|
|
08-02-2017, 03:21 PM | #1 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 323
|
Looking for alumastar pics
Hey guys, I'm looking for pics of alumastar 2.0's on mach 1's. I think I'm going to run a 17x4.5" up front because I don't want to switch to gt brakes or run a spacer. For the rear I don't know what size or back spacing to run. I'm going to run a 26x10.5x15 tire (eventually 28" when I run out of gear in the 1/4). I currently run that size tire on a small steel wheel with no issues, but I want to step up to lightweight stuff. I'm still up in the air for polished vs black and bealdock vs non. Opinions? So those of you running those wheels, or similar, could you post pics and post the size/ what you had to do to make them fit? I found a thread with alumastar pics, but the pictures would not show up due to photobucket account stuff.
Thanks
__________________
2003 Mach 1- Azure Blue-Manual- Intake/exhaust/ 01 cobra cams/ NX wet kit- 351 rwhp 350 rwtq N/A- 460 rwhp 557 rwtq 100 shot. |
08-03-2017, 01:53 PM | #2 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 323
|
Re: Looking for alumastar pics
So iv discovered champion wheels, and I think I'm going to go with them for the rear. 15x10, what back spacing? 5.5 or 6.5? They only come in beadlock, should I get the single as they come, or double for 200 bucks more per wheel? Iv read single can cause problems with different stress on either side of the tire. The car will probably never go faster than 9.99 once all is said and done.
__________________
2003 Mach 1- Azure Blue-Manual- Intake/exhaust/ 01 cobra cams/ NX wet kit- 351 rwhp 350 rwtq N/A- 460 rwhp 557 rwtq 100 shot. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|