
Re: Official Turbo HP/TQ Thread

Any more turbo Mach's here?
__________________
tom281
Current: 2003 Mach 1: black on black auto
Basic bolt ons
Previous:
2006 Vista Blue GT 11.74 @ 119, 3880lbs 450hp/450tq


My keeper:
'92 GT Convertible
Emerald Green w/ White Lthr & Top
Original Owner
tom281 is offline   Reply With Quote
Old 07-08-2009, 04:30 PM   #5
icutice2
twinturbomach
 
icutice2's Avatar
 
Join Date: Jul 2007
Location: lavergne tennessee
Posts: 341
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by tom281 View Post
Any more turbo Mach's here?
Here is what I got. It works for me
__________________
TWIN HP 57MM TURBOS. BOSS BLOCK 5.5 L STROKED ENGINE. FULL BALANCED AND BLUE PRINTED, FULL RACE HEADS AND STAGE III CUSTOM GRIND CAMS
TKO 600 ROAD RACE TRANNY
TWIN DISC CLUTCH
RETURN FUEL SYSTEM
80LBS INJECTORS
FULL RACE SUSPENSION
18LBS DUAL WASTEGATE SPRINGS
TWIN 62MM THROTTLE BODY
KENNY BELL BAP AND BAS
MAFIA BIG AIR CHIP
AND MORE FUN STUFF
PUMP GAS 776RWHP 16LBS BOOST
C-16 RACE 981 RWHP 20LBS BOOST

I RACE CROTCH ROCKETS FOR FUN
icutice2 is offline   Reply With Quote
Old 07-08-2009, 11:50 PM   #6
macher03
Grab your gear...
 
macher03's Avatar
 
Join Date: Nov 2004
Location: Western North Carolina
Posts: 1,324
Re: Official Turbo HP/TQ Thread

Here ya go:

Turbo Manfacturer: Garrett T-76
Single or Twin or Hellraiser: Single
A/R Type:
Stock or Modified Cold Side Piping: Modified
Stock or Modified Downpipe: Modified stock
Heads:
Intake Type:
Boost: 8psi
Boost Controller Type: Electronic or Manual: manual
Electric Cut Out, Yes or No: No
Wastegate: Open or Closed: Closed
Intercooler: Stock or Modified: Stock
Timing: How Much?
Cams:
Engine Mods: None
Headers:
Gas: Pump
Start Spool:
Full Spool:
RWHP: 470
RWTQ: 480
Type of Dyno Used: Mustang
Draw Thru or Blow Thru: Draw Thru
Air Fuel Ratio: 14.6
__________________
Turbo-charged 2003 OxFord White Mach 1 "Mandy"
Custom tuned by Amazon Tuning Solutions SOLD 11/01/10

1994 Mustang GT Grabber Blue Roadcar "Roxy" SOLD 10/23/2011



Two defining forces died for you. Jesus Christ died for your soul. The American Soldier died for your freedom. Think about it.
'Those who hammer their guns into plows will plow for those who do not.'
~ Thomas Jefferson
macher03 is offline   Reply With Quote
Old 07-09-2009, 09:15 PM   #7
Turbostang
Registered User
 
Join Date: Feb 2007
Location: League City,Tx
Posts: 485
Re: Official Turbo HP/TQ Thread

Turbo Manfacturer:Master Power T76
Single or Twin or Hellraiser:Single
A/R Type:.96
Stock or Modified Cold Side Piping:Custom
Stock or Modified Downpipe:Custom
Heads: Stock
Intake Type:
Boost:18psi
Boost Controller Type: Electronic or Manual:Electric
Electric Cut Out, Yes or No:Yes
Wastegate: Open or Closed:
Intercooler: Stock or Modified:5 inch core Air to Air
Timing: How Much?
Cams:Stock
Engine Mods:Manley and A.R.P everything
Headers:Stock
Gas: Pump of Race Race 109oct
Start Spool:
Full Spool:
RWHP:725rwhp
RWTQ:757trq
Type of Dyno Used: Mustang or DynoJetynojet
Draw Thru or Blow Thruraw Thru
Air Fuel Ratio:10.8
__________________
http://i61.photobucket.com/albums/h5...11/mach078.jpg
Single T76.Nothing big ****4 Sale****
Turbostang is offline   Reply With Quote
Old 07-10-2009, 10:00 AM   #8
chernandez88
Registered User
 
chernandez88's Avatar
 
Join Date: Apr 2007
Location: Miami, FL
Posts: 510
Re: Official Turbo HP/TQ Thread

Here ya go:

Turbo Manfacturer: Garret 60
Single or Twin or Hellraiser: Twin
A/R Type: .61
Stock or Modified Cold Side Piping: 3.0"
Stock or Modified Downpipe: 2.5"
Heads:Stock
Intake Type:Stock
Boost: 6psi
Boost Controller Type: Electronic or Manual: Electronic
Electric Cut Out, Yes or No:
Wastegate: Open or Closed: Closed
Intercooler: Stock or Modified: 3.5"
Timing: 13*
Cams: Stock
Engine Mods: Stock
Headers:
Gas: Twin Walboro
Start Spool: 2k
Full Spool: 4800
RWHP: 465
RWTQ: 502
Type of Dyno Used: Mustang
Draw Thru or Blow Thru: Blow Thru
Air Fuel Ratio: 11.0
__________________
2004-Torch Red 5 Speed W/ IUP

Single 74mm Borg Warner S400
980HP-925TQ @ 25.8PSI & 15 degree Timing
chernandez88 is offline   Reply With Quote
Old 08-27-2009, 12:39 AM   #9
Dan03mach
Spool'n UP
 
Dan03mach's Avatar
 
Join Date: Nov 2003
Location: DFW TX
Posts: 3,952
Re: Official Turbo HP/TQ Thread

I'm about to retune mine pretty soon. My clutch was starting to slip on my last dyno outing, then I finsihed it off at the track. I found out that i had a lot of exhaust leaks from the headers. We did manage to get 608rwhp out of 13lbs with 18 degs of timing but I wanted to turn it up to 18 or so but all the leaks wouldn't let me. I have now fixed them all and just waiting on my clutch disc to get here and new flywheel. I pulled the trans out today and the disc, pressure plate, and flywheel and pretty much shot. I'll be back on the dyno with some good fuel next time so I can hopefully turn it up. I want to try to hit mid 700 range at 20psi. Even after the retune with the SCT software now instead of Diablo the car drive so much better, almost like stock. I'm really starting to like this car again. It has been a big pain in the butt lately but that was mainly from the tunning with the diablo software. For some reason my car doesn't like it at all.
__________________
03 Dark Shadow Grey Mach1
"SMOKEY"

"SLOW STREET CAR"

Mods:

Turbocharged
9 Sec. Slow Street Car
Dan03mach is offline   Reply With Quote
Old 09-02-2009, 06:18 PM   #10
Roy
Registered User
 
Roy's Avatar
 
Join Date: Jul 2005
Location: S.E. Mich.
Posts: 3,446
Re: Official Turbo HP/TQ Thread

Turbo Manfacturer: Roy Built
Single PT-76 GTSH A/R Type: .96
Downpipe: Single 3"
Heads: Stock 03 Ported
Intake Type: Modified Stock
Boost:20lbs
Boost Controller Type: Electronic Turbo Smart Eboost 2
Wastegate: Open or Closed: Open
Intercooler: Cobra A/W
Timing: How Much? 22*
Cams: Custom HP Turbo cams
Engine Mods:Forged .010" over bore
Headers:Custom shorties
Gas: Pump or Race: 110
Start Spool:3.8k
Full Spool:4.6k
RWHP:818
RWTQ:811
Type of Dyno Used: Mustang or DynoJet: DynoJet
Draw Thru or Blow Thru: N/A
Air Fuel Ratio: 10.2:1

Last edited by Roy; 04-05-2011 at 05:22 PM.
Roy is offline   Reply With Quote
Old 09-03-2009, 02:17 PM   #11
machgsxr
Registered User
 
machgsxr's Avatar
 
Join Date: Feb 2005
Location: San Antonio
Posts: 6,414
Re: Official Turbo HP/TQ Thread

Turbo Manfacturer: HP performance kit
Single or Twin or Hellraiser: twin 57's
A/R Type:
Stock or Modified Cold Side Piping: stock
Stock or Modified Downpipe: stock
Heads: stock
Intake Type: sullivan lower/ hpp upper
Boost: 8 #'s
Boost Controller Type: Electronic or Manual: manual
Electric Cut Out, Yes or No: no
Wastegate: Open or Closed: closed
Intercooler: Stock or Modified: stock hp performance
Timing: How Much?
Cams: stock
Engine Mods: stock 04 cobra longblock
Headers: stock hp performance shorties
Gas: Pump of Race : 91 pump
Start Spool: 3000
Full Spool: 3600
RWHP:
RWTQ:
Type of Dyno Used: Mustang or DynoJet:
Draw Thru or Blow Thru: hpx slot blow thru
Air Fuel Ratio: 11.7

11.71 @ 117 with 8#'s of boost.

Last edited by machgsxr; 02-09-2011 at 01:59 PM.
machgsxr is offline   Reply With Quote
Old 09-05-2009, 12:33 AM   #12
Dan03mach
Spool'n UP
 
Dan03mach's Avatar
 
Join Date: Nov 2003
Location: DFW TX
Posts: 3,952
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by Mach1Marauder View Post
Good to hear Dan.
Thanks Bill, you need to get a trans in your car. It's coming on 3 years now. Once the T56 I have goes up I'll be looking at putting an auto in mine as well. Might grab Jim's Lentec from him if he still has it.
__________________
03 Dark Shadow Grey Mach1
"SMOKEY"

"SLOW STREET CAR"

Mods:

Turbocharged
9 Sec. Slow Street Car
Dan03mach is offline   Reply With Quote
Old 09-08-2009, 08:57 PM   #13
tom281
forty-six & 2
 
tom281's Avatar
 
Join Date: Jan 2005
Location: NE Indiana
Posts: 508
Re: Official Turbo HP/TQ Thread

Anyone with a Hellion kit? Can't seem to find a whole lot of info on them for the Mach's.
__________________
tom281
Current: 2003 Mach 1: black on black auto
Basic bolt ons
Previous:
2006 Vista Blue GT 11.74 @ 119, 3880lbs 450hp/450tq


My keeper:
'92 GT Convertible
Emerald Green w/ White Lthr & Top
Original Owner
tom281 is offline   Reply With Quote
Old 09-08-2009, 08:59 PM   #14
Dan03mach
Spool'n UP
 
Dan03mach's Avatar
 
Join Date: Nov 2003
Location: DFW TX
Posts: 3,952
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by tom281 View Post
Anyone with a Hellion kit? Can't seem to find a whole lot of info on them for the Mach's.
Go over to SVTP and look under the terminator section then go to turbo cobras and there are plenty of them over there.
__________________
03 Dark Shadow Grey Mach1
"SMOKEY"

"SLOW STREET CAR"

Mods:

Turbocharged
9 Sec. Slow Street Car
Dan03mach is offline   Reply With Quote
Old 09-08-2009, 09:09 PM   #15
tom281
forty-six & 2
 
tom281's Avatar
 
Join Date: Jan 2005
Location: NE Indiana
Posts: 508
Re: Official Turbo HP/TQ Thread

Will do, thanks man.
__________________
tom281
Current: 2003 Mach 1: black on black auto
Basic bolt ons
Previous:
2006 Vista Blue GT 11.74 @ 119, 3880lbs 450hp/450tq


My keeper:
'92 GT Convertible
Emerald Green w/ White Lthr & Top
Original Owner
tom281 is offline   Reply With Quote
Old 11-19-2009, 11:17 AM   #16
Dan03mach
Spool'n UP
 
Dan03mach's Avatar
 
Join Date: Nov 2003
Location: DFW TX
Posts: 3,952
Re: Official Turbo HP/TQ Thread

Retuned the car on 20 psi, put down 745rwhp and 715 rwtq with 17* timing and a fat a/f of 10.0 there is a lot left on the table still. This was on 104 octane.
__________________
03 Dark Shadow Grey Mach1
"SMOKEY"

"SLOW STREET CAR"

Mods:

Turbocharged
9 Sec. Slow Street Car
Dan03mach is offline   Reply With Quote
Old 05-02-2010, 11:21 PM   #17
ScreamingMach46
Registered User
 
ScreamingMach46's Avatar
 
Join Date: Dec 2008
Location: Chicago, IL
Posts: 907
Re: Official Turbo HP/TQ Thread

Any updates? Anybody using the Hellion single kit?
__________________
2004 Mach 1 - Screaming Yellow - 5 speed - IUP - 1 of 624
Full Bolt-ons, Built Rear, NX 100 shot, tune by Tim Barth @ MPH
N/A - 12.7 @ 107 (1.70)
N2O - 380rwhp 487rwtq
12.03 @ 110 (1.55)

SOLD

2004 Cobra - Screaming Yellow - T56 - 1 of 299
KB 2.8H @ 20lbs, 98 Intake Cams, E85, Tune by Tim Barth @ MPH
711rwhp 635rwtq
ScreamingMach46 is offline   Reply With Quote
Old 11-02-2010, 11:46 AM   #18
Harryt2t
Registered User
 
Harryt2t's Avatar
 
Join Date: Jun 2004
Location: Zebulon Nc
Posts: 171
Re: Official Turbo HP/TQ Thread

Turbo Manfacturer: Garrett twin 57's
Single or Twin or Hellraiser: twin
A/R Type:
Stock or Modified Cold Side Piping:modified
Stock or Modified Downpipe:modified
Heads: stock hand ported
Intake Type:custom avaitor built in my shed
Boost:13psi
Boost Controller Type: Electronic or Manual:elec
Electric Cut Out, Yes or No:no
Wastegate: Open or Closedpen
Intercooler: Stock or Modified:custom
Timing: How Much?12 deg
Cams:stage 2 crower blower cams
Engine Mods:.020 over cp pistons cast iron block billet rods
Headers:custom
Gas: Pump of Race 93 octane
Start Spool:3000
Full Spool:3500
RWHP:775
RWTQ:654
Type of Dyno Used: Mustang or DynoJet:dynojet
Draw Thru or Blow Thru:blow thru
Air Fuel Ratio: 11.5
__________________
Harry Thompson
Torch Red 2004 Mach 1
Haywood Ported Heads
Crower stage 2 blower cams
Crower Springs and Titianum retainers
Modified Aviator intake
Twin ford Gt pumps
Magnapack cat back
alum driveshaft
black bullit rims
bfg drag radials
Harryt2t is offline   Reply With Quote
Old 04-05-2011, 03:05 PM   #19
Dan03mach
Spool'n UP
 
Dan03mach's Avatar
 
Join Date: Nov 2003
Location: DFW TX
Posts: 3,952
Re: Official Turbo HP/TQ Thread

i swapped to a TH400 auto and retuned the car on E85 but ran out of fuel pump after 16lbs of boost. at 16lbs it put down 650rwhp 600rwtq
__________________
03 Dark Shadow Grey Mach1
"SMOKEY"

"SLOW STREET CAR"

Mods:

Turbocharged
9 Sec. Slow Street Car
Dan03mach is offline   Reply With Quote
Old 04-05-2011, 04:37 PM   #20
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by Dan03mach View Post
i swapped to a TH400 auto and retuned the car on E85 but ran out of fuel pump after 16lbs of boost. at 16lbs it put down 650rwhp 600rwtq
That TH400 soaks up a lot though so that's not a big deal. If you can't hit a 9.99 or less with that then hang it up.
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 04-05-2011, 06:32 PM   #21
Dan03mach
Spool'n UP
 
Dan03mach's Avatar
 
Join Date: Nov 2003
Location: DFW TX
Posts: 3,952
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by Scott McClure View Post
That TH400 soaks up a lot though so that's not a big deal. If you can't hit a 9.99 or less with that then hang it up.
Yeah the TH400 soaked up a 100rwhp over the 6spd I had on the same boost level. BTW I picked up a 100rwhp more by using E85 over pump gas on the same boost level. Doing nothing at all to the tune it picked up 45rwhp just by changing fuels. We tweaked on the tune and it picked up exactly a 100rwhp more.
__________________
03 Dark Shadow Grey Mach1
"SMOKEY"

"SLOW STREET CAR"

Mods:

Turbocharged
9 Sec. Slow Street Car
Dan03mach is offline   Reply With Quote
Old 04-05-2011, 07:46 PM   #22
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by Dan03mach View Post
Yeah the TH400 soaked up a 100rwhp over the 6spd I had on the same boost level. BTW I picked up a 100rwhp more by using E85 over pump gas on the same boost level. Doing nothing at all to the tune it picked up 45rwhp just by changing fuels. We tweaked on the tune and it picked up exactly a 100rwhp more.
Man I wish CT would get E85.
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 04-05-2011, 08:34 PM   #23
Dan03mach
Spool'n UP
 
Dan03mach's Avatar
 
Join Date: Nov 2003
Location: DFW TX
Posts: 3,952
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by Scott McClure View Post
Man I wish CT would get E85.
This is me running a 03 cobra with a 3.4L whipple at 19lbs on pump gas. I let out early it was starting to get nasty. lol

http://vimeo.com/21868883
__________________
03 Dark Shadow Grey Mach1
"SMOKEY"

"SLOW STREET CAR"

Mods:

Turbocharged
9 Sec. Slow Street Car
Dan03mach is offline   Reply With Quote
Old 07-01-2011, 11:57 PM   #24
bigjohnsonDOHC
Registered User
 
bigjohnsonDOHC's Avatar
 
Join Date: Apr 2008
Location: Auburn, MA
Posts: 315
Re: Official Turbo HP/TQ Thread

would a t76 with a .96 a/r be too big for a stock mach 1?
__________________
2003 Black Mach 1
-SLP LM1, KN intake, subframe connectors, UPR x-pipe w/ high flow cats
bigjohnsonDOHC is offline   Reply With Quote
Old 07-11-2011, 08:43 PM   #25
aloe03
Registered User
 
aloe03's Avatar
 
Join Date: Jan 2003
Location: Southern Indiana
Posts: 66
Re: Official Turbo HP/TQ Thread

Turbo Manfacturer: Custom Kit with Turbonetics 62mm
Single or Twin or Hellraiser: Single
A/R Type:
Stock or Modified Cold Side Piping: Custom
Stock or Modified Downpipe: Custom
Heads: Stock
Intake Type: Stock
Boost:10Psi
Boost Controller Type: Electronic or Manual: None
Electric Cut Out, Yes or No: No
Wastegate: Open or Closed:
Intercooler: Stock or Modified: Custom
Timing: How Much? 14 degrees
Cams: Stock
Engine Mods: Stock
Headers:Stock Manifolds
Gas: Pump of Race: Pump
Start Spool:2500
Full Spool: 2800
RWHP: 472
RWTQ:540
Type of Dyno Used: Mustang or DynoJet: Mustang
Draw Thru or Blow Thru: Blow Thru
Air Fuel Ratio: 11.6
__________________
03 Oxford White Mach 1 with Custom Turbo Setup
Built engine and bigger turbo coming soon!
aloe03 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:50 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<